Memorex MX5520SPKA User manual

MODEL: MX5520SPKA
R
MINI SYSTEM DIGITAL AM/FM 5 CD CHANGER
DUAL CASSETTE RECORDER
WITH TURNTABLE AND REMOTE CONTROL
BEFORE OPERATING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS COMPLETELY

IMPORTANT SAFEGUARDS
CAUTION:
_Read all of these instructions.
_Save these instructions for later use.
_Follow all warnings and instructions marked on the audio equipment.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product
is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. WATER AND MOISTURE
The product should not be used near water, for e ample, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6. CARTS AND STANDS
The product should be used only with a cart or stand that is recommended
by the manufacturer.
6A. An applian e and art ombination should be moved
with are. Qui k stops, ex essive for e, and uneven
surfa es may ause the applian e and art
ombination to overturn.
7. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling as recommended by the
manufacturer.
8. HEAT
The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products ( including amplifiers ) that produce
heat.
9. VENTILATION
The product should be situated so that its location or position does not
interfere with its proper ventilation. For e ample, the product should not be
situated on a bed, sofa, rug, or similar surface that may block the ventilation
openings; or, placed in a built-in installation, such as a bookcase or cabinet
that may impede the flow of air through the ventilation openings.
10. POWER SOURCES
The product should be connected to a power supply only of the type
described in the operating instructions or as marked on the product.
11. GROUNDING OR POLARIZATION
Precautions should be taken so that the grounding or polarization means of
a product is not defeated.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they e it from the product.
13. CLEANING
The product should be cleaned only as recommended by the manufacturer.
14. POWER LINES
An outdoor antenna should be located away from power lines.
15. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the receiver, be sure the antenna
system is grounded so as to provide some protection against voltage
surges an built up static charges. Section 810 of the National Electrical
Code. ANSI/NFPA 70 provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
16. NONUSE PERIODS
The power of the product should be unplugged from the outlet when left
unused for a long period of time.
17. OBJECT AND LIQUID ENTRY
Care should be taken so that objects do not fall and liquids are not spilled
into the enclosure through openings.
18. DAMAGE REQUIRING SERVICE
The product should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen or liquid has been spilled into the product; or
C. The product has been e posed to rain; or
D. The product does not appear to operate normally or e hibits a marked
change in performance; or
E. The product has been dropped, or the enclosure damaged.
19. SERVICING
The user should not attempt to service the product beyond that described
in the operating instructions. All other servicing should be referred to
qualified service personnel.
20. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer s attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as
practical.
WARNING:
To reduce the risk of fire or electric shock, do not expose it is
appliance to rain or moisture.
CAUTION:
Use of controls or adjustments or performance of procedures other
than those specified may result in hazardous radiation exposure.
CAUTION
To redu e the risk of ele tri sho k, do not remove over (or ba k).
No user servi eable parts inside. Refer servi ing to qualified servi e
personnel
The lightning flash with arrowhead symbol within an equilat-
eral symbol, with an equilateral triangle, is intended to alert
user to the presen e of uninsulated dangerous voltage
within the produ ts en losure that may be of suffi ient
magnitude to onstitute a risk of ele tri sho k to persons
The ex lamation point within an equilateral triangle is
intended to alert the user to the presen e of important
operating and maintenan e ( servi ing ) instru tion in the
literature a ompanying the applian e.
CAUTION
For Compact Disc Units only.
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO LASER BEAM.

1
TABLE OF CONTENTS
INSTALLATION...................................................................................................................................................2~5
Accessories...........................................................................................................................................................2
Positio i g Your Mai U it.....................................................................................................................................2
Rear Pa el Co ectio s........................................................................................................................................3
Co ecti g the Speakers.......................................................................................................................................4
Co ecti g Optio al Equipme t............................................................................................................................5
FUNCTIONAL OVERVIEW.....................................................................................................................................6~11
Fro t Pa el..................................................................................................................................................6 - 8
LCD Display...........................................................................................................................................................9
Remote Co trol...........................................................................................................................................10-11
AMPLIFIER............................................................................................................................................................12
Ge eral...............................................................................................................................................................12
TIMER SETTING .........................................................................................................................................12~13
Clock Setti g..........................................................................................................................................................12
Time O /Off Setti g......................................................................................................................................12-13
Sleep Timer....................................................................................................................................................13
TURNTABLE.....................................................................................................................................................14
Pho o............................................................................................................................................................14
CD CHANGER.................................................................................................................................................15~17
Loadi g Disc I to The CD Tray................................................................................................................................15
Disc Status..........................................................................................................................................................15
Normal CD Playback.......................................................................................................................................15
CD Ra dom Playback......................................................................................................................................16
CD Repeat Playback..........................................................................................................................................16
Displayi g Time I formatio ..........................................................................................................................16-17
CD Program ( CD Memory )..............................................................................................................................17
TAPE PLAYER..................................................................................................................................................18~19
Loadi g O e Tape............................................................................................................................................18
Normal Playback ( Deck A a d Deck B )............................................................................................................18
Recordi g ( Deck A )....................................................................................................................................18-19
Seque tial Playback ( Deck B to Deck A).............................................................................................................19
TUNER.............................................................................................................................................................20
Auto (automatic)/Ma ual Tu i g...........................................................................................................................20
Preset Memory................................................................................................................................................20
GENERAL INFORMATION...........................................................................................................................21~22
Troubleshooti g....................................................................................................................................................21
System Specificatio s.........................................................................................................................................22

