MediaSonic GD-300 User manual

Mediasonic GD-300
USB-C Triple 4K Dock
www.mediasonicusa.com

Installing the Driver
NOTE: DO NOT connect the docking station to the computer before
completing the driver installation.
Windows
®
OS
1. Insert the provided CD into your disc drive.
2. Click Run Setup.exe to start the installation.
3. Click Finish to complete the installation if prompted.
NOTE:
a. If the AutoPlay does not start automatically, locate and double-
click on the Setup.exe file in the driver folder to launch the setup.
b. Enter the administrator password and click Yes, if a User
Account Control dialog box is prompted.
c. For some Windows Operating Systems, the driver will
automatically be installed. If you need to install the driver manually,
follow the instructions above.
Mac OS
®
1. Insert the provided CD into your disc drive and double-click the
dmg file to start the installation.
2. If the License agreement is prompted, click Continue to start the
driver installation.
3. Click Restart to complete the installation if prompted.

Connecting the Docking Station
ake sure the device (Desktop, Laptop…) is DisplayPort and HD I
embedded or bundled any adapter/connector with DisplayPort and
HD I.
Connect the docking station to your monitor or computer after driver
installation is completed.
Changing the Display Mode
Extra DisplayPort and HD I monitors can be connected through the
docking station directly. Once the extra monitors are connected, they
can be configured to use Mirror mode, Extend mode or set to be the
Primar displa .
Position the mouse anywhere on the Windows Desktop, right-click and
select Displa Settings.
Alternatively, click utility icon in the Windows S stem Tra , and
then select Displa Link Manager or Video Setup.
The Quick Installation Guide describes only the basic instructions on
installation. For more information, please refer to the User’s Manual on
the provided CD.

V1.0
USB-C Triple 4K Dock
Quick Installation Guide
Warranty & Technical Support:
Email:
[email protected]