Memorex MVBD2510 - Blu-Ray Disc Player User manual

Contents..................................................................1
Important Safety Instructions ...............................2
Features ..................................................................4
Precautions.............................................................5
Power Source .........................................................5
Location of Controls ..............................................6
• Front....................................................................6
• Rear ....................................................................6
• Remote ...............................................................7
Remote Control ......................................................8
• Battery Installation ..............................................8
• ffective Distance of the Remote
Control Transmitter .............................................8
Connection..............................................................9
• Connecting the Player to a TV Using the
Audio/Video Output Jacks ..................................9
• Connecting the Player to a TV using the
S-Video Output Jack...........................................9
• Connecting the Player to a TV Using the
Y/PB/PRJacks ..................................................10
• Progressive (Y, PB, PR) Video Output ..............10
• 525 Line Digital Progressive-scan Component
Video Output.....................................................10
• Connecting the Player to a TV using the
HDMI Output Jack.............................................11
• Connecting the Player to a TV using a
DVI Cable..........................................................12
• Connecting the Player to a Home Theater
System (via Coaxial Jack) ................................13
• Connecting the Player to a Home Theater
System (via 5.1 Channel Output Jacks) ...........14
About Discs ..........................................................15
Setup Menu ...........................................................17
• General Setup Menu.........................................17
• Video Setup Menu ............................................18
• Audio Setup Menu ............................................19
• Language Setup Menu .....................................21
• Setting the Parental Control Options................22
Basic Operation....................................................24
• Mute ..................................................................24
• Color Buttons ....................................................24
• Video Resolution...............................................24
BD/DVD Operation................................................25
• Playback of a Blu-Ray disc or a DVD...............25
• Skip ...................................................................26
• Search...............................................................26
• Pause and Step ................................................26
• Slow ..................................................................26
• Top Menu Button...............................................27
• Title/Menu Button..............................................27
• Pop Menu..........................................................27
• Time Search......................................................28
• Info-Title/Chapter Search..................................28
• Repeat Playback...............................................28
• PIP (Picture in Picture) .....................................28
• Zoom.................................................................29
• Angle.................................................................29
• Subtitle ..............................................................29
• Audio.................................................................29
MP3/WMA Operation ............................................30
• Playback of an MP3 Disc..................................30
• Selecting Folders/Tracks Using the SKIP
Buttons..............................................................32
• Repeat Play ......................................................32
• MP3 FAQs.........................................................32
CD Operation ........................................................33
• Playback of a CD..............................................33
• Selecting Tracks/Files Using the
Number Buttons................................................34
• Selecting Tracks/Files Using the SKIP
Buttons..............................................................34
• Forward/Reverse Search..................................34
• Repeat/Random................................................34
Data CD/USB Operation.......................................35
• Playback of a Data CD/USB.............................35
Troubleshooting Guide ........................................37
Care and Maintenance .........................................39
Specifications .......................................................40
1
CO TE TS