2
ACCESSORIES POSITIONING YOUR MAIN UNIT
This package co tai s:
- 1 Mai U it
- 2 Fro t Speakers
- 2 Surrou d Speakers
- 1 FM A te a
- 1 Remote Co trol
- 2 AA Batteries
- 1 I structio book
Place the u it o stable, level surface, out of direct su light
a d away from sources of excessive dust, dirt, heat, water,
moisture, vibratio a d stro g mag etic fields.
Do ot co ect the u it to the AC power supply u til all
other co ectio s have bee made a d the AC voltage (i -
dicated o the type plate o the back cover) has bee
checked.
Whe positio i g the u it, bear i mi d that every receiver
produces heat which must be able to dissipate freely. For
this reaso do ot cover a y ve ts a d make sure that
there is sufficie t ve tilatio arou d the u it.
Always remove all CDs from the cha ger before movi g the
system.
INSTALLATION
MAIN UNIT
FM A te a
Fro t Left/Right Speakers
REMOTE CONTROL
++
++
_
_
MUTE
1
9
RANDOM
SKIP
TIMER
TUNING
SEARCH
VOLUME
DISC -SKIP
EQ
+10
INTRO
M-DOWN/
STOP
M- UP /
REPEAT
OPEN /
CLOSE
PLAY/
PAUSE
5
0
678
43
AU
TAP E
TUNER/BAND
CD
2
POWER
+
_
SLEEP
MEMO/
C.ADJ
MODE/
REMAIN
Surrou d Speakers

3
Plug the FM a te a to the FM termi al of the mai u it.
ANTENNA OR SPEAKER WIRE CONNECTION TO
TERMINALS
INSTALLATION
REAR PANEL CONNECTIONS
1.FM ANTENNA (FM 75 OHM)
For co ecti g the 75 ohm a te a supplied.
2. AUX IN (L/R)
For co ecti g optio al video equipme t.
3. SURROUND SPEAKER (8 OHM)
Co ect supplied left a d right fro t surrou d speaker
here.
4. FRONT SPEAKERS (4 OHM)
Co ect supplied left a d right fro t speakers here.
5. AC POWER CORD
Plug i to a sta dard 120V/60Hz household wall outlet.
CONNECTING THE FM ANTENNA
NOTE: Pushandholdspeaker terminal tab downtoinsert
wire. Release tab to lock wire in terminal. Make sure
the insulation is completely removed from the ends of
theantennaand speakerwiresat allconnectionpoints.
+
_
+
_
AUX IN
R
L
 !"
++
__
R
L+
_
+
_
++
__

4
INSTALLATION
CONNECTING THE SPEAKERS
Connect ng the Front Speakers
Co ect the right fro t speaker to the fro t speaker ″ R ″
termi al o the back of the mai u it, a d the left fro t
speaker to the fro t speaker ″ L ″ termi al.
Make sure the (+) a d (-) cables are co ected to the cor-
rect fro t speaker termi als [(+) to (+) a d (-) to (-)].
L
LL
L
+
-
+
-
+
-
+
-
41/06
41/06 LEFT
LEFT
R
L+
_
+
_
2
++
__
++
__
%
Connect ng the Surround Speakers
Co ect the right fro t speaker to the surrou d speaker ″ R
″ termi al o the back of the mai u it, a d the left fro t
speaker to the surrou d speaker ″ L ″ termi al.
Make sure the (+) a d (-) cables are co ected to the cor-
rect surrou d speaker termi als [(+) to (+) a d (-) to (-)].
CONNECTING THE SURROUND SPEAKERS

