Medpage MemRabel 2 User manual

The Active Daily Reminder Clock
CHOICE OF TIME DISPLAY FORMATS
CHOICE OF TIME SCREEN COLOUR
20 PROGRAMMABLE ALARMS
CREATE REMINDERS WITH PHOTOS, AUDIO OR VIDEO
PRE-INSTALLED READY-TO-USE REMINDER FILES
IN THE BOX This manual, 1 x MemRabel 2 Screen, 1 x A/C Power
adaptor, 1 x Remote Control, 1 x Stand Attachment.
First insert the stand attachment into the stand socket
and tighten. Next insert the A/C power supply jack plug
into the socket marked DC. Plug the power adaptor into
a convenient mains power socket. MemRabel 2 will
perform a start-up sequence and after a few seconds
will revert to the default time display screen. You can
change it later if you wish.
MemRabel 2 must be connected to a mains power supply at all times. In the event
of a power failure or accidental removal of the power adaptor from the mains, when
power is reconnected the correct time and alarm settings will be restored
automatically. During a power down, MemRabel 2 alarms are inactive.
Locate the remote control. Gently pull out
the plastic battery isolator tab to activate
the remote control. Note: The remote
control is solely for the purpose of setting
the time and alarm time reminders. When
all settings are complete please store the
remote control in a safe place to prevent
tampering or accidental switching off of
the MemRabel 2.
NO FUNCTION
MOUSE MODE
DO NOT USE MENU BUTTON
MENU NAVIGATION
BUTTONS
EXIT BUTTON
VOLUME UP
VOLUME DOWN
MemRabel 2 User Manual REV 07/17 MedPage Ltd 01536 264849

SETTING THE TIME AND DATE
Press the button on the remote control marked MENU. You will see 3 boxes
appear on the screen. Press the remote control down arrow Þbutton to highlight
SETTINGS at the bottom right of the screen. Press the ENTER button. You will
now see the main settings screen with alarms 1 – 20 in red text. Top
right you will see “Set the time and date”. Use the remote control right arrow Ü
button to move the cursor over to the “Set time and date” box. Press ENTER.
The next screen allows you to set the date and time. Use the remote control arrow
buttons (UP DOWN LEFT RIGHT) to move the highlight box over the entry you wish
to change. Example – Change Day. Either side of the Day is a highlight box. To
increase the day, highlight the + (plus) box then press the remote control ENTER
button to advance the date. To decrease the date, highlight the – (minus) button
then press enter to decrease the date. Repeat this process for Month, Year and
Time. NOTE: When setting the time, it will advance in 24 hour mode, so 2PM
becomes 14:00 etc. Actual clock time will be displayed in 12 Hour mode. When all
settings are complete highlight SAVE then press the remote control ENTER button.
The Display will return to Alarm Settings Screen.
Press EXIT button to return to time display screen.Now hold the on/off
button on the back for 2 seconds to restart the Memrabel and
store/save your new time.
CHOOSING TIME DISPLAY AND BACKGROUND COLOUR
Press remote control MENU button. Use remote control UP or DOWN buttons to
highlight CHANGE COLOUR or CHANGE DISPLAY. Press the remote control
ENTER button repeatedly to select your choice of time display type, then repeat
for colour display.
SETTING YOUR FIRST ALARM REMINDER
Press MENU button, then use down arrow to highlight SETTINGS at the bottom
right of the display. Press ENTER. Use the remote control arrow buttons to
highlight Alarm 1. Press enter on the remote control. You will now see the setting
screen for alarms 1 – 20. Highlight Alarm 1, press ENTER.
ALARM TIME
Use the remote control arrow buttons to highlight alarm time +/- boxes. Press
enter on remote to increase or decrease hour and minutes.
ALARM DATE
Use the remote control arrow buttons to set the first date you wish the alarm to play
from. If the alarm is for daily repeat you do not need to change Alarm date.
MemRabel 2 User Manual REV 07/17 MedPage Ltd 01536 264849

