Toyota PVM User manual

PANORAMIC VIEW MONITOR (PVM)
OWNERS MANUAL
Please read this manual for proper operation and keep it for future reference.
COROLLA CROSS - MAR - 2021 - 001

Statements & Declarations
Safety Instructions
Getting Started
Product Overview
Product Features
Operating Panaromic View Monitor (PVM)
Panaromic View Monitor (PVM) Operation
Blind Spot
Cautions
Troubleshooting (If Available)
Simple Troubleshooting
COROLLA CROSS - MAR - 2021 - 001
1.0
1.1
1
TABLE OF CONTENTS
PANORAMIC VIEW MONITOR (PVM)
Section
Title
Page
3 - 7
3.0
2.0
2.1
2
2.2
2
3.1
8
4.0
4.1
5.0
5.1
9
Please read this manual for proper operation and keep it for future reference.

Safety Instructions
Driving Precautions
The panoramic view monitor plays a subsidiary device in order to help driver
checking surroundings around the vehicle. Please be sure that before driving, the
visual check vehicle surroundings with mirrors before ready to go is necessary.
Please pay attention to the following notices and instructions when using the
panoramic view monitor.
Cautions
Drivers shall not depend on the panoramic view monitor only. There have some
different tolerance from the image and the actual object.

Be sure to check vehicle surroundings visually before driving.
When use panoramic view monitor, not only focus on monitor, but please also
use vehicle mirrors to check actual conditions.
The position of guide line displayed on the monitor may differ from actual
condition. Please check surround actual condition.
When the tire size changed, the guide line position displayed on the screen will
also be different.
Notice
Do not use high-pressurized water column to wash panoramic view monitor to
avoid damage.
The distances between the vehicle and objects may differ from the actual
distance.
There are blind spots around the vehicle so will not be displayed in panoramic
view monitor.
The light condition around each camera is different, so light displayed on the
image may differ.

The images from four cameras are combined. The border of the four image
clarity may decline which is normal.
The car display image may differ from actual car, purpose is to simulate car's
surrounding.
1.1
Please read this manual for proper operation and keep it for future reference.
1 / 9
SECTION 1.0
Statements & Declarations
COROLLA CROSS - MAR - 2021 - 001

Product Overview
Panoramic View Monitor (PVM) System has 4 cameras installed at front / rear
and left / right side mirror of the car, where its 360-degree bird’ s eye view is
displayed on the Display Audio for guidance of blind spot areas against the car.
Information
The screen illustrations used in this manual are examples, and may different from
the image of actual car displayed on unit.
Product Features
Assist blind spot area visibility by seamless image with front, back or left and
right view.
PVM guide line design, seizing distance between periphery obstacles and
vehicle itself.
Front/rear guideline refers to car width which design to assist low speed
reversing or driving.
Due to safety concerns, there will be a black mask area on top of the front
view.
When speed is over 20 ± 5 km/h, the PVM will deactivate and enter in AVX
mode.
Motion object detection mode activated when speed is around 0 km/h.
Turn signal mode activated when user turn on LH/RH signal below 20 ± 5 km/h.
SECTION 2.0
Getting Started
COROLLA CROSS - MAR - 2021 - 001
2.1
Please read this manual for proper operation and keep it for future reference.
2 / 9
2.2

Panoramic View Monitor (PVM) Operation
Press Apps icon to enter Apps mode, and press PVM icon to enter
PVM mode
Step 1: Step 2:
360° Rotation Shortly
When press PVM icon to enter PVM mode, car model will display 360° rotation
shortly and it is able to skip 360° preview by oneclick.
Gear: Reverse Mode ( R )
When Reverse Gear is engaged, the Display Audio will display panoramic image
specified for reversing mode in 2-3 seconds automatically (please refer to the
image below).
SECTION 3.0
Operating Panoramic View Monitor (PVM)
3.1
COROLLA CROSS - MAR - 2021 - 001
Please read this manual for proper operation and keep it for future reference.
3 / 9