5
INSTALLATION
CONNECTING OPTIONAL EQUIPMENT
Connect ng a V deo system
Co ect the ″ L ″ a d ″ R ″ Audio output termi als of your
laser disc or VCR system to the ″ L ″ a d ″ R ″ AUX
INPUT termi als of the mai u it.
AUX
L
4
R
L
OUT
BACK VIEW OF YOUR LD OR VCR SYSTEM
+
_
+
_
+
_
+
_
R
L+
_
+
_
2

6
FUNCTIONAL OVERVIEW
FRONT PANEL FRONT PANEL
FLAT
POWER
) *
R
1
910
11 1 2 13 5 6 7 16 17
3
1
19
22
23
4
2
2
14
15
21
20
27
25 2624

7
FUNCTIONAL OVERVIEW
13. SENSOR
I frared rays se sor, to recieve the i formatio s
tra smitted from the remote co trol.
14. SLEEP
Press to select the SLEEP timer o or off. Keep press-
i g this key will set the sleep time from 00 to 90
mi utes.
15. TIMER
Press to set timer o or off. Whe timer is o , will
illumi ate.
16. OPEN / CLOSE
Press to ope or close the CD door
17. DISC SKIP
I CD memory set mode, press to set to ext valid
disc umber i asce di g order.
I CD ormal play or stop mode,press to skip to ext
valid disc i asce di g order.
Not i CD mode, press to skip to ext valid disc i
asce di g order whe the door is ope .
18. MODE / REMAIN
I TUNER mode, press to cha ge the followi g dis-
play cyclically: Ba d a d Freque cy, Time display.
I CD ormal play mode, press to cha ge the follow-
i g display cyclically: Each playi g time, Each re-
mai i g time, Total remai i g time, Total playi g time,
Time display.
 I CD ra doml play mode, press to cha ge the follow-
i g display cyclically: Each playi g time, Each re-
mai i g time, Time display.
I CD memory play mode, press to cha ge the fol-
lowi g display cyclically: Each playi g time, Each re-
mai i g time, Program umber, Time display.
 I CD stop mode, press to cha ge the followi g dis-
play cyclically: All time display, Time display.
 I TAPE or AUX mode, press to cha ge the followi g
display cyclically: AUX or TAPE, Time display.
NOTE: TheaboveTime display including: Clockdisplay,
Time ON, Time OFF.
19. MEMO / C-ADJ.
 I TUNER mode, press to store AM/FM statio s i the
memory locatio s.
I CD mode, press to do CD program i memory
locatio s.
I clock adjust mode, press to set clock or timer
adjustme t.
FRONT PANEL
1. POWER
Press the POWER butto to switch the mai power of
the u it ON or STANDBY.
2. ST. / NOR & MONO. / H.S.D.
I TAPE RECORD mode, press to select ormal mode
or to i crease the TAPE recordi g speed to twice the
ormal recordi g speed.
 I FM mode, press to select either STEREO sou d or
MONO sou d.
3. VOLUME
Press the volume butto s to adjust the volume level up
or dow .
4. PHONES
Plug headpho es i to this jack. Press the volume butto
to adjust the sou d level.
5. TUNER / BAND
Not i TUNER mode, press to set TUNER mode.
 I TUNER mode, press to cha ge the receivi g BAND
betwee FM a d AM
6. CD
Not i CD mode, press to set CD mode.
I CD mode, it has the same fu ctio as the DISC
SKIP key. Press to set or skip to ext valid disc i
asce di g order.
7. TAPE
Press to select the fu ctio of TAPE.
8. PHONO / AUX
Press to select the PHONO fu ctio or the AUX i put
source. Both of PHONO a d AUX are mixi g-cha el,
you ca liste a mixi g sou d if you play the PHONO
a d i put other sig al from the AUX at the same time.
9. FLAT
Press to select FLAT sou d mode.
10. ROCK
Press to select ROCK sou d mode.
11. CLASSIC
Press to select CLASSIC sou d mode.
12. POP
Press to select POP sou d mode.
FRONT PANEL

