SONICPRESENCE SP15 PRO User manual
SP15 PRO
XLR Spatial Microphone | 48V Phantom Power
QUICK-START GUIDE
®
®
SONICPRESENCE®
US & INTERNATIONAL PATENT PENDING
Download this guide
and other resources at
sonicpresence.com
SP15 PRO
Phantom Power 48V DIN45596
3-pin XLR Male
+/- 0.5dB
20 to 35,000Hz
Spatial Stereo/HRTF
-35dB (18mV / Pascal)
130 dB
< 20dB
> 114dB
20g (0.7oz)
-18°C (0°F) to 57°C (135°F)
Model
Powering
Connector
Sensor Matching
Frequency Response
Polar Pattern
Sensitivity (Open Cicuit at 1kHz)
Maximum SPL (1kHz at 1% THD)
Self Noise (A-weighted Typical)
Dynamic Range (at 1kHz)
Weight Sensors
Operating Temperature
TECH SPECS
WARRANTY & SUPPORT
Visit sonicpresence.com/pages/warranty to activate
your 1 year warranty.
If you have any questions, please send an email to
info@sonicpresence.com.
Learn more at sonicpresence.com
2. Situate mic pickups
in front of ear canal
1. Hang L/R earhooks
on respective ears
3. Fasten cables under
chin using cable slider
HOW TO WEAR
1. Hang the hook marked “L” over your left ear and
the red hook marked “R” over your right ear.
2. Adjust the fit so the spheres rest comfortably in
front of ear canal and not inside your ear.
3. Use Cable Slider to fasten cables below your
chin.
HOW TO CONNECT
4. Plug the SP15 Pro XLR Male Connectors directly
into 48v Phantom Power ports on preferred device.
OR
5. Plug SP15 Pro XLR Male Connectors into XLR
Female to Male cables (sold separately), and then
plug into device. Use strain relief XLR Belt Clips (sold
separately) to prevent heavy cables from pulling
down on earhooks.
48v Phantom Power
Left Channel
(Black)
Right Channel
(Red)
L R
Table of contents
