Medifab Houdini 31 User manual

SIZE “A” - SMALL
#4604-3101-017
SIZE “B” - LARGE
#4604-3102-017
ANTI-ESCAPE BUCKLE
CUSTOM: ______________________________
Serial Number:
Instruction Video
User Manual for all Houdini 31 Harnesses
Manual: Houdini31201504
IMPORTANT CONSUMER INFORMATION NOTICE:
This manual contains important instructions that
must be passed on to the user of this product.
Please do not remove this manual before delivery
to the end user.
SUPPLIER:
This manual must be given to the user of this product.
USER:
Before using this product, read entire manual and save
for future reference.
Houdini Harness
Model 31
Installation and
User Manual

MODEL 31
Vehicle harness designed to restrain & support children and adult passengers
with learning difficulties or challenging behaviour.
This harness is fitted with the steel safety buckle to the chest & waist straps as standard.
Fits most types of vehicle seating including single & double seats.
To fit the harness access is required between the seat back and seat cushion.
It is not a safety harness & should be worn in conjunction with the vehicle safety belt.
3. Bring the two horizontal straps around the child's chest
& waist. These must be threaded through the vertical
webbing loops on either side of the chest pad.
Loop the understrap over the waistbelt buckle.
Adjust all straps to fit tightly & securely.
Model 31 is available in two sizes.
3 yrs to 11 yrs 31A
12 yrs to Adult 31B
2. Lift the shoulder straps & PVC chest pad over the passengers
head & position it on their chest.
Adjust the shoulder straps to fit tightly & securely
1. Thread the two vertical fixing straps
through the access between the seat back
& seat cushion & fasten securely behind
the seat back.
Pass the loose ends through the plastic
Sliplock slides.
Also available with
Horizontal Fixing Straps for
single seats without access
between the seat back and
seat cushion.
Cat Ref: 32
(Non stock item)
Crelling Harnesses For Disabled Ltd.
12 Crescent East, Thornton-Cleveleys, Lancashire, FY5 3LJ
Tel: [phone] Fax: [phone] Email: [e-mail] Website: www.crelling.com

STEEL SAFETY BUCKLE

This buckle has proven extremely successful when fitted to our harnesses
as an alternative to the standard ‘quick release’ buckle.
It helps prevent those passengers with inquisitive fingers, challenging behaviour
or learning difficulties from releasing the harness buckle.
The buckle operates in reverse to the standard vehicle buckles as it is opened by
raising a spring loaded lever or over-catch and will not press release.
The spring loaded over-catch locks the buckle when assembled and prevents accidental opening.
There is a knurled sliding bar for adjustment designed to prevent webbing slip.
The buckle is made from Type 316 Stainless Steel and Nylon 6 and is assembled with tamper proof screws.
40/45mm buckle - B/Strain 630 kgs.
50mm buckle - B/Strain 500 kgs
We recommend that the buckle instructions provided with each harness are displayed in a prominent
position in the vehicle - to instruct the user how to release the buckle mechanism in the event of an accident.
40mm Buckle 50mm Buckle
Emergency Seat Belt Cutter
We strongly recommend that a seat belt cutter
is kept in the vehicle as a safety precaution.
It is perfectly safe as the blade is encased.
Cat. Ref: SK