8
FUNCTIONAL OVERVIEW
FRONT PANEL
20. STOP / MEMO  DOWN
I CD mode, press to stop CD playi g a d exit CD
memory registratio mode. Whe CD is stop, press
this key to clear CD memory.
I TUNER mode, press to call the preset memory i
desce di g order.
21. REPEAT / MEMO  UP
 I CD mode, press to cha ge the followi g repeat play
mode cyclically: All disc, Repeat all disc, Repeat
o e disc, Repeat o e track.
I TUNER mode, press to call the preset memory i
asce di g order.
22. TUNING  DOWN / PREVIOUS
 I TUNER mode, press less tha 0.5 seco d to do
ma ual tu i g i desce di g order.
 I TUNER mode, press lo ger tha 0.5 seco d to do
auto tu i g i desce di g order.
 I CD mode, press less tha 0.5 seco d to move track
i desce di g order.
 I CD mode, whe CD is playi g, press lo ger tha
0.5 seco d to search i desce di g order.
 I clock or timer adjusti g e able state mode, press
to adjust clock time i desce di g order.
23. TUNING  UP / NEXT
 I TUNER mode, press less tha 0.5 seco d to do
ma ual tu i g i asce di g order.
 I TUNER mode, press lo ger tha 0.5 seco d to do
auto tu i g i asce di g order.
 I CD mode, press less tha 0.5 seco d to move track
i asce di g order.
 I CD mode, whe CD is playi g, press lo ger tha
0.5 seco d to search i asce di g order.
 I clock or timer adjusti g e able state mode, press
to adjust clock time i asce di g order.
24. INTRO
Press to set or release the i tro sca play mode i CD
mode.
25. PLAY / PAUSE
Press to begi playback of the CD a d press agai to
pause CD playback.
26. RANDOM
Press to toggle CD ra dom play mode, the RANDOM
i dicator appears o the display a d tracks o all discs
are played i ra dom order. Whe the last track of the
FRONT PANEL
last disc is played, the system will automatically stop,
u less you have selected REPEAT mode.
27. [ DECK A ] CASSETTE FUNCTION KEYS
 RECORD ............ Press to activate cassette
recordi g.
 PLAY .................. Press to activate cassette
playi g.
 REWIND............. Press activate cassette
rewi di g.
 F. FWD. ............. Press to activate cassette
fast for-wardi g.
 STOP / EJECT ... Press o ce to stop play, re-
wi d or fast forward. Press a
seco d time to eject the
cassette.
 PAUSE ............... Press to pause playback.
28. [ DECK B ] CASSETTE FUNCTION KEYS
 PLAY .................. Press to activate cassette
playi g.
 REWIND............. Press activate cassette
rewi di g.
 F. FWD. ............. Press to activate cassette
fast for-wardi g.
 STOP / EJECT ... Press o ce to stop play, re-
wi d or fast forward. Press a
seco d time to eject the
cassette.
 PAUSE ............... Press to pause playback.

9
FUNCTIONAL OVERVIEW
OFF will flash if Time OFF fu ctio is selected
by pressi g the MODE / REMAIN butto o the remote
co trol repeatedly.
11. INTRO
Illumi ates if you select the INTRO play fu ctio i CD
mode.
12. TOTAL
Illumi ates if you select the total remai time or total
time i CD ormal play mode.
13. REMAIN
Illumi ates if you select the each remai time or total
remai time i CD play mode.
14. STEREO
Illumi ates if a stereo sig al is received i tu er mode.
15.
Illumi ates duri g CD playback mode.
16.
Illumi ates whe CD playback has bee paused.
17. MHz/KHz
Illumi ates while the FM or AM statio has bee se-
lected i TUNER mode.
18. REC CD SYNC
Illumi ates if the CD-SYNC tape recordi g fu ctio has
bee selected.
19. DISC NUMBER
Illumi ates if the correspo di g tray has disc i CD
mode. If the tray is read a d ot be sure havi g disc,
the correspo di g disc umber will disappear from the
LCD.
LCD DISPLAY
1. MEMORY
Illumi ates if a y track or statio has bee stored to a
CD program or tu er memory i CD mode or TUNER
mode.
2. SLEEP
Illumi ates if you select the SLEEP fu ctio .
3. MUTE
Illumi ates if you select the MUTE fu ctio .
4. RANDOM
Illumi ates if you select the ra dom play fu ctio i CD
mode.
5. REPEAT
Illumi ates if you select the repeat play fu ctio i CD
mode.
6. ROCK
Illumi ates if the ROCK EQ mode is selected.
7. CLASSIC
Illumi ates if the CLASSIC EQ mode is selected.
8. POP
Illumi ates if the POP EQ mode is selected.
9. FLAT
Illumi ates if the FLAT EQ mode is selected.
10. ON / OFF
will illumi ate if the Timer is o by pressi g the
TIMER butto o the remote to select.
ON will flash if Time ON fu ctio is selected by
pressi g the MODE / REMAIN butto o the remote
repeatedly.
LCD DISPLAY
 "
!"# $ # & $ %
'&
%


'
!  " !"# $ # & $ %
'&
%


'
!

