Bob and Brad M00042AE12-US User manual

User Manual
M00042AE12-US/ M00042AE19-US
NECK & BACK MASSAGER

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
Read all instructions before using (this appliance).
DANGER
To reduce the risk of electric shock:
Always unplug this appliance from the electrical outlet immediately
after using and before cleaning.
DO NOT reach for an appliance that has fallen into the water.
Unplug immediately.
DO NOT use the massager while bathing or showering.
DO NOT place or store the appliance to fall or be pulled into a tub
or sink.
DO NOT place in or drop into water or other liquids.
Never use pins or other metallic fasteners with this appliance.
Carefully examine the covering before each use. Discard the
appliance if the covering shows any signs of deterioration, such as
blistering or cracking.
DO NOT operate it in a wet or moist environment. Keep the
massager dry.
DO NOT reach for an appliance that has fallen into water. Unplug
immediately.
DO NOT use while bathing or in a shower.
DO NOT place or store appliance where it can fall or be pulled into
a tub or sink. Do not place in or drop into water or other liquid.
Carefully examine the covering before each use. Discard the
appliance if the covering shows any sign of deterioration, such as
checking, blistering, or cracking.
Keep Dry – DO NOT operate in a wet or moist condition.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
1

WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
An appliance should never be left unattended when plugged in.
Unplug from outlet when not in use, and before putting on or
taking off parts.
DO NOT operate under blanket or pillow. Excessive heating can
occur and cause fire, electric shock, or injury to persons.
Close supervision is necessary when this appliance is used by, on,
or near children, invalids, or disabled persons.
Use this appliance only for its intended use as described in this
manual. DO NOT use attachments not recommended by the
manufacturer.
Never operate this appliance if it has a damaged cord or plug, if it
is not working properly, if it has been dropped or damaged, or
dropped into water. Return the appliance to a service center for
examination and repair.
DO NOT carry this appliance by supply cord or use cord as a
handle.
Keep the cord away from heated surfaces.
Never operate the appliance with the air openings blocked. Keep
the air openings free of lint, hair, and the like.
Never operate on a soft surface such as a bed or couch where the
air openings may be blocked.
Never drop or insert any object into any opening.
DO NOT use outdoors.
DO NOT operate where aerosol (spray) products are being used or
where oxygen is being administered.
To disconnect, turn all controls to the off position, then remove
plug from outlet.The device is NOT to be used for commercial use
or medical purposes. If you have health concerns, consult your
doctor before using the Shiatsu Neck and Back massager.
Use heated surfaces carefully. May cause serious burns. DO NOT
use over insensitive skin areas or in the presence of poor
circulation.
The unattended use of heat by children or incapacitated persons
may be dangerous.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
2

Temperatures sufficiently high to cause burns may occur regardless
of the control setting. DO NOT use on an infant or invalid or on a
sleeping or unconscious person.DO NOT use on insensitive skin or
on a person with poor blood circulation. Check the skin in contact
with the heated area of the appliance frequently to reduce the risk
of blistering.
DO NOT Crush – Avoid sharp folds.
DO NOT use massager in close proximity to loose clothing or
jewelry.
Keep long hair away from massager while in use.
CAUTION
SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
The symbol of an arrow-headed lightning bolt within a
triangle is intended to alert the user of uninsulated
"dangerous voltage" in the unit's enclosure. The excess
voltage may be of sufficient magnitude to constitute a risk of
electric shock.
WARNING
The device is NOT to be used for commercial use or medical purposes. If
you have health concerns, consult your doctor before using the Shiatsu
Neck and Back massager.
DO NOT use the device in damp rooms (e.g., when
bathing or showing)
DO NOT Wash!
DO NOT dry clean!
ONLY use indoors!
After using this device for 20 minutes, allow it to cool
for 30 minutes before using it again
16)
17)
18)
19)
3