2
IMPORTA T SAFETY I STRUCTIO S
CAUTION: TO R DUC TH RISK OF L CTRIC SHOCK, DO NOT
R MOV TH COV R (OR BACK). NO US R-S RVIC ABL PARTS
AR INSID . R F R S RVICING TO QUALIFI D S RVIC P RSONN L.
This Caution Marking is located at the rear enclosure of the unit.
CAUTIO
RISK OF ELECTRIC SHOCK
DO OT OPE
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTIO :
THIS DIGITAL VID O DISC PLAY R MPLOYS A
LAS R SYST M.
TO NSUR PROP R US OF THIS PRODUCT,
PL AS R AD THIS OWN R’S MANUAL CAR FULLY
AND R TAIN FOR FUTUR R F R NC . SHOULD
TH UNIT R QUIR MAINT NANC , CONTACT AN
AUTHORIZ D S RVIC LOCATION-S S RVIC
PROC DUR .
US OF CONTROLS, ADJUSTM NTS OR TH
P RFORMANC OF PROC DUR S OTH R THAN
THOS SP CIFI D H R IN MAY R SULT IN
HAZARDOUS RADIATION XPOSUR .
TO PR V NT DIR CT XPOSUR TO LAS R B AM,
DO NOT TRY TO OP N TH NCLOSUR . VISIBL
LAS R RADIATION MAY B PR S NT WH N TH
NCLOSUR IS OP N D. DO NOT STAR INTO B AM.
FCC OTICE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
FCC CAUTIO :
To assure continued compliance, follow the attached installation
instructions and use only shielded cables when connecting to other
devices. Also, any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
MB-003 du Canada.
WAR I G:
TO R DUC TH RISK OF FIR OR L CTRIC
SHOCK, DO NOT XPOS THIS PRODUCT TO RAIN
OR MOISTUR .
WAR I G:
TO R DUC TH RISK OF FIR OR L CTRIC
SHOCK, AND ANNOYING INT RF R NC , US TH
R COMM ND D ACC SSORI S ONLY.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC
connection. Lightning and power surges AR NOT
covered under warranty for this product.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued & pending. DTS is
a registered trademark and the DTS logos, Symbol, DTS-HD
and DTS-HD Advanced Digital Out are trademarks of DTS,
Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
The symbol for class II
(Double Insulation)
LASER WAR I G:
This unit employs a laser. Only qualified service
personnel should attempt to service this device due to
possible eye injury.
ATTE TIO :
POUR ÉVIT R L S CHOC ÉL CTRIQU S, INTRODUIR LA
LAM LA PLUS LARG D LA FICH DANS LA BORN
CORR SPONDANT D LA PRIS S T POUSS R JUSQU’AU
FOND.

3
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat source such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the Power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as the power-supply cord or plug is damaged, liquid has been spilled on or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids such as vases shall be
placed on the apparatus. Maintain well-ventilated conditions around the product. Do not place on a bed, sofa, or
anything that blocks ventilation.
Where the main plug is used as the disconnect device, the disconnect device shall remain readily operable.
IMPORTA T SAFETY I STRUCTIO S (CO TI UED)

This unit has many features, some are outlined below. Please read the owner’s manual to take full advantage of
all the features this unit has to offer.
•BD-ROM Playback
BD-ROM is a next generation optical disc format in the HD era. Featuring massive storage capacity of 25 to
50 GB (five times larger than a DVD) and a high-speed transfer rate of up to 54 Mbps, this format offers not
only uncompromised HD quality video*†, but also enables rich bonus content on a single disc and HD quality
audio up to 8ch, and interactive operability.
* A compatible HD display device is necessary to enjoy the same quality.
†Some discs allow viewing only with an HDMI connection.
•24p True Cinema
Movies shot with a film camera consist of 24 frames per second. Since conventional televisions (both CRT
and flat panels) display frames either at 1/60 or 1/50 second intervals, the 24 frames do not appear at an
even pace.
When connected to a TV with 24p capabilities, the player displays each frame at 1/24 second intervals —
the same interval originally shot with the film camera, thus faithfully reproducing the original cinema image.
•BD-J application
The BD-ROM format supports Java for interactive functions. “BD-J” offers content providers almost unlimited
functionality when creating interactive BD-ROM titles. Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
•Support of uncompressed multi-channel Linear PCM
In combination with a compatible AV amplifier, the player can output up to 8ch Linear PCM surround sound.*
With a non-compatible amplifier, the player can output 5.1ch analog signals from its 5.1CH OUTPUT jack for
high quality audio enjoyment.
* Note that the DIGITAL OUTPUT (COAXIAL or OPTICAL) jack does not output 8ch signals. You will need
an HDMI cable and an HDMI compatible device that support 8ch signals.
•Support of “Dolby TrueHD” and “DTS-HD” - 7.1 Channel Surround Sound
The player supports the bitstream output functionality of Dolby TrueHD, Dolby Digital Plus, and DTS-HD
High Resolution Audio bitstream via HDMI. It also supports the decoding functionality of Dolby TrueHD,
Dolby Digital Plus, and DTS-HD High Resolution Audio to multi-channel Linear PCM via HDMI.
•HDMI (High-Definition Multimedia Interface) digital interface
When connected to an HDMI-equipped display device using a single HDMI cord, the player can output both
SD to HD video and multi-channel audio signals, in digital form without degradation. The HDMI specification
supports HDCP (High-bandwidth Digital Content Protection), a copy protection technology that incorporates
coding technology for digital video signals.
•Library function for recorded files (For JPEG image, MP3 audio and WMV9 files only)
With DATA-DVDs and DATA-CDs, three separate Audio/Video/Picture/All Title List-browsers allow for easy
sorting, searching and playback.
4
FEATURES