10
FUNCTIONAL OVERVIEW
REMOTE CONTROLREMOTE CONTROL
4. TUNER/BAND
 Not i TUNER mode, press to set TUNER mode.
 I TUNER mode, press to cha ge the receivi g BAND
betwee FM a d AM.
5. TAPE
Press to select the fu ctio of TAPE.
6. PH. / AUX
Press to select the PHONO fu ctio or the AUX i put
source. Both of PHONO a d AUX are mixi g-cha el,
you ca liste a mixi g sou d if you play the PHONO
a d i put other sig al from the AUX at the same time.
7. EQ
Press EQ butto repeatedly to cyclic select ROCK
CLASSIC, POPor FLAT EQ setti g, the adjace t i di-
cator will illumi ate.
8. 0 - 9 / +10
I CD mode, press to select favorite track.
I TUNER mode, press to select favorite preset sta-
tio .
9. MODE / REMAIN
I TUNER mode, press to cha ge the followi g dis-
play cyclically: Ba d a d Freque cy, Time display.
I CD ormal play mode, press to cha ge the follow-
i g display cyclically: Each playi g time, Each re-
mai i g time, Total remai i g time, Total playi g time,
Time display.
 I CD ra dom play mode, press to cha ge the follow-
i g display cyclically: Each playi g time, Each re-
mai i g time, Time display.
I CD memory play mode, press to cha ge the fol-
lowi g display cyclically: Each playi g time, Each re-
mai i g time, Program umber, Time display.
I CD stop mode, press to cha ge the followi g dis-
play cyclically: All time display, Time display.
I TAPE or AUX mode, press to cha ge the followi g
display cyclically: AUX or TAPE, Time display.
1. POWER
Press the POWER butto to switch the mai power of
the u it ON or STANDBY.
2. MUTE
Press to ca cel sou d. Press agai to retur the sou d
to its previous level. The MUTE i dicator will illumi ate
whe the MUTE fu ctio is o .
3. CD
 Not i CD mode, press to set CD mode.
I CD mode, it has the same fu ctio as the DISC
SKIP key. Press to set or skip to ext valid disc i
asce di g order.
INSTALLING BATTERIES:
1. Remove the battery cover from the back of the remote.
2. I sert 2XAA batteries i to the remote. E suri g correct (+)a d(-)polarity as
i dicated i the battery compartme t.
3. Replace the battery cover.
++
++
_
_
MUTE
1
9
RANDOM
SKIP
TIMER
TUNING
SEARCH
VOLUME
DISC-SKIP
EQ
+10
INTRO
M-DOWN/
STOP
M-UP/
REPEAT
OP EN /
CLOSE
PLAY/
PAUSE
5
0
678
43
AU
TAP E
TUNER/BAND
CD
2
POWER
+
_
SLEEP
MEMO/
C.ADJ

!
"
&
'
#
$
%
MODE/
REMAIN

11
FUNCTIONAL OVERVIEW
REMOTE CONTROL
NOTE: TheaboveTime display including:Clockdisplay,
Time ON, Time OFF.
10. MEMO / C-ADJ.
 I TUNER mode, press to store AM/FM statio s i the
memory locatio s.
I CD mode, press to do CD program i memory
locatio s.
I clock adjust mode, press to set clock or timer
adjustme t.
11. SLEEP
Press to select the SLEEP timer o or off. Keep press-
i g this key will set the sleep time from 00 to 90
mi utes.
12. INTRO
Press to set or release the i tro sca play mode i CD
mode.
13. OPEN / CLOSE
Press to ope or close the CD door.
14. RANDOM
Press to toggle CD ra dom play mode, the RANDOM
REMOTE CONTROL
i dicator appears o the display a d tracks o all discs
are played i ra dom order. Whe the last track of the
last disc is played, the system will automatically stop,
u less you have selected REPEAT mode.
15. DISC SKIP
I CD memory set mode, press to set to ext valid
disc umber i asce di g order.
 I CD ormal play or stop mode,press to skip to ext
valid disc i asce di g order.
Not i CD mode, press to skip to ext valid disc i
asce di g order whe the door is ope .
16. M-UP / REPEAT
 I CD mode, press to cha ge the followi g repeat play
mode cyclically: All disc, Repeat all disc, Repeat o e
disc, Repeat o e track.
I TUNER mode, press to call the preset memory i
asce di g order.
17. STOP / DOWN
I CD mode, press to stop CD playi g a d exit CD
memory registratio mode. Whe CD is stop, press
this key to clear CD memory.
I TUNER mode, press to call the preset memory i
desce di g order.
18. PLAY/PAUSE
Press to begi playback of the CD a d press agai to
pause CD playback.
19. SKIP (-) or (+)
 I TUNER mode, press less tha 0.5 seco d to do
ma ual tu i g.
 I TUNER mode, press lo ger tha 0.5 seco d to do
auto tu i g.
 I CD mode, press less tha 0.5 seco d to move track
up or dow .
 I CD mode, whe CD is playi g, press lo ger tha
0.5 seco d to search up or dow .
 I clock or timer adjusti g e able state mode, press
to adjust clock time.
20. VOLUME (-) or (+)
Press (+) or (-) butto to adjust the sou d level up or
dow .
++
++
_
_
MUTE
1
9
RANDOM
SKIP
TIMER
TUNING
SEARCH
VOLUME
DISC-SKIP
EQ
+10
INTRO
M-DOWN/
STOP
M-UP/
REPEAT
OP EN /
CLOSE
PLAY/
PAUSE
5
0
678
43
AU
TAP E
TUNER/BAND
CD
2
POWER
+
_
SLEEP
MEMO/
C.ADJ
!
"
 