Alarm Type –Highlight this box using remote control buttons. Press ENTER
to scroll through: Alarm Off – Daily – Weekly – Monthly – Single. When you see
the option you want press the right arrow button to highlight Alarm Repeats.
Weekly Alarm - When you select a weekly alarm you need to set the Alarm
Date for the day of the week for alarm repeat. Example today is November 5th
2015 (Thursday) to select an alarm to play every Monday set the Date to 9
November 2015 (you only need to change the date). The alarm will repeat
every Monday.
Monthly Alarm – When you select a Monthly alarm you need to set the date
for the Monthly repeat.
Alarm Repeats – Pressing the remote control ENTER button with Alarm
Repeats highlighted, allows you to select 1, 2, 3, 4, (the number of times your
selected files will repeat at alarm time). Alternatively, you can ignore Alarm
Repeats and move down to Alarm Duration.
Alarm Duration –With Alarm Duration highlighted press ENTER on the
remote control button. As you repeatedly press ENTER you can scroll through:
Repeat Mode (plays the selected alarm files the number of times selected by
Alarm Repeats button), 5 min, 10 min, 15 min, 20 min, 25 min. When you have
the desired alarm playback time showing, press the remote control DOWN Þ
arrow button to move down to Image
NOTE: In videos you will find a listing of pre-prepared reminder video files
which, contain the more popular daily reminders covering: Appointments,
Diabetes, Drink, Food, Home, Medication, and Safety. Each message is
preceded by a pre-alarm tone, reminder notice followed by the actual reminder
message. Selecting a file from this list makes it quick and easy to set your daily
Reminders.
For information on how to transfer personalised images or videos on to
the MemRabel 2, please call the help line on 01536 264869.
Image – Highlight IMAGE then press the remote control ENTER button. The
next screen allows you to select pre-installed reminder files, or external media
from an SD card or USB flash drive. You will see file selection titles:
VIDEO AUDIO IMAGE CANCEL
MemRabel 2 User Manual REV 07/17 MedPage Ltd 01536 264849

(pre-installed reminders) Use the remote control arrow buttons to highlight the top file
selection title: IMAGE. Press enter on the remote control. A list of files will appear
arranged in category groups, Appointments, Diabetes, Drink, Food, Home, Medication,
and Safety. Scroll down the list using the down arrow button until you see the reminder
type required. Press enter on the remote control to select the file. The screen will return
to the previous menu where your file selection will be shown next to Image, Audio, or
Video, depending on the file type selected. Use the remote control down arrow button
to move to audio file selection.
AUDIO – (pre-installed reminders) Repeat the instruction for IMAGE above after
selecting AUDIO.
VIDEO -(pre-installed reminders) Repeat the instruction for IMAGE above after
selecting VIDEO.
NOTE: You cannot select AUDIO + IMAGE + VIDEO for a reminder. It can be
VIDEO only or AUDIO + IMAGE.
WHEN ALL ALARM SETTINGS ARE COMPLETE HIGHLIGHT SAVE AT THE
BOTTOM OF THE SCREEN THEN PRESS ENTER TO SAVE THE ALARM.
PRESS EXIT BUTTON TO RETURN TO ALARMS SCREEN
When you press save the display will go back to the alarm setting screen where your
set alarms will be highlighted in green. To check the settings for any set alarm,
highlight the alarm using the remote DOWN/UP arrows. As you highlight an alarm, the
settings, including selected files will be shown below the alarm buttons. Press the
remote control exit button to return to time display screen.
CLEARING ALL YOUR SET ALARMS
If you wish to clear all previously set alarms, go to the alarms screen. Use the remote
control arrow buttons to highlight CLEAR ALL ALARMS. Press enter. When you see
the message “This will clear all alarms ARE YOU SURE????” Highlight NO or YES
then press enter. If you do not want to clear all alarms press EXIT button.
CHANGING PREVIOUSLY SET ALARMS
To change the time or frequency of an alarm, highlight the alarm box then press
enter. Change the time and alarm type. To replace an alarm file you must use the
REMOVE button (it will appear next to selected files). Highlight it, press enter, then
click save at the bottom of the screen. You can now select new reminder files.
How to setup video available at www.memrabel.co.uk
Alternatively scan the QR code below for a direct link to the instructional video:
MemRabel 2 User Manual REV 07/17 MedPage Ltd 01536 264849