
Warning: Carefully read the following instructions to reduce the risk of injury.
1) When not in use, please unplug the Full Body Pain Reliever™ from the wall
and the product itself.
2) Allow the product to have full range of motion, giving the product room to
cool.
3) Use this guide to assist others with disabilities or impairments, in the use
of this product.
4) Please use the Full Body Pain Reliever™ it accordance to this manual. Do
not use additional accessories recommended by other manufacturers.
1) After use or before cleaning the Full Body Pain Reliever™, please unplug
the product from the wall.
2) If water contact occurs, remove the plug from the wall.
3) Do not use this product while in the bathroom.
4) Avoid spills and contact with liquids while using the Full Body Pain
Reliever™.
Troubleshooting
If you encounter problems during use, please refer to the following
troubleshooting solutions. If the massager continues to fault, please turn off
using the power button and unplug from the wall. Users are not recommended
to disassemble or repair the massager by themselves. Call and ask the
manufacturer for assistance.
Condition Possible Reasons/Solutions
Unable to start
the massager
Make sure the power cord is plugged in from
both the wall and the product. Confirm the
power button has been turned on.
Sudden faults during
use
Confirm that the power cord has been is still
plugged into the wall and the product. Confirm
that the plug has a secure connection.
Press the power button to ensure the product is
on. After 15 minutes of use, the the Full Body
Pain Reliever™ timer has expired. Simply press
the power button to restart.
If overheating occurs, please turn off the main
power supply, and wait for the massager to
cool. If any problems persist, discontinue use
and contact the manufacturer.
Warning: Carefully read the following instructions to reduce the risk of injury.
Medical Breakthrough's Full Body Pain Reliever™ : Instruction Manual