Mealthy MultiPot User manual

5. Press the –button to adjust time to 2 minutes. The program will begin after 10 seconds
with the Preheating cycle and On will display on the LCD screen. Steam will release until
the float is fully raised. When pressure is reached the timer will begin counting down. When
the program is complete, the MultiPot will beep and automatically switch to Keep Warm.
You can let the pressure release naturally or use the quick release functionality.
Natural Release: do nothing, the pressure releases on its own. When the float is returned
to its down position the lid will unlock. Do not attempt to force open the lid.
Quick Release: turn the steam vent handle to Venting (keeping your fingers away from the
actual steam vent); pressure releases at a quicker pace. When the float is returned to its
down position the lid will unlock. Do not attempt to force open the lid.
Never place face, hands, or unprotected skin over the steam release valve when MultiPot is
running or releasing pressure.

You can easily sauté ingredients in your MultiPot, eliminating the need for extra pots and
pans! Follow these steps to use Sauté.
1. Place the steel pot inside the base and plug in your MultiPot. The LCD screen will
display OFF.
2. Select Sauté. Press Sauté again to change the temperature to either Low (simmering or
thickening sauces), Normal (default; browning or sautéing), or High (searing or stir-frying).
3. After 10 seconds the program will begin. Your MultiPot will beep 3 times and the LCD
screen will display ON to indicate that the MultiPot is preheating. The LCD screen will
display HOT when preheating is complete.
4. Add ingredients to the stainless steel pot and cook according to your recipe.
5. When you are finished using Sauté, press Cancel. The LCD screen will display OFF.
Never put lid on when using Sauté. As a safety precaution, warning alerts will sound and
the display will flash if the lid is put on during Sauté.
The MultiPot automatically switches to OFF after 30 minutes if you do not press Cancel.