MEDIATEK Genio 350 User manual

MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Version: 1.0
Release date: 2022-04-12
Use of this document and any information contained therein is subject to the terms and conditions set forth in
Exhibit 1. This document is subject to change without notice.
Genio 350 Evaluation Kit
Quick Start Guide

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 2 of 12
Version History
Version
Date
Author
Description
1.0
2022-04-12
MTK
First Release

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 3 of 12
Table of Contents
1Packing list ............................................................................................. 4
2Genio 350-EVK System Setup.................................................................. 5
3Genio 350-EVK Board overview.............................................................. 6
4Camera board installation ...................................................................... 7
5DC Jack installation................................................................................. 8
6LCM/Touch Panel installation (1/2) ........................................................ 9
7LCM/Touch panel installation (2/2).......................................................10
8Bracing frame installation .....................................................................11
9How to Power Up The System ...............................................................12

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 4 of 12
1Packing list
In box items
Qt'y
Note
1
Genio 350 EVK main board
1
2
AP1302 ISP board
2
Camera Board
3
AR0430 IAS sensor module
2
Camera Module
4
Mini-SAS cable
2
Camera Cable
5
TFT LCM MODULE 7 LCM+TP
1
6
FPC SSBE5 i350EVK
1
LCM FPC Cable
7
12V AC adaptor
1
8
AC cable
1
9
Plastic Pillars
4
10
Screw
4
Genio 350 EVK Document
http://download.mediatek.com/aiot/G350QSG

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 5 of 12
2Genio 350-EVK System Setup
Please refer below pictures for entire assembled Genio 350 EVK, the entire peripherals include:
1: LCM Module with Touch Panel * 1 sets
2: Camera double board * 2 sets
3: Connectivity module with 2 antennas * 1 sets
4: Power Adapter * 1 sets

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 6 of 12
3Genio 350-EVK Board overview
Please refer below picture for IO function overview of EVK.

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 7 of 12
4Camera board installation
Install procedure:
Insert Mini-SAS Cable into Genio 350 EVK mainboard and Camera board corresponded connector.
Connector locations can be referred to the marks in the picture as below.
Mini-SAS cable is tightened down well, you should hear “click" sound.

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 8 of 12
5DC Jack installation
Install procedure:
Plug Adapter into DC Jack connector.
After the EVK power is turned on, pay attention to the LED indicator is lighted on.
In normal condition, there are total 4 LED indicators will light, please refer the
marks of above picture.

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 9 of 12
6LCM/Touch Panel installation (1/2)
Install procedure:
Step1: Remove paper tape of the LCM/Touch Panel to release 2 FPC cables, as picture 1.
[picture 1]
Step2: Insert the LCM FPC cable one terminal into the FPC connector of the LCM/Touch Panel, as
picture 2. After cable inserted, the FPC connector must be pressed down firmly.
[picture 2]

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 10 of 12
7LCM/Touch panel installation (2/2)
Step3: Insert Touch Panel cable and LCM FPC cable into the FPC connector of the mainboard,
please refer picture 3 for cable position and direction. After cable inserted, the FPC connector must
be pressed down firmly.
[picture 3]

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 11 of 12
8Bracing frame installation
Install procedure:
Step1: Insert the screws into the screw holes on the front of the Genio 350EVK mainboard.
Step2: Tightening the Plastic Pillars from the back of the mainboard.
Please refer below picture for bracing frame assembled EVK

Genio 350 EVK
Genio 350 Evaluation Kit Quick Start Guide
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Page 12 of 12
9How to Power Up The System
After assembled all peripherals, now you can power on the EVK and start evaluation.
Step1: Connect UART0 to the computer via an USB cable. (If you want to see the logs.)
Step2: Plug in the DC 12V power adapter.
Step3: You will see the screen is shown on HDMI display and some trace logs in UART0.