Philips AMF220/35 User manual

AMF220
EN User manual 1 ZH-T 使用手冊 12
This product is only suitable for well insulated spaces or occasional use.
此產品僅適用於絕緣良好的空間或僅供偶爾使用。

1EN
English
Contents
1 Your 3-in-1: air purier, fan and heater ������������������������������������2
Product overview .......................................................................................................2
Display overview ........................................................................................................ 3
Controls overview ......................................................................................................4
2 Getting started ������������������������������������������������������������������������������5
Installing the lter ......................................................................................................5
Setting up the remote control ...............................................................................5
3 Using the 3-in-1: air purier, fan and heater ���������������������������5
Air quality light ............................................................................................................5
Turning on and o ......................................................................................................6
Heater and fan ............................................................................................................6
Oscillation .....................................................................................................................6
Setting the timer .........................................................................................................6
Setting the child lock ................................................................................................6
Sleep, turning light on/o ....................................................................................... 7
Pairing your remote control .................................................................................... 7
Replacing the battery ............................................................................................... 7
4 Cleaning and maintenance ��������������������������������������������������������8
Cleaning the body of the appliance ....................................................................8
Cleaning the lter surface .......................................................................................8
Filter replacement ......................................................................................................8
5 Troubleshooting ���������������������������������������������������������������������������9

2EN
1 Your 3-in-1: air purifier, fan and heater
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register your product at
www.philips.com/welcome.
Product overview
AB
C
D
F
E
G
H
I
J
ARemote control FDisplay screen
BHousing GPhilips lter (FYM220/30)
CControl buttons HBack cover
DLight strip IStorage slot for remote control
EAir outlet JAir quality sensor

3EN
English
Display overview
K
L
M
N
O
KTemperature display NAir quality indicator
LChild lock indicator OFilter replacement alert
MPM2.5 display

4EN
Controls overview
Short press Timer Oscillation Fan setting Heater setting On/o
Press for
3 seconds
Sleep
Light on/o
Reset lter
lifetime Child lock

5EN
English
2 Getting started
Installing the lter
Note: Make sure the appliance is unplugged from the electrical outlet before installing the lter.
1 2 3 4 5
1 To remove the back cover, hold the side of it with both hands and pull.
2 Pull the lter from the appliance.
3 Remove all packaging materials from the lter.
4 Put the lter back into the appliance.
5 Reattach the back cover.
Setting up the remote control
1 Pull out the plastic lm on the remote control to
activate the battery.
2 Pair the remote control with the appliance if
you have multiple devices in one house (see the
chapter “Pairing your remote control”).
Note: Place the remote control in the slot and it snaps in place
automatically.
3 Using the 3-in-1: air purifier, fan and heater
Air quality light
PM2�5 level Air quality light color Air quality level
≤12 Blue Good
13-35 Blue-purple Fair
36-55 Purple-red Poor
> 55 Red Very poor

6EN
Turning on and o
Note:
• Plug the appliance into the power outlet; do not use a power strip.
• If the appliance is running in heating mode when you turn it o, it continues working for
a few seconds to exhaust the remaining heat.
1 Press to switch on the appliance.
2 The display panel lights up, and appliance shows the PM2.5 level
and temperature.
3 Press to switch o the appliance.
Heater and fan
Light strip
Heater ( ) Low Medium High Red
Fan ( ) Low Medium High Blue
Oscillation
Press the button, the appliance can oscillate at three angles: 60°, 120° and 350°.
Setting the timer
Press the button repeatedly to set operating hours of the appliance. The timer is available
from 1to 7hours.
1 hour 2 hours 3 hours 4 hours 5 hours 6 hours 7 hours
To deactivate the timer, press the button repeatedly until all the hour indicators are o.
Setting the child lock
1 Press and hold the button for 3 seconds to activate the child
lock.
»appears on the screen.
»All the other buttons are unresponsive except on/o.
2 Press and hold the button for 3 seconds to deactivate child
lock.
»disappears.
3s

7EN
English
Sleep, turning light on/o
1 Press and hold the button for 3 seconds.
»The display screen dims, rest lights will turn o.
2 Press any button to turn all lights on.
Pairing your remote control
X 2
1
5s
2
1 Unplug the appliance from the power outlet and wait for 10 seconds. Plug in the
appliance, then within 5 seconds,press the button on the appliance twice.
»The 2h indicator lights up.
2 Long press the button for 5 seconds on the remote control within 5 seconds.
»The and indicator of fan button on the appliance lights up, and the appliance
operates in the fan mode, indicating that the pairing is successful.
Note: If the “2h” indicator is blinking, you must repeat the pairing.
Replacing the battery
1
1
2
2 3
1 Push the battery bracket edge gently and pull it out of the remote control.
2 Insert the new battery with correct polarities as indicated.
3 Put the battery bracket back into the remote control.
3s

