
INSTRUCTIONS FOR USE
Intended use: The mx Mobility toilet Seat Raiser for those who
need assistance toileting, ts all standard toilets. Helps those
who are recovering from back ops, hip replacements or in other
situations it may be needed.
FEATURES:
Durable plastic toilet raiser
Strong and safe
Suitable for all toilets
Handles oer extra support
Easy to clean
WARNING!
READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO
ASSEMBLY AND USE. IF YOU DO NOT UNDERSTAND
THESE INSTRUCTIONS, CONTACT A HEALTH
PROFESSIONAL BEFORE ATTEMPTING TO USE.
Before using the toilet seat raiser, be sure your weight is within
the weight capacity of the unit. This toilet seat raiser will require
little or no assembly and can be performed without tools.
Designed for indoor use only.
Heavy or uneven weight distribution may cause stress to the
unit.
For maximum safety, make sure all safety features are explained
to you by a qualied therapist, physician, or a certied
salesperson. Check all plastic parts often for wear.
The toilet seat cover should be cleaned and disinfected regularly.
Keep it dry when not in use.
The toilet seat raiser is not suitable for continuous use as a seat.
Do not hold onto the seat as a support when getting on and o
the toilet seat raiser.
Under no circumstances should you stand on the raised toilet
seat.
Ensure that the side knobs are tight enough to hold the seat to
the toilet bowl.
ASSEMBLY:
Inspect all parts for shipping damages before use. If there
is shipping damage – DO NOT USE. Contact your dealer/
distributor immediately for further instructions. If there are
any problems with your product, DO NOT attempt to repair it
yourself. Contact your dealer/distributor that you purchased the
product from for any needed parts or repairs.
Mx Health assumes no responsibilities for any damage or injury
caused by improper installation, assembly, or use of this product.
1. Ensure you inspect the product for any visual damage before
use.
2. Carefully remove the existing toilet seat and lid from the toilet.
Seats are generally attached by a pair of bolts/nuts located
under the rear rim of the toilet.
3. To install the arms, you must depress the push pins on the
arms and insert them into the mounting tubes. Ensure they
are locked in place. To remove the arms, reverse this step.
4. Carefully place the seat onto the toilet bowl. Position the
raised toilet seat correctly on the rim of the toilet ensuring the
front lip is outside the bowl. (g. 1)
5. Ensure the front adjustment bracket clears the rim so that the
toilet seat ts securely.
6 To tighten, turn the hand wheel clockwise (g. 2). Do not over
tighten. You should not be able to move the Raised Toilet
Seat, once tted.
7. Check the stability before use.
8. To remove, simply unscrew the hand wheel and remove the
raised toilet seat by lifting.
MAINTANANCE:
The toilet seat raiser is designed for minimum maintenance.
To clean, wipe over with a soft cloth. Use general purpose
neutral detergent and warm water.
Do not use harsh abrasives.
Disinfect regularly and dry.
Do not use water temperature more than 80°C
TOILETSEAT
RAISER
mObILISIng pATIEnTS wITh cARE
MOMO
HEALTH
MX79309
g. 1
g. 2
MD
MX79309_IFU_Toilet Raiser.indd 1MX79309_IFU_Toilet Raiser.indd 1 2021/10/26 14:442021/10/26 14:44