$
%
'
&

#
MODE/
REMAIN

12
CLOCK SETTINGGENERAL
1. Press the POWER butto to tur the system o .
2. Select the source by pressi g the desired source se-
lector butto :
 Press the TUNER butto to liste a radio statio .
 Press the TAPE butto for audio cassette.
 Press the CD butto to liste a compact disc.
 Press the PHONO / AUX butto to select pho ograph
fu ctio or for a laser disc player, camcorder or VCR,
etc...
3. Press the VOLUME butto o the fro t pa el or o the
remote co trol to adjust the volume level up or dow .
4. Press the EQ butto repeatedly to cyclic select a pre-
set equalizer mode: ROCK , CLASSIC, POP or FLAT.
NOTE: The Graphic Equalizer separates and adjusts the
bass,midrangeandtreblelevels.Thesepresetselec-
tions adjust the sound to simulate and enhance the
acoustical effects of ROCK, CLASSIC, POP or FLAT.
5. Press the MUTE butto to ca cel the sou d. The MUTE
i dicator will illumi ate. Press agai to retur to origi-
al sou d level.
AMPLIFIER TIMER SETTING
1. Tur the system o a d press the MODE / REMAIN
butto u til the clock appears i the display.
2. Press the MEMO / C-ADJ butto o ce time, hour digit
will flash a d press the TUNING  DOWN / PREVIOUS
or TUNING  UP / NEXT butto u til the correct hour
digit appears.
3. Press the MEMO / C-ADJ butto agai , mi ute digit
will flash a d press the TUNING  DOWN / PREVIOUS
or TUNING  UP / NEXT butto u til the correct mi ute
digit appears, a d the press MEMO / C-ADJ butto to
co firm the setti g.
TIME ON SETTING
1. Tur the system o a d press the MODE / REMAIN
butto u til the Time ON appears.
Your music ce ter ca automatically tur itself o or off
whe the o or off time arrive.
TIME ON / OFF SETTING

13
TIMER SETTING
3. Press the MEMO / C-ADJ butto agai , mi ute digit will
flash a d press the TUNING  DOWN / PREVIOUS or
TUNING  UP / NEXT butto u til the correct mi ute
digit appears, a d the press MEMO / C-ADJ butto to
co firm the setti g.
TIME OFF SETTING
1. Press the MODE / REMAIN butto u til the Time OFF
appears.
2. Press the MEMO / C-ADJ butto o ce time,hour digit
will flash a d press the TUNING  DOWN / PREVIOUS
or TUNING  UP / NEXT butto u til the correct hour
digit appears.
Your system ca automatically tur itself off after 10 to 90
mi utes. Choosi g the period that you wish system to stay
o , a d whe the  SLEEP time arrives, the system will
tur itself off automatically.
1. Tur the system o a d press SLEEP butto , the
 SLEEP i dicator will illumi ate.
2. Press the SLEEP butto co ti uously to set the sleep
time from 90 to 10.
4. Press the TIMER butto u til the appears, the
press the POWER butto to tur the system to
STANDBY mode.
NOTE: Make sure the is appearing, the system will
automatically turn on/off itself when set time arrive.
SLEEP TIMER
3. Press the MEMO / C-ADJ butto agai , mi ute digit will
flash a d press the TUNING  DOWN / PREVIOUS or
TUNING  UP / NEXT butto u til the correct mi ute
digit appears, a d the press MEMO /C-ADJ butto to
co firm the setti g.
2. Press the MEMO / C-ADJ butto o ce time,hour digit
will flash a d press the TUNING  DOWN / PREVIOUS
or TUNING  UP / NEXT butto u til the correct hour
digit appears.