8EN
4 Cleaning and maintenance
Note: Switch o the appliance and unplug it from the power outlet before continuing.
Cleaning the body of the appliance
Use a soft, dry cloth to clean the appliance surface, including air inlet and
outlet.
Clean particle sensor surface. Do not open particle sensor cover.
Cleaning the lter surface
Clean the lter surface with a vacuum cleaner or brush every two weeks.
1 4 532
1 Pull the back cover and remove it from the appliance.
2 Pull the lter from the appliance.
3 Clean the surface of the lter with a vacuum cleaner.
4 Put the lter back into the appliance.
5 Reattach the back cover.
6 Wash your hands thoroughly after cleaning the lter.
Filter replacement
When the lter replacement alert lights up
Note:
• The lter is not washable or reusable.
• Do not smell the lter because it contains air pollutants.
Replace the lter when lights up on the screen.
1 Replace the lter with Philips lter (FYM220/30). Follow the
instructions in the chapter “Installing the lter”.
2 Press to switch on the appliance.
6

9EN
English
3 Press and hold the button for
3 seconds to reset the lter replacement
time.
»The lter replacement alert
disappears from the screen.
4 Wash your hands thoroughly after
replacing the lter.
3
3s
4
Before the lter replacement alert lights up
You can replace the lter before the lter replacement alert ( ) lights up. If you do this, you
need to reset the lter lifetime counter manually.
1 Unplug the appliance from the power outlet and wait 10 seconds.
2 Plug the appliance into the power outlet.
3 Within 15 seconds after power on, press and hold the button for
3 seconds to reset the lter lifetime counter.
»The lter replacement alert blinks once after successfully
resetting the lter.
5 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact the
Consumer Care Center in your country.
Problem Possible solution
The airow from
the air outlet is
signicantly weaker
than before.
• The surface of the lter is dirty. Clean the surface of the lter (see
the chapter “Cleaning and maintenance”).

10 EN
Problem Possible solution
The air quality does
not improve even
though the appliance
has been operating
for a long time.
• Check whether the packing material is removed from the lter.
• Check whether the lter is installed in the appliance.
• Clean the sensor cover surface with mop or vacuum cleanser;
Do not open sensor cover or touch inside.
• Room size is too large, or the outdoor air quality is poor.
For optimum purication performance, close the doors and
windows when operating the appliance.
• There are indoor pollution sources. Examples include cigarette
smoke, cooking fumes, incense, perfume and alcohol.
• Filter has reached end of life. Replace the lter with a new one.
The appliance
produces a strange
smell.
• The rst few times you use the appliance, it may produce a plastic
smell. This is normal.
• If the appliance produces a burning smell, immediately unplug
it and turn it upside down to check whether any foreign objects
have fallen into the appliance. If nothing is found, please contact
your Philips dealer or an authorized Philips service center.
• The lter may produce an odor after being used for a while
because of the absorption of indoor gases. It’s recommended that
you reactivate the lter by putting it in direct sunlight for repeated
use. If the odor remains, replace the lter.
The appliance is too
loud.
• The noise level is higher if you select high speed.
• If anything drops into air outlet, it may also cause abnormal loud
sound. Immediate turn o the appliance and turn it upside down
to remove foreign objects.
• If there is an abnormal sound, contact the Consumer Care Center
in your country.
The appliance still
indicates that I need
to replace a lter, but
I already did.
• Perhaps you did not reset the lter lifetime counter. Switch on the
appliance. Then press and hold the button for 3 seconds.
The heating function
is not working.
• Check whether the air inlet or air outlet is blocked.
• Check whether the lter surface is excessively dirty and
blocking airow. If so, the heating function may stop working for
protection.

11EN
English
Model identier(s): AMF220
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local
space heaters only (select one)
Nominal heat output Pnom 2,1 kW manual heat charge control, with integrated
thermostat
[no]
Minimum heat output
(indicative)
Pmin 1,2 kW manual heat charge control with room and/
or outdoor temperature feedback
[no]
Maximum continuous
heat output
Pmax, C 1,8 kW electronic heat charge control with room
and/or outdoor temperature feedback
[yes]
Auxiliary electricity
consumption
fan assisted heat output [no]
At nominal heat output elmax N/A kW Type of heat output/room temperature control
(select one)
At minimum heat
output
elmin N/A kW single stage heat output and no room
temperature control
[no]
In standby mode elSB 0 kW Two or more manualstages, no room
temperature control
[no]
with mechanic thermostat room
temperature control
[no]
with electronic room temperature control [yes]
electronic room temperature control plus
day timer
[no]
electronic room temperature control plus
week timer
[no]
Other control options (multiple selections possible)
room temperature control, with
presence detection
[no]
room temperature control, with open
window detection
[no]
with distance control option [no]
with adaptive start control [no]
with working time limitation [yes]
with black bulb sensor [no]
Contact details Philips Consumer Lifestyle B.V.
Building TC, Tussendiepen 4, 9206 AD Drachten, The Netherlands
Information requirements for electric local space heaters