The symbol of an exclamation point within a triangle is
intended to draw the user’s attention to important operating
and maintenance/servicing instructions in the literature
accompanying the unit.
PRODUCT FEATURES
OPERATION INSTRUCTION
1.Control Panel
2.Shiatsu Nodes
3.Adjustable Handles
4.DC Power Port
5.Wall Adapter
6.Car Adapter
2
1
3
4
5
6
POWER ON/OFF
MASSAGE DIRECTION
HEAT ON/OF
SPEED CHANGE
IMPORTANT: To reduce the risk of electric shock, this product has a
polarized plug (one prong is wider than the other). For safety reasons,
this plug will only fit into a polarized outlet the correct way. If the plug
does not fit fully into the outlet, reverse the plug. If it still does not work,
contact a qualified electrician to install a proper outlet. DO NOT bypass
this safety feature in any way.
4

OPERATION INSTRUCTION
Connect the Power Adapter into the DC Power Port, then plug the
Power Adapter into an electric outlet.
Grip the Positioning Handles and drape the unit around your neck
with the Shiatsu Nodes at the center of your back.
Press the" "POWER ON/OFF Button. The massager will turn on.
Press " " the MASSAGE DIRECTION Button to change the
massage direction.
Press " " the speed adjustment button to choose among 3
massage speed levels (low / medium / high).
Press " " the HEAT Button to activate heat; press it again to
deactivate heat.
Use the Positioning Handles to reposition the Shiatsu Nodes to
other areas of the neck and back.
Press " " the POWER ON/OFF Button at any time to turn the unit
off.
The unit shuts off automatically after 15 minutes of continuous use.
1.
2.
3.
4.
5.
6.
7.
8.
9.
MASSAGE AREAS
Shoulder
Black Waist
Neck
5

SPECIFICATIONS
Do not wash
Do not bleach
Do not dry (used with do not wash)
Do not iron
PRODUCT CARE AND MAINTENANCE
Place the massager in a safe, cool, and dry place when not in use.
After unplugging, wipe with a soft, damp cloth using non-abrasive
cleaners.
Never submerge the unit in any liquid.
Keep away from all solvents and harsh detergents.
Model: M00042AE12-US/ M00042AE19-US
Input: 12V = 2.5A
Rated Power: 30W
Package Content: Massager, Wall Adapter, Car Adapter, User Manual
DO NOT attempt to repair this massager. There are no
user-serviceable parts.
1.
2.
3.
4.
6

TROUBLESHOOTING GUIDE
PROBLEM CAUSE SOLUTION
The massager
doesn't turn on
Shuts off
automatically
The power adapter
plug is loose
The 15-minute timer
Reconnect the plug to the
outlet
Power is off
No power Try a different power outlet
The massager has a timer
and will turn off on its own
after 15 minutes. You can
press the power button to
start another 15-minute
massage.
The massager's
overheat protection
feature will switch off
the massager
automatically when it’s
too hot.
Please wait for the
massager to cool down
before powering it back
on.
Press the power button to
turn on the massager
7

Every Bob and Brad product is backed by a 1-year warranty and an
award-winning customer service team. If you are in any way dissatisfied
with a product you ordered, we’ll exchange it, replace it or refund your
money under the warranty. Simply email us the problem, and we’ll take
care of it.
A Dedicated Team Just For You
Answer questions about
your device and best
practices.
Product Knowledge
Place New Orders
Help you solve any
issues with your device.
Troubleshoot
Initiate Returns
Provide instructions for
replacements, returns
and refunds.
Help with placing
orders online and/or
authorized resellers.
Call: [phone] Mon-Fri 9:00AM-4:30PM (CST)
Email: [email protected]
FLIGE Products LLC
3001 Esperanza Crossing Austin,TX 78758
Get in Touch.
8

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
9

Manufacturer
Shenzhen Laige Technology Co. Ltd.
C2-608, 6th Floor, Building C2, Bantian International Center,
Longgang District, Shenzhen, Guangdong Provice, 518116, China
US Importer
FLIGE Products LLC
3001 Esperanza Crossing Austin, TX 78758