14
TURNTABLE
PHONO PHONO
CONTROLS AND FEATURES
1. Tur table platter
2. Cuei g lever
3. Speed selector
4. To e arm
5. To e arm rest
6. 45 rmp Adaptor
PLAYING A RECORD:
1. Switch the system o usi g the POWER butto .
2. Remove the stylus cover.
3. U lock the to e arm usi g the to e arm lock.
4. Use the fu ctio selector to select the PHONO / AUX
positio .
5. Set the speed selector to either 33 rpm or 45 rpm
accordi g to the recordd to be played.Use the 45 rpm
spri dle adaptor to play 45 rpm records which do ot
have a ce te.
6. Place a record o the tur table. Usi g the cuei g lever,
raise the to e arm. Move the to e arm outwards, away
from the tur table platter. The tur table platter will start
to rotate.
7. Move the to e arm over the record a d release ge tly
lower the Cuei g Lever, The stylus will lower o to the
record a d start to play.
8. Adjust the VOLUME co trol to obtai the desired
liste i g level.
9. Adjust the graphic equalizer to suit your liste i g
pleasure.
10. Duri g play(if you wish so) move the to e arm i wards
towards the ce ter of the tur table platter, thus switchi g
it off, E sure the to e arm is replaced a d locked
correctly usi g the to e arm lock. This will avoid damage
to the stylus whe the record deck is ot i use.
11. Whe the record has fi ished playi g, the tur table platter
will switch off automatically. Secure to e arm usi g the
to e arm lock.
NOTE: If you input signal from AUX jack while Phono is
playing,youmayhearboth simultaneously.
!!
"#

!
"
#
$

15
CD CHANGER
NORMAL CD PLAYBACKLOADING A DISC INTO THE CD TRAY
DISC STATUS
To check the disc status, first press the PLAY / PAUSE
butto to start playback, the press the DISC SKIP butto
o ce for each disc.
1. Whe the particular disc tray is bei g checked by the
playback se sor, the total tracks umber a d total time
will be read a d appeared.
2. If there is o disc i the selected tray, the disc umber
i dicator light will go out.
1. Press the PLAY / PAUSE butto to start playback.
Press repeatly to start or pause the CD playback.
2. The playback se sor will search the disc trays.
3. If the first disc tray is empty, the disc umber i dicator
for that disc will disappear. The the playback se sor
will detect the ext disc a d the semi-circle i dicator
for the ext disc will illumi ate.
4. Whe the first disc is fou d, it will immediately begi to
read a d appear the total tracks umber a d total time
of this disc. Press the PLAY / PAUSE butto to begi
to playback from track 1.
5. Press the TUNING  DOWN / PREVIOUS or TUNING
 UP / NEXT butto briefly to select the desired track.
6. Press a d hold the TUNING  UP / NEXT butto to
move forward.
7. Press a d hold the TUNING  DOWN / PREVIOUS
butto to move backward.
8. Press the STOP / MEMO  DOWN butto to stop CD
playback.
9. You ca i terrupt CD playback by pressi g PLAY /
PAUSE. Press the same key agai to resume play-
back.
10. To select a other disc, simply press the DISC SKIP or
CD butto repeatedly u til the desired disc is selected.
1. Press the POWER butto to switch o the system.
2. Select the CD fu ctio by pressi g the CD butto o
the fro t pa el. You ca also press the CD butto o
the remote co trol.
3. The disc i dicator correspo di g to the curre tly se-
lected disc will be surrou ded by a illumi ati g semi-
circle at all times.
4. Press the OPEN / CLOSE butto to ope the CD door.
5. I sert o ly o e disc i to each of the five CD trays.
6. To i sert a disc i to the fifth tray, press the DISC SKIP
or CD butto a d the fifth disc positio will rotate to the
fro t automatically.
7. Press the OPEN / CLOSE butto agai to close the
CD door.
1
2345
5
1
234

