MEGACHIC M3-WmicroA User manual

MEGACHIC
Wireless Microphone
Lightning / Type-C receiver
User Manual
contact email： jiec[email protected]
MADE IN CHINA
Introduction
Thanks for choosing our product.
This product is a smart wireless microphone that provides
professional-grade recording output. Plug and play, no app
required. Multiple uses: It can be used in online live broadcast,
video Vlog shooting, program interview, recording, video teaching
and other occasions.
The wireless microphone consists of two parts, one is microphone
transmitter, the other one is Lightning / Type-C receiver. (See as
below picture)
(Microphone transmitter) (Lightning / Type-C receiver)

ID Diagram
①Microphone pickup hole
②Power touch key
③Microphone indicator
④Type-C charging port of microphone
⑤Monitor earphone port
⑥Charging port of receiver for phone
⑦Receiver indicator
⑧Rope hole
⑨Lightning / Type-C port to connect phone
⑩Microphone clip
⑪Signal hole,no indicator
Note: For the use of ⑥, there is no battery in Lighting / Type-C
receiver, and no need to charge during live. If the phone is in low
battery during live, it can be charged directly through ⑥ with a
lightning / Type-C cable.
Specification
Model Number: M3-WmicroA / M3-WmicroT
Working Frequency: 2.4GHz
Mic Charging Port: Type-C
Charging Input Standard: DC 5.0V
Mic Battery Capacity: 3.7V / 120mAh
Charging Time: 1-1.5H
Recording Time: 8H
Disconnect Wait Time: 300s
Sleep Standby Time: 120 days
Recording Frequency: 50-15KHz
Control Method: Touch
Packing List
1 x Microphone transmitter
1 x Lightning / Type-C receiver
1 x Type-C charing cable
1 x Monitor earphone
1 x User manual
1 x Carrying case

About UI How to Use
1. Connect the receiver to phone with lightning / Type-C port. The
indicator blue light flashes.
2. Long touch of microphone for 2 seconds, the indicator light
turns blue.
3. The indicator blue light of receiver keeps on, then open the
phone camera, live Apps or other Apps.
4. Click to toggle the state of the microphone. It will be mute
when the indicator blue light is off.
5. Double click to power on or off monitoring, for monitoring
the recording and background music.
6. Turn on the bluetooth of phone, search "K3" and connect. Plug
the earphone in the monitoring earphone hole of microphone. The
voice in Apps can be heard. When the battery of microphone is
below 10%, low battery alarm can be heard via earphone.
7. Long touch for 6 seconds to power off.
8. Plug off the receiver from phone, the receiver turns off.
9. The microphone will be charged when connected with Type-C
cable. The indicator red light turns off when it is fully charged.
10. When the phone is in low battery, it can be charged through
the receiver with Lightning / Type-C cable. It supports recording
while charging.

Special Note
1. The microphone is IPX5 waterproof, do not soak in the water.
2. The clip on the microphone can be used to clip and hang on the
collar without affecting the sound pickup of the device.
3. The red light flashing indicates low battery. Please charge it in
time.
4. The maximum distance of microphone pickup is 1.5 meters. For
better recording effect, place the microphone as close to the
mouth as possible when recording.
5. The maximum distance between microphone transmitter and
receiver is 20 meters. It is recommended within 15 meters.
6. Plug off the receiver when power off the transmitter.
Notice: Please contact us if you have any questions before leaving
any review/feedback. We are always glad to answer within 24
hours.
CONTACT
[email protected]
[phone]

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction