Mellerware TITANIUM 23250 User manual

R
e
g
i
s
t
e
r
o
n
l
i
n
e
N
e
v
e
r
l
o
s
e
y
o
u
r
r
e
c
e
i
p
t
e
N
e
makes life easier
TITANIUM
steam
iron
23260_IM.indd 1 2013/08/26 10:06:47 AM

Fig.1Fig.2
A
B
DE
F
G
H
I
C
23260_IM.indd 2 2013/08/26 10:06:48 AM

Description of parts:
A Spray button
B Steam blast button
C Steam regulator control
D Auto-cleaning button
E Temperature regulator
F Pilot light
G Fill-up opening
H Spray nozzle
I Soleplate
Safety advice and warnings
Read these instructions carefully before switch-
ing on the appliance and keep them for future
reference. Failure to follow and observe these
instructions may result in an accident.
•Use or working environment:
•Keep children and bystanders away when us-
ing this appliance.
•The appliance should be used and kept over a
flat and stable surface.
Electric safety:
•Do not use the appliance if the cable or plug
is damaged.
•Ensure that the voltage indicated on the rating
label matches the mains voltage before plug-
ging in the appliance.
•Connect the appliance to an earthed wall
socket.
•The appliance’s plug must fit into the wall
socket properly.
•Do not alter the plug. Do not use plug adap-
tors.
•If any of the appliance casings breaks, im-
mediately disconnect the appliance from the
mains to prevent the possibility of an electric
shock.
•Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if
it has a leak.
•Never use the electric wire to lift up, carry or
unplug the appliance.
•Do not wrap the cable around the appliance.
•Do not allow the connection cable to come
into contact with the appliance’s hot surfaces.
•If using the appliance outdoors, use a suitable
cord extension.
•Do not touch the plug with wet hands.
Personal safety:
•Do not touch metal parts of the iron while it is
in use, as it may cause serious burns.
•The temperature of the accessible surfaces
may be high when the appliance is in use.
•Use and care:
•Fully unroll the appliance’s power cable be-
fore each use.
•Use the appliance handle/s, to move it.
•Do not turn the appliance over while it is in use
or connected to the mains.
•To keep the non-stick treatment in good condi-
tion, do not use metal or pointed utensils on it.
•Respect the MAX level indicator(Fig. 1)
•Disconnect the appliance from the mains
when not in use and before undertaking any
cleaning task.
•Unplug the appliance from the mains before
refilling the water tank.
•This appliance is for household use only, not
professional or industrial use.
•This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory or mental capabilities or lack of
experience and knowledge, unless they have
been given supervision or instruction concern-
ing the use of the appliance by a person re-
sponsible for their safety.
•Children should be supervised to ensure that
they do not play with the appliance.
•Cleaning and user maintenance shall not be
made by children unless they are supervised
•Keep the appliance and its cable out of reach
of children
•This appliance is not a toy.
•Children should be supervised to ensure that
they do not play with the appliance.
•This appliance should be stored out of reach
of children.
•Do not put the appliance away if it is still hot.
•Do not store or transport the appliance if it is
still hot.
•To ensure that the iron functions correctly,
keep the iron face smooth and do not hit it
against metallic objects(for example, the iron-
ing board, buttons, zips…)
•The use of distilled water is recommended, es-
pecially if the water in your area contains any
type of grit or is “hard” (contains calcium or
magnesium).
•The water fill-up opening must not be left open
while the iron is being used.
•Never leave the appliance unattended while in
use.
23260_IM.indd 3 2013/08/26 10:06:48 AM