16
CD CHANGER
CD REPEAT PLAYBACK
1. Press the RANDOM butto before or duri g play.
2. The RANDOM i dicator illumi ates a d tracks are ow
played i a ra dom order.
CD RANDOM PLAYBACK
3. Each time you press the TUNING  UP / NEXT butto
to select the ext ra dom track.
4. Press the TUNING  DOWN / PREVIOUS butto to
retur to the begi i g of the track.
5. Press the RANDOM butto agai if you wish to retur
to ormal play.
3. Press the REPEAT / MEMO  UP butto three times
before or duri g playback to select the REPEAT ONE
mode. Whe this mode is selected, the same track
will be played repeatedly.
4. Press the REPEAT / MEMO  UP butto four times to
ca cel the Repeat Playback fu ctio .
1. Press the REPEAT / MEMO  UP butto o ce before
or duri g playback to select the REPEAT ALL DISC
mode, a d the ″ REPEAT ALL DISC ″ i dicator will
illumi ate. Whe this mode is selected, the tracks o
all discs will be played repeatedly.
CD REPEAT PLAYBACK
2. Press the REPEAT / MEMO  UP butto twice before
or duri g playback to select the REPEAT ONE DISC
mode, a d the ″ REPEAT ONE DISC ″ i dicator will
illumi ate. Whe this mode is selected, all tracks o
o e particular disc will be played repeatedly.
DISPLAYING TIME INFORMATION
1. I CD ormal play mode, press MODE / REMAIN but-
to to cha ge the followi g display cyclically:
Playi g time of curre t track.
 Remai i g time of curre t track.
1
2345
1
2345
1
2345
1
2345
1
2345
1
2345

17
CD CHANGER
CD PROGRAM ( CD MEMORY )
1. I CD stop mode, press the MEMO / C-ADJ butto to
select the program umber appears o the display.
2. The track umber, program umber a d  MEMORY
i dicators will flash.
4. Press the MEMO / C-ADJ. butto to store the track
umber you selected i to the CD program, a d the CD
program umber shows o LCD display.
5. Select a other track umber a d store the track i to
the CD program by above step 3 to step 4.
NOTE: Up to 40 CD tracks (00 ~ 39) ca be programmed.
6. After the CD program has bee do e, press the PLAY
/ PAUSE butto to start playi g the programmed tra-
cks.
7. I CD stop mode, Press MEMO/C-ADJ a d the STOP
/ MEMO DN butto o the fro t pa el or remote co -
trol to erase program.
NOTE: Whe the CD program has bee do e, you ca
o ly play the memory tracks. U less you erase the CD
program, the CD ormal playi g ca ot be resumed to
do.
 Total remai i g time of curre t disc
 Total playi g time of curre t disc.
3. Select the umber of disc by pressi g the DISC SKIP
butto , a d press the TUNING  UP / NEXT or TUNING
 DOWN / PREVIOUS butto u til the desired track
umber that you wish to program appears o the dis-
play.
1
2345
1
2345
1
2345
1
2345

18
TAPE PLAYER
RECORDING [ DECK A ]
Record ng from TAPE to TAPE
1. I sert a bla k tape i to [ DECK A ].
2. I sert the tape to be copied i to [ DECK B ].
3. Press the PAUSE butto o [ DECK A ], the press
the RECORD butto . Press the PLAY butto o [ DECK
B ] to begi dubbi g.
4. If you wish to double the recordi g speed, simply de-
press the ST. / NOR & MONO. / H.S.D. butto to
HSD mode before starti g.
NOTE: When the HSD (High Speed Dubbing) function is
activated, the playback speed of [ DECK B ] will also
double.
5. To ca cel the HSD fu ctio , press the ST. / NOR &
MONO. / H.S.D. butto agai .
6. To stop or pause the recordi g, press the STOP / EJECT
or PAUSE butto o [ DECK A ].
7. To stop or pause playback, press the STOP / EJ or
PAUSE butto o [ DECK B ].
Record ng from CD to TAPE
1. I sert a bla k tape i to [ DECK A ].
2. Select CD fu ctio by pressi g the CD butto o the
fro t pa el or remote co trol.
3. I sert the CD disc which is to be copied to the bla k
tape i [ DECK A ].
4. Press the RECORD a d PLAY butto s o [ DECK A ]
to start the CD-to-TAPE sy chro recordi g. The ″ REC
CD SYNC ″ i dicator will illumi ate o the LCD a d
the CD will start at the same time.
LOADING ONE TAPE
3. Depress the STOP / EJECT butto of either [ DECK A]
or [ DECK B ] to ope the door.
4. I sert o ly o e tape i to either [ DECK A ] or [ DECK
B ].
5. To close the tape deck door, simply push the door back
to its previous positio .
1. Press the POWER butto to switch o the system.
2. Select the TAPE fu ctio by pressi g the TAPE butto
o the fro t pa el or remote co trol.
NORMAL PLAYBACK [ DECK A ] or [ DECK B ]
1. Press the PLAY butto to start playback.
2. Depress the REW butto to rewi d the tape.
3. Depress the F.FWD butto to start fast forward.
4. Depress the STOP / EJECT butto to stop tape play-
back. Depress the STOP / EJECT butto agai to ope
the tape deck door.
5. You ca i terrupt tape playback by pressi g the PAUSE
butto . Press the same butto agai to resume play-
back.
1
2345