The image show surrounding bird view
and rear view to assist driver.
Please be aware the distance with
periphery obstacle.
The panoramic image is a simulated
aerial view. When the obstacle is close
to the car, please stop the car and
confirm actual secure distance before
In Reverse mode, you may press the view switch to choose rear view or
360˚ view + rear view or 360˚ view + rear top view .
COROLLA CROSS - MAR - 2021 - 001
SECTION 3.0
Operating Panoramic View Monitor (PVM)
Please read this manual for proper operation and keep it for future reference.
4 / 9

Gear: Parking / Neutral / Drive Mode ( P/N/D )
The car will keep displaying the PVM-ahead image mode if the shift lever at
P/N/D and the speed under 20 ± 5 km/h.

Due to safety concerns, the front view will
not show the whole image. There will be a
black mask area on top of the front view.
The front guide line has blue lines. Please
pay more attention to the distance with
periphery obstacles when you drive. The
front guide line 1 is about 3 ft. (1m) from
the edge of the bumper.
When you reverse, please use left/right
side mirror to check surrounding area.
Press icons to switch to different view.
COROLLA CROSS - MAR - 2021 - 001
SECTION 3.0
Operating Panoramic View Monitor (PVM)
Please read this manual for proper operation and keep it for future reference.
5 / 9

Turn Signal Mode
When the driver turn the left or right signal on and the speed is under 20 ± 5 km/h,
The side view will be triggered.
Please read this manual for proper operation and keep it for future reference.
6 / 9
COROLLA CROSS - MAR - 2021 - 001
SECTION 3.0
Operating Panoramic View Monitor (PVM)

MOD Mode
The PVM detects moving object and shows the direction of object coming from
with yellow alarm.

Please be noted that the MOD is available only when the speed is around 0
km/h. User can press MOD icon to
activate and close MOD function
Car model color change
In P/N/D/R mode, press “color change icon” can switch color of car model.
COROLLA CROSS - MAR - 2021 - 001
SECTION 3.0
Operating Panoramic View Monitor (PVM)
Please read this manual for proper operation and keep it for future reference.
7 / 9

Cautions
The aerial panoramic image comes from the use of optical principle, where
intersection parts of four cameras are for image clipping process to build
panoramic effect, hence, four connection parts of images listed below would
cause image to temporarily disappear and drivers are requested to pay special
attention.
Objects may not be detected from some angles. The objects underneath the
bumper or on the ground may not be detected when they are displayed at front or
rear viewing angle (Grey parts in oblique lines).
The images from four cameras are in color difference under versified light
source due to light incoming angle discrepancies, which is normal.
The guide lines in the front left/right side of car mode are aligned due to
shooting position/angle difference from left/right rear mirrors; however, mild
staggered position of doors is normal.
PVM display area is constricted, where the further part from the car body will
present image deformation, which is normal.
PVM camera are precision device. Do not hit camera, which might cause
abnormal situations like failure or damage.
PVM is to aid and reinforce display of periphery blind areas against the car
body. When you drive, you still must make use of the left/right side mirrors and
rear view mirrors.
When you reverse, some conditions (Ex.: weather, light) might constrict
image. Do not drive your car only by the display.
PVM image might be affected or incorrect with the change of tire size; hence,
we do not suggest you to change tire size.
Heavy impact or displacement from collision might cause PVM image to
diverge right or left, worsening image connection. To resume normal
operations, image calibration and part replacement may be required.
4.1
SECTION 4.0
Blind Spot
COROLLA CROSS - MAR - 2021 - 001
Please read this manual for proper operation and keep it for future reference.
8 / 9

Simple Troubleshooting

Troubleshooting will help you to simply identify the most likely cause and
restore the process to working status. Whenever you have a problem with the
PVM, here are some basic troubleshooting techniques that can help you to fix
issues.
Please identify the following symptoms and most likely cause to find the
solutions. If the symptom is not resolved by the following solutions, please
have the car to be checked by your nearest TOYOTA dealer.
COROLLA CROSS - MAR - 2021 - 001
Please read this manual for proper operation and keep it for future reference.
9 / 9
SECTION 5.0
Troubleshooting
5.1