•Never leave the appliance connected and un-
attended if is not in use. This saves energy
and prolongs the life of the appliance.
•Do not use the appliance on any part of the
body of a person or animal.
•Do not use the appliance to dry textiles of any
kind.
•CAUTION: Do not leave this appliance unat-
tended if it is switched on.
•Turning the thermostat control to the minimum
(MIN) setting does not mean that the iron is
switched off permanently.
Service:
•Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
•Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer’s liability null and void.
Instructions for use
Before use:
Remove the appliance’s protective film.
•Make sure that all the product’s packaging
has been removed.
•Some parts of the appliance have been lightly
greased.
•Consequently, the first time the appliance is
used a light smoke may be detected.
•Prepare the appliance according to the func-
tion you wish to use.
Filling with water:
•It is essential to have filled the deposit with wa-
ter to be able to work with steam.
•Open the lid of the filling mouth.
•Fill the deposit taking care to observe the MAX
level(Fig. 1)
•Close the lid of the filling mouth.
Use:
•Unroll the cable completely before plugging it
in.
•Connect the appliance to the mains.
•Turn the thermostat control to the desired tem-
perature position.
•Do not use temperatures higher than those in-
dicated on the garments to be treated.
Setting Type of textile
•Synthetics, Nylon, Acrylics,
Polyester, Rayon
•• Wool, Silk
••• Cotton, Linen
MAX Linen
•If garment has various kinds of fibres, select
the temperature for the fibre that requires the
lowest temperature.
•(For example, select the temperature for poly-
ester for an article made out of 60% polyester
and 40% cotton).
•Wait until the pilot light (F) has gone out which
will indicate that the appliance has reached an
adequate temperature.
•During use the pilot light (F) will automatically
flash on and off, thus indicating that the heat-
ing elements are operating in order to main-
tain the desired temperature.
Dry ironing:
•The appliance has a steam flow regulator
that permits dry ironing (without steam) when
placed in the 0 position.
Steam Ironing:
•It is possible to iron with steam whenever the
deposit is filled with water and the adequate
temperature is selected.
Steam flow control:
•The appliance has a (C) control knob that al-
lows to get the control of the steam flow.
Spray:
•The spray can be used in both steam and dry
ironing.
•Press the spray button ( A ) to use this opera-
tion.
•The spray button has to be pressed repeat-
edly to release the first spray.
Steam blast:
•This function proportions extra steam for elimi-
nating wrinkles.
•Press the steam blast button (B). Wait a few
seconds until vapour penetrates the fibres of
the garment before pushing the button again.
•For optimum steam quality, do not apply more
23260_IM.indd 4 2013/08/26 10:06:48 AM

than three successive blasts.
•The spray button has to be pressed repeat-
edly to release the first spray.
Vertical steaming
It is possible to iron hanging curtains, items of
clothing on a hanger, etc. To do so, follow the
instructions:
•Select the maximum temperature of the iron,
while turning the temperature regulator of the
iron in a clockwise direction.(Fig 2)
•Move the iron in a top to bottom direction while
pressing the steam control ( B ). Important: for
cotton and linen, its recommended to put the
iron base in contact with the material.
•For other more delicate fibres, it’s recom-
mended to keep the iron base a few centime-
tres away.
Once you have finished using the appliance:
•Select the minimum position (MIN) using the
thermostat control.
•Unplug the appliance to the mains.
•Remove the water from the water tank.
•Clean the appliance
Cleaning
•Disconnect the appliance from the mains and
let it cool before undertaking any cleaning
task.
•Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
•Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
•Do not submerge the appliance in water or
any other liquid, or place it under a running
tap.
Self-cleaning function:
•It is important to self-clean the appliance at
least once a month to remove calcium and
any other built-up minerals inside the iron.
•Fill the depository to its maximum level, as in-
dicated on “water fill” section.
•Place the iron in a vertical position, plug in to
the mains and select the maximum tempera-
ture.
•Leave the appliance to heat up until the pi-
lot light indicates that it has reached its con-
signed temperature.
•Unplug the appliance and place in the sink.
•Press the self-clean button, and keep it
pressed down.
•Let the water flow out through the steam vents
in the base, while lightly shaking the appli-
ance.
•Release the button after a minute or when the
tank becomes empty.
•Leave the iron in the vertical position until it
has cooled.
Anomalies and repair
•Take the appliance to an authorised technical
support service if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous.
•If the connection to the mains has been dam-
aged, it must be replaced and you should pro-
ceed as you would in the case of damage.
23260_IM.indd 5 2013/08/26 10:06:48 AM

23260_IM.indd 6 2013/08/26 10:06:48 AM