MCE Technologies Xcaret Pro User manual

Xcarét Pro
Expansion Bay Hard Drive
User’s Guide
http://www.mcetech.com

MCEXcarétProExpansionBayHardDrive 1
Thank you for purchasing an MCE Xcarét Pro Expansion Bay Hard
Drive! We are sure that your new device will enrich your PowerBook
computing experience. If at any time you are unsure about or are having
difficulty with the installation or use of your new product, you may
request assistance by contacting MCE Technical Support via email at
[email protected] or by telephone at [phone] from 9:00 am
to 5:00 pm PST.
The MCE Xcarét Pro Expansion Bay Hard Drive is a compact, com-
pletely mobile storage solution for use in the right-side expansion bay of
your MacintoshPowerBook. Your drive comes formatted and initialized
and is therefore ready for use right out of the box. The Xcarét Pro comes
formatted with the MacOS Extended file format.
In order to get the most out of your new product, please read the next
several sections of this manual on the use and care of the MCE Xcarét
Pro Expansion Bay Drive.
Preparing to Use the Xcarét Pro Drive
MCE offers two types of Xcarét Pro expansion bay drives - the Xcarét Pro
98, for use with the PowerBook G3 Series-98 (Wall Street, Main Stree,
PDQt), and the Xcarét Pro-99/2000, used with the PowerBook G3 Series
99 (Lombard, Bronze) and the PowerBook 2000 (FireWire, Pismo).
Throughout this manual we will refer to the two Xcarét Pro models as
siimply Xcarét Pro, unless there is a major difference which requires
distinguishing between the two products.
To familiarize yourself with the Xcarét Pro drive, please note the MCE
label on the front of the drive to determine its proper orientation.
Xcarét Pro-98 Drive Xcarét Pro- 99/2000 Drive

2 MCEXcarétProExpansionBayHardDrive
To prevent any damage to the unit or your PowerBook, always insert the
Xcarét drive into the media bay with the top label facing upward and
with the blue MCE label facing outward.
Caution: Never insert the MCE Xcarét Pro Drive into the
PowerBook’s expansion bay with the MCE label first-in or
facing upside down.
Using the Xcarét Pro Drive
Getting Started
While one may insert the Xcarét Pro-98 drive into either the Power-
Book’s right or left expansion bay, the Xcarét Pro-99/2000 drive may
only be inserted into the expansion bay on the right side of the Power-
Book.
The Xcarét Pro drive may be inserted into the PowerBook expansion bay
while the computer is powered on or off.
To install the drive, remove any devices currently located in the expan-
sion bay where you will be using the Xcarét Pro drive. Be sure to quit
any applications or close any files running from the device before
removing it from the media bay. For details on removing devices, please
see your PowerBook manual.
With power off, insert the MCE Xcarét Pro drive into the expansion bay
of the PowerBook. Several seconds after starting the PowerBook, the
drive will automatically mount onto the Desktop and is ready for use.
Instructions for Hot-Swapping
Hot-swapping an expansion bay device refers to when you exchange one
expansion bay device for another while the PowerBook is still powered on.
Be sure to quit any applications or close any files running from the
current media bay device before removing it. Highlight the icon of the
current media bay device and select Put Away (Command-Y) from the
File Menu or simply drag the icon to the Trash. If there are multiple
!

MCEXcarétProExpansionBayHardDrive 3
partitions mounted for this device, repeat the sequence for all currently
mounted partitions. With the device icon(s) removed from the Desktop,
you can remove the current device from the PowerBook. Insert the
Xcarét Pro drive into the media bay. After several seconds, the drive’s
icon will mount onto the Desktop, and the drive is ready for use.
Using the Xcarét Pro as a Startup Drive
If your Xcarét Pro drive has a volume with a reliable System installed on
it, you may use the drive as the startup drive.
While the Xcarét Pro drive is installed in the PowerBook, launch the
Startup Disk Control Panel (which is usually accessible from the Apple
Menu) and select the Xcarét Pro drive to be the startup drive. Restart the
PowerBook.
You can also boot from the Xcarét Pro drive by simultaneously holding
down the Command, Option, Shift, and Delete keys during startup.
Make sure that the Caps Lock key is not depressed while performing this
operation.
While using the Xcarét Pro as a boot disk, you will not be able to swap
the drive with another device. In order to remove the Xcarét Pro drive,
select another non-Xcarét Pro volume to be the startup disk from the
Startup Disk Control Panel. Restart the PowerBook, booting from the
newly selected volume. You can then exchange the Xcarét Pro drive
with the desired device.
Important Usage Note
The MCE Xcarét Pro Expansion Bay Hard Drive is designed to with-
stand the normal, reasonable handling involved with mobile use. It is not
designed to handle abrupt shock such as that experienced in dropping,
pounding, banging or otherwise smashing the Xcarét Pro drive. Exercise
care when handling the Xcarét Pro drive and it will provide you with
reliable and extended storage capabilities. Be sure to always store the
Xcarét Pro drive in its handy protective case during transport while not in
the PowerBook, such as when inside a computer carrying case.

4 MCEXcarétProExpansionBayHardDrive
Note: When performing any type of hard drive software-
related activity such as formatting, initializing, partitioning,
etc., it is best to use the latest version of Apple’s Drive
Setup utility. This is generally found either in the Utilities
folder of your PowerBook’s hard drive, or on the latest
MacOS CD-ROM release. You may also find this at
Apple’s Software Updates FTP site.
Troubleshooting
The Xcarét Pro drive does not mount onto the Desktop.
• Make sure that the drive is completely and correctly inserted into
the expansion bay of the PowerBook.
•- Run the latest version of Apple’s Drive Setup utility.
- Select the Xcarét Pro drive in the list.
- Select the Mount command (Command-M) from the Functions
menu.
- If the Mount option is not enabled, re-initialize the drive (see
below).
Initializing the Xcarét Pro drive.
• Caution! Initializing the drive erases all data currently on it.
•Run the latest version of Apple’s Drive Setup utility.
•Select the Xcarét Pro drive from the list of drives.
• Click on Initialize... .
• Click on Custom Setup and select the MacOS formatting method
and other options you prefer. Click on OK.
• Click on Initialize.
• The drive should automatically mount onto the Desktop.
!

© 2001 Mac Components Engineered
MCE, the MCE logo and Xcarét Pro are trademarks of Mac Compo-
nents Engineered.
Apple, the Apple logo, Mac, the MacOS logo, Macintosh, and Pow-
erBook, are registered trademarks of Apple Computer, Inc.
Products and company names are trademarks of their respective com-
panies, and are mentioned for informational purposes only and con-
stitute neither an endorsement nor a recommendation.
Every effort has been made to ensure that the information in this
manual is accurate. All errors including photographic, printing,
typographical, and clerical are subject to correction. Information
in this document is subject to change without notice and does not
represent a commitment on the part of Mac Components Engi-
neered.
Mac Components Engineered
Irvine, California, USA
Sales: [phone]; [email protected]
Technical Support: [phone]; [email protected]
http://www.mcetech.com
Rev. 011002