5
PRECAUTIO S
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V,
60Hz.
OTE: The AC plug supplied with the unit is polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut
the wide blade. It is the user’s responsibility to have an electrician replace the obsolete
outlet.
AC Plug
AC Outlet
OTES O HA DLI G:
• When shipping the player, always use the original
shipping carton and packing materials. For maximum
protection, repack the unit as it was originally packed
at the factory.
• Do not use volatile liquids, such as insect spray, near
the player. Do not leave rubber or plastic products in
contact with the player for a long time. They will leave
marks on the finish.
• The top and rear panels of the player may become
warm after a long period of use. This is normal and
not a malfunction.
• When the player is not in use, be sure to remove the
disc and turn off the power.
• If you do not use the player for a long period, the unit
may not function properly in the future. Turn on and
use the player occasionally.
OTES O LOCATI G THE PLAYER:
• When you place this player near a TV, radio or VCR,
the playback picture may become poor and the sound
may be distorted. In this case, move the player away
from the TV, radio or VCR.
OTES O CLEA I G:
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
or benzene, as it may damage the surface of the
player.
• If you use a chemical-saturated cloth to clean the unit,
follow that product’s instructions.
Warning: Cleaning and adjustment of lenses and/or
other components of playback mechanism should be
performed by a qualified service technician.
OTES O MOISTURE CO DE SATIO :
Moisture condensation damages the player. Please
read the following carefully.
• Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same
way, moisture may condense on the optical pick-up
lens inside this unit, one of the most crucial internal
parts of the player.
Moisture condensation occurs during the following
cases:
• When you bring the player directly from a cold place
to a warm place.
• When you use the player in a room where you just
turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
• In summer, when you use the player in a hot and
humid place just after you moved the unit from an air
conditioned room.
• When you use the player in a humid place.
Do not use the player when moisture condensation
may occur.
• If you use the player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the player to the wall outlet,
turn on the player and leave it “ON” for two or three
hours. After two or three hours, the player will have
warmed up and evaporated any moisture. Keep the
player connected to the wall outlet and moisture
condensation will seldom occur.
TO OBTAI A CLEAR PICTURE:
The player is a high technology, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a clear
picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every 1,000
hours of use depending on the operating environment.
For details, contact your nearest dealer.

13 56478 92
1. Power/Standby Indicator
2. POWER/STA DBY Button
3. Disc Compartment
4. OPE /CLOSE Button
5. Display
6. PLAY (®) Button
7. STOP ( XX) Button
8. Skip (oo) Button
9. Skip (nn) Button
10. Resolution Indicators
11. USB Jack
6
LOCATIO OF CO TROLS
FRO T
21 3 4 5 6 7 8 9 10 11
1. HDMI Jack
2. Video Output Jack
3. S-Video Output Jack
4. Component Video (Y, PB, PR) Output Jacks
5. COAXIAL Output Jack
6. OPTICAL Output Jack
7. Stereo Audio Left/Right Output Jacks
8. 5.1 Channel Audio Output Jacks
9. AC Power Cord
REAR

