McGREGOR MPW1810 User manual

PLEASE READ INSTRUCTION MANUAL FOR MORE DETAILS.
LACK OF PRESSURE?
REMOVE POSSIBLE AIRLOCKS!
RECONNECT WATER HOSE FOLLOWING INSTRUCTIONS
IN THE BOX
AHigh pressure washer
BCable storage
CScrew
DHandle
EHigh pressure hose
F
G
Turbo lance
H
Adjustable spray lance
I
Trigger gun
J
Detergent bottle
K
Water inlet male connector
L
Nozzle pin
M
Instruction manual
Gun storage
A
I
M
B
D
L
K
J
C
H
G
F
E
McGregor 1800W HIGH
PRESSURE WASHER
7368484 (Model: MPW1810)
Important - Please read these
instructions fully before starting assembly
These instructions contain important information that will help
you get the best from your pressure washer, ensuring it is
assembled correctly and safely. If you need help or have damaged
or missing parts, call the Customer Helpline on 0345 605 2062
AFTER SALES SUPPORT
0345 605 2062
QUICK START
GUIDE

Connect garden hose and water
supply. Let the water run through
the hose.
Makes sure the ON/OFF switch is
in the OFF position.
Unlock the safety trigger on the
spray gun and press the trigger to
pull the water through the machine,
until a steady stream of water runs
from the lance.
Detergent can only be used in
combination with the adjustable spray
lance in the low pressure setting.
Detergent can't be used with turbo
lance provided.
Install the inlet male connector,
connect garden hose (non-supplied)
and inlet connector, and turn the
water on.
1. ASSEMBLE 2. PREPARE 3. OPERATE
1 2
3 4
56
7 8 12 13
14 15
16
9
11
10
Connect to mains power. We
recommend to use a RCD device.
Insert the spray lance into spray gun,
and twist 1/4 turn to lock in position.
Check that it is rmly securely located
in place.
Special pressure washer
detergents can be used to increase
the cleaning power of the pressure
washer.
Jet spray adjustment is very aggressive.
Do not adjust while spraying. Switch the
machine o when interrupting your work
for extended periods of time.
Pull the trigger on the spray gun to
release a pressured water spray.
Power on the pressure washer.