MECHLINE HYGENIKX+ User manual

REVISION: 02/2021
©2021 All rights reserved. All material on these pages, including and without limitation text, logos, icons, photographs and all other artwork, is cop right material of Mechline Developments Ltd, unless otherwise
stated. Commercial use of this material may only be made with the express, prior, written permission of Mechline. This includes material provided by any third party, including material obtained through links
to other sites from Mechline’s pages or its affiliates and commercial associates. Material and information included are correct at time of print. Intending buyers and users must satisfy themselves as to the suitability and
safety of the products for their particular purposes and duties. Dimensions shown in mm unless otherwise stated. Product accreditation may not apply to all products in the relevant range. Please contact Mechline
to confirm. Unless otherwise stated, all products carry a warranty of twelve (12) months against manufacturing defect or workmanship on parts with no inclusion for labour or site attendance. (HYG-INS-KIT)
MECHLINE DEVELOPMENTS LIMITED | Telephone: [phone] | Email: [email protected] | Web: www.mechline.com
• The lamps and battery must be replaced every year to ensure optimum performance of the system.
• FOOD area models are supplied with food safe lamps which have a shatter-proof protective sheath around the lamp.
The protective sheath is an integral part of the lamp and must not be removed.
• Please dispose of your old lamp and battery responsibly.
• For technical assistance contact: [email protected]
LAMP & BATTERY
INSTRUCTIONS






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

LAMP CHANGE






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

STEP 2






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

STEP 3






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

STEP 4






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP )


REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

(BATTERY instructions overleaf)






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

STEP 1

LAMP & BATTERY
INSTRUCTIONS
REVISION: 02/2021
©2021 All rights reserved. All material on these pages, including and without limitation text, logos, icons, photographs and all other artwork, is cop right material of Mechline Developments Ltd, unless otherwise
stated. Commercial use of this material may only be made with the express, prior, written permission of Mechline. This includes material provided by any third party, including material obtained through links
to other sites from Mechline’s pages or its affiliates and commercial associates. Material and information included are correct at time of print. Intending buyers and users must satisfy themselves as to the suitability and
safety of the products for their particular purposes and duties. Dimensions shown in mm unless otherwise stated. Product accreditation may not apply to all products in the relevant range. Please contact Mechline
to confirm. Unless otherwise stated, all products carry a warranty of twelve (12) months against manufacturing defect or workmanship on parts with no inclusion for labour or site attendance. (HYG-INS-KIT)
MECHLINE DEVELOPMENTS LIMITED | Telephone: [phone] | Email: [email protected] | Web: www.mechline.com
• The lamps and battery must be replaced every year to ensure optimum performance of the system.
• FOOD area models are supplied with food safe lamps which have a shatter-proof protective sheath around the lamp.
The protective sheath is an integral part of the lamp and must not be removed.
• Please dispose of your old lamp and battery responsibly.
• For technical assistance contact: [email protected]
BATTERY CHANGE
STEP 3
STEP 4






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER

REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

STEP 2






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

(LAMP instructions overleaf)






LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER







LAMP CHANGE
DISCONNECT UNIT
FROM ELECTRICITY
UNSCREW 2x FRONT
COVER CAPTIVE SCREWS
AND DETACH COVER
FIRMLY GRIP LAMP
TERMINAL/ CONNECTOR
END (OR END CAP) AND
CAREFULLY SLIDE LAMP
OUT OF THE SOCKET
(STEP )
CAREFULLY LIFT LAMP
(STEP ) AWAY FROM THE
SPRING CLIP AND
SOCKET(STEP ) 

REVERSE SEQUENCE
TO INSTALL NEW LAMP
DO NOT TOUCH LAMP GLASS AT ANY TIME!
ONLY GRIP BY END TERMINAL OR CAP

DO NOT TOUCH METAL FINS!
BATTERY CHANGE
DISCONNECT UNIT FROM
ELECTRICITY
UNSCREW 2x FRONT COVER
CAPTIVE SCREWS AND
DETACH COVER
REMOVE AND REPLACE
BATTERY AS SHOWN
SPRING CLIP
LAMP


OR




METAL FINS
Drawn by Checked by Approved by Date
1 / 1
Edition Sheet
Date
-
+
-
+
DRAINED
BATTERY
FULL BATTERY
REVERSE SEQUENCE TO
REPLACE AND SECURE COVER

STEP 1