7
LOCATIO OF CO TROLS (CO TI UED)
1. STA DBY Button
2. RESOLUTIO Button
3. A GLE Button
4. umber (0–9) Buttons
5. TOP ME U Button
6. avigation (√√,®®,††,ππ) Buttons
7. PLAY Button
8. PAUSE/STEP Button
9. AUDIO Button
10. MUTE Button
11. SUBTITLE/USB Button
12. SLOW Button
13. Red (A) Button
14. Green (B) Button
15. OPE /CLOSE Button
16. I FO Button
17. SEARCH Button
18. PIP Button
19. REPEAT Button
20. SETUP Button
21. ZOOM Button
22. TITLE Button
23. POP ME U Button
24. E TER Button
25. RETUR Button
26. STOP Button
27. Skip/ EXT (nn) Button
28. Skip/PREVIOUS (oo) Button
29. SEARCH/FORWARD ®®®® Button
30. SEARCH/REVERSE √√√√ Button
31. Yellow (D) Button
32. Blue (C) Button
REMOTE CO TROL PART O. 13RE1-180002-00R*
BATTERY COVER PART O. 13RE1-180002-00R-CV*
A/V RCA Cable - PART O. 13WE1-311200-10R*
*Consumer Replaceable Part (See page 38 to order.)
REMOTE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
16
18
19
20
22
23
21
24
25
26
27
28
29
30
31
32

8
REMOTE CO TROL
BATTERY I STALLATIO
EFFECTIVE DISTA CE OF THE REMOTE CO TROL TRA SMITTER
OTES:
• When there is an obstacle
between the Player and the
transmitter, the transmitter may
not operate.
• When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the R MOT
S NSOR of the Player, the
remote operation may be
unstable.
BATTERY PRECAUTIO S
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the Battery Compartment. A reversed
battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable, and Carbon-zinc) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery
manufacturer’s directions.)
+
+
–
–
1. Remove the Battery Compartment cover by sliding the cover off.
2. Install two (2) “AAA” batteries, paying attention to the polarity diagram
in the battery compartment.
3. Replace the Battery Compartment cover.

9
CO ECTIO
OTES:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component, S-
Video or Video OUT jack on the player.
• Set the TV’s TV/VID O button or switch to the VID O setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply
store.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• The video source is always output in 480i resolution, regardless of the setup menu settings.
CO ECTI G THE PLAYER TO A TV USI G THE AUDIO/VIDEO OUTPUT JACKS
CO ECTI G THE PLAYER TO A TV USI G THE S-VIDEO OUTPUT JACK

10
CO ECTIO (CO TI UED)
CO ECTI G THE PLAYER TO A TV USI G THE Y/PB/PRJACKS
OTES FOR CO ECTI G TO A TV:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component, S-
Video or Video OUT jack on the player.
• TV must have Y, PB and PR input jacks.
• Set the TV’s TV/VID O button or switch to the VID O setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
• When using the component jacks as your source, setup the HD resolution in the Video menu as described on page 18.
PROGRESSIVE (Y, PB, PR) VIDEO OUTPUT:
Use these jacks to connect to a TV with progressive video input jacks. Progressive scan is a video scanning system that
displays all lines in a frame in one pass, as opposed to the traditional system, interlaced scan. This connection provides
optimum quality. To ensure maximum picture quality, use three video-grade cables for connections. Note that it is essential
to match the color-coded connectors with a compatible TV.
525 LI E DIGITAL PROGRESSIVE-SCA COMPO E T VIDEO OUTPUT
Compared to standard interlaced video, progressive scan effectively doubles the amount of video information fed to your TV
or monitor. The result is a stable, flicker-free image. (Check your TV/monitor for compatibility with this feature.)
For the very highest picture quality, try watching a movie on DVD-Video on a progressive-scan compatible TV.
OTES:
• CONSUM RS SHOULD NOT THAT NOT ALL HIGH D FINITION T L VISION S TS AR FULLY COMPATIBL
WITH THIS PRODUCT AND MAY CAUS ARTIFACTS TO B DISPLAY D IN TH PICTUR . IN CAS OF 525
PROGR SSIV SCAN PICTUR PROBL MS, IT IS R COMM ND D THAT TH US R S T TH VID O S TTING
TO 480i OR 1080i INT RLAC S TTINGS, S PAG 18.