12 ZH-T
目錄
1 您的 3 合1 風扇、暖風空氣清新機 ......................................13
產品概要 .........................................................................................................13
顯示概覽 ........................................................................................................ 14
控制鍵概覽 ................................................................................................... 15
2 使用入門 ..................................................................................... 16
安裝濾網 ........................................................................................................ 16
設定遙控器 ................................................................................................... 16
3 使用 3 合1 風扇、暖風空氣清新機 ..................................... 16
空氣質素燈 ................................................................................................... 16
開關 ..................................................................................................................17
暖風及風扇 ....................................................................................................17
擺動 ..................................................................................................................17
設定定時功能 ................................................................................................17
設定兒童安全鎖 ...........................................................................................17
睡眠、開燈/關燈 ........................................................................................ 18
配對您的遙控器 .......................................................................................... 18
更換電池 ........................................................................................................ 18
4 清潔及保養 ................................................................................. 19
清潔本產品機身 .......................................................................................... 19
清潔濾網表面 ............................................................................................... 19
濾網更換 ....................................................................................................... 20
5 疑難排解 ......................................................................................21

13ZH-T
繁體中文
1 您的 3 合1 風扇、暖風空氣清新機
感謝您購買 Philips 產品，同時歡迎您來到 Philips 世界！
請前往以下網址註冊您的產品，以獲得 Philips 的完整支援：
www.philips.com/welcome。
產品概要
AB
C
D
F
E
G
H
I
J
A遙控器 F顯示屏幕
B外殼 GPhilips 濾網 (FYM220/30)
C控制按鈕 H後蓋
D燈帶 I遙控器收藏槽
E排氣口 J空氣質素感應器

14 ZH-T
顯示概覽
K
L
M
N
O
K氣温顯示 N空氣質素顯示
L兒童安全鎖指示燈 O濾網更換 警示
MPM2.5 顯示

15ZH-T
繁體中文
控制鍵概覽
短按 定時器 擺動 風扇設定 暖風設定 開啟/關閉
長按 3 秒睡眠
開燈/關燈 重設濾網壽命 兒童安全鎖

16 ZH-T
2 使用入門
安裝濾網
備註：安裝濾網前，請確保將產品的插頭從電源插座拔出。
1 2 3 4 5
1 請用雙手抓緊產品的兩側，然後拉出以拆卸後蓋。
2 從產品拉出濾網。
3 從濾網移除所有包裝物料。
4 將濾網裝回本產品。
5 重新裝上後蓋。
設定遙控器
1 將遙控器的膠片拉出，以啟用電池。
2 如果您在同一個房子內擁有多個裝置，則請
將遙控器與產品進行配對（請參閱「配對您
的遙控器」章節）。
備註：將遙控器放入收藏槽中，它會自動地卡合穩固。
3 使用 3 合1 風扇、暖風空氣清新機
空氣質素燈
PM2.5 水平 空氣質素指示燈的顏色 空氣質素水平
≤12 藍色 良好
13-35 藍紫色 一般
36-55 紫紅色 差
> 55 紅色 非常差

17ZH-T
繁體中文
開關
備註：
• 將產品插頭插入電源插座；切勿使用拖板。
• 如關閉產品時正在使用暖風模式，產品將繼續工作數秒，以將剩餘的暖風
排出。
1 按以開啟本產品。
2 顯示面板會亮起，然後產品會顯示 PM2.5 水平及温度。
3 按下 按鈕以關閉產品。
暖風及風扇
燈帶
暖風 ( ) 低 中 高 紅色
風扇 ( ) 低 中 高 藍色
擺動
按下 按鈕，產品可以 60°、120°及350°三個角度擺動。
設定定時功能
重複按下 按鈕以設定產品的運作時數。 定時功能可選擇 1至7小時。
1 小時 2 小時 3 小時 4 小時 5 小時 6 小時 7 小時
要停用定時功能，請重複按下 按鈕，直至關閉所有時數顯示。
設定兒童安全鎖
1 按住 按鈕 3 秒即可啟用兒童安全鎖。
»會出現在螢幕上。
»除開/關以外，其他所有按鈕均不會作出回應。
2 按住 按鈕 3 秒即可停用兒童安全鎖。
»消失。
3s

18 ZH-T
睡眠、開燈/關燈
1 按住 按鈕 3 秒。
»顯示螢幕會變暗，其他燈光將會關閉。
2 按動任何按鈕以亮起所有燈光。
配對您的遙控器
X 2
1
5s
2
1 將產品插頭從電源插座拔出，並等待 10 秒。將產品插頭插入電源，然後在 5 秒
內按下 按鈕兩次。
»2 小時指示燈會亮起。
2 在5 秒內，長按遙控器的 按鈕 5 秒。
»產品上風扇按鈕的 及指示燈會亮起，然後產品會以風扇模式運作，
表示配對成功。
備註： 如果「2h」指示燈在閃爍，您必須重複進行配對。
更換電池
1
1
2
2 3
1 輕推電池支架的邊緣，然後將其從遙控器中拉出。
2 如圖所示，依照正確的極性插入新電池。
3 將電池支架放回遙控器。
3s