Membrane Solutions HD3 User manual

Table Air Purifier-HD3
The warranties set forth herein are the only warranties made by Membrane
Solutions in connection with the product. Membrane Solutions cannot and does
not make any implied or express warranties with respect to the product, and
disclaims all other warranties, including, but not limited to, any warranty of
merchantability or fitness for a particular purpose. Products sold by Membrane
Solutions are sold only to the specification specifically set forth by Membrane
Solutions in writing. Other than the limited product warranty set forth herein,
Membrane Solutions makes no other warranties, express or implied. Membrane
Solutions’s sole obligation under this warranty shall be repaired or replacement of
a non-conforming product or parts of the product, or at the option of Membrane
Solutions, return of the product and a refund of the purchase price. Buyer
assumes all risk whatsoever as to the result of the use of the product purchased,
whether used singularly or in combination with any other products or substances.
For more products and technical support, please contact us at:
www.membrane-solutions.com
Or find us in “Membrane Solutions” Amazon Store
1-866-528-4572
Trouble Cause of issue Possible Solution
Strange smell from
purifier air outlet.
No air flow from device. There is a foreign body
blocking the outlet or the
filter’s packing bag has not
been removed.
Clean the foreign body
or remove the filter’s
packing bag.
Too much dust and / or
contaminants in the filter. Change the filter.
Filter replacement schedule: Every 3-months
Please keep the owner’s manual for future reference.
It includes operation guide and purifier maintenance for
Membrane Solutions HD3 table air purifier.
®
Aroma Module
Air Outlet
Touch Panel
Air Inlet
Air Filter
Bottom Cover
3. Select Speed Level
5. Filter Reset
4. Negative Ions
Press power button repeatedly to
select the fan speed level “Low”,
“Medium” or “High” displayed by
the indicator panel.
When the “Filter Reset” indicator light
is on, please turn off the power and
replace the purifier filter element.
After the replacement is completed,
press and hold the “Filter Reset” button
for 3 seconds, the buzzer will sound
once and the indicator light will go out.
When the power is on, press “Negative
Ions” to refresh the air in room.
Press “Negative Ions” again to turn
off this feature.
Low
Medium
High
V. TROUBLE SHOOTING
IV. MAINTENANCE
Limited Warranty
Owner’s ManualOwner’s ManualOwner’s Manual
www.membrane-solutions.comwww.membrane-solutions.comwww.membrane-solutions.com

Thank you for choosing
Membrane Solutions
®
Table Air Purifier!
Designed to clean and refresh the air in your home.
Inspect the Package
Site Preparation
Components List
II. FILTER / AROMA INSTALLATION III. OPERATION INSTRUCTIONS
Start Up the Purifier
1. Power On 2. Power Off
In the power on state, press and hold the
power button for 3 seconds to enter the
standby mode.
Insert the plug. Press the power button
once. The purifier defaults to low fan
speed, and the corresponding function
indicator lights.
Display & Operation Panel
To remove the bottom cover.
Rotate counter-clockwise
remove the base.
The filter has been sealed in a packing
bag for shipping. remove the filter, take
off the plastic covering the filter and
reassemble the filter into the purifier
Remove the bag on the filter before use
I. BEFORE INSTALLATION
Filter Reset
Negative Ions
High Speed (Smoke purifying)
Medium Speed
Low Speed
Power
To assemble the bottom cover.
Rotate in a clockwise-direction
until you hear a ‘click’ the base
is now locked in place.
To add or replace essential oil, take out the
aroma module. Drip essential oil onto the
aroma cartridge block. The fragrance will
dispense when the air passes the block.
3 × Aroma Cartridges
Warning：
This device is designed to operate on 110-130V (North America).
Do not use on higher voltages, you may damage the product or
cause personal injury to yourself or others.
1 × Air Filter
(supplied In the device)
1 × Air Purifier Device
www.membrane-solutions.comwww.membrane-solutions.comwww.membrane-solutions.com
stay simple, stay pure
Owner’s ManualOwner’s ManualOwner’s Manual
Do not place the table air purifier near equipment using flammable gas
as leaking gas could reach the table purifier causing a fire.
Do not use in a flammable, explosive or corrosive atmosphere.
The purifier has electronic controls on the base of the unit, please avoid
any liquid reaching this area.