11
CO ECTIO (CO TI UED)
CO ECTI G THE PLAYER TO A TV USI G THE HDMI OUTPUT JACK
OTES:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component, S-
Video or Video OUT jack on the player.
• Set the TV’s TV/VID O button or switch to the VID O setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
•When using HDMI as your source, setup the HD resolution in the Video menu as described on page 18 and the Digital Output
in the Audio menu as described on page 19.
• The player’s video output will automatically change to HDMI when the HDMI cable is connected and the power is on.
• When you connect the HDMI cable to a TV for the first time, the HMDI output resolution will be automatically set to the highest
provided by the TV.

12
CO ECTIO (CO TI UED)
CO ECTI G THE PLAYER TO A TV USI G A DVI CABLE
OTES:
• Set the TV’s TV/VID O button or switch to the VID O setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
•When using HDMI as your source, setup the HD resolution in the Video menu as described on page 18.
• The player’s video output will automatically change to HDMI when the HDMI cable is connected and the power is on.
• When you connect the HDMI cable to a TV for the first time, the HMDI output resolution will be automatically set to the highest
provided by the TV.

13
CO ECTIO (CO TI UED)
CO ECTI G THE PLAYER TO A HOME THEATER SYSTEM (VIA COAXIAL JACK)
OTES FOR CO ECTI G TO A TV:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component, S-
Video or Video OUT jack on the player.
• Set the TV’s TV/VID O button or switch to the VID O setting.
• When connecting the Player, refer to the owner’s manuals for the TV and the audio system, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making any connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
• If you place the player near a tuner, the radio broadcast sound might be distorted. In this case, move the player away
from the tuner.
• When using this connection, Blu-Ray discs with an LPCM audio soundtrack will only be heard over the front two
channels.

14
CO ECTIO (CO TI UED)
CO ECTI G THE PLAYER TO A HOME THEATER SYSTEM (VIA 5.1 CHA EL OUTPUT JACKS)
OTES FOR CO ECTI G TO A TV:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component, S-
Video or Video OUT jack on the player.
• Set the TV’s TV/VID O button or switch to the VID O setting.
• When connecting the Player, refer to the owner’s manuals for the TV and the audio system, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making any connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
• If you place the player near a tuner, the radio broadcast sound might be distorted. In this case, move the player away
from the tuner.

15
ABOUT DISCS
PLAYABLE DISCS:
The following discs can be played back
on this player:
DISC TYPES:
DVD/BD
Data on most discs is divided into sections called “titles” and
then into subsections called “chapters”, each of which is
given a title or chapter number. Some features of this player
will not operate with some discs as they are preset. If a
function you selected does not run as desired, refer to the
manual accompanying the disc.
AUDIO CD
Data on an audio CD is divided into sections called “tracks”,
each of which is given a track number.
KODAK PICTURE CD
Data on a Kodak picture CD is usually not divided into
separate folders, and should appear in the root directory.
The region/BD-ROM codes for this player are listed on the back of the player. See the following page
for information regarding region/BD-ROM codes.
MP3
When playing an MP3, the total number of files will appear in the display, and the TV screen will list the folders/tracks.
MP3 is the abbreviation of “MP G1 Audio Layer 3”. MP G Audio is a format that compresses the audio portion only.
IMPORTA T OTES:
Due to many variables, including recording condition, type of disc, writing software, etc., this unit does not guarantee
playback of all MP3 discs.

DVD-R/RW
This disc can be played in this player once it has been finalized by the recording unit.
IMPORTA T:
It is important that you read the manual that accompanies the disc, as there are features that are on
the player that cannot be used with certain discs. There are also extra features on the disc that are
different for each disc, so they are not explained in this owner’s manual.
This player conforms to the TSC and PAL color systems. However, if you are in
the USA, leave this setting on TSC. If incorrectly set to PAL, the TV picture will
roll vertically. In this case, simply turn the Player off, and then back on.
otes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent copyrighted
material without permission. Video discs are copy protected, and any recordings made from these
discs will be distorted. This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Region Management Information:
This Player is designed and manufactured to respond to the Region Management Information that is
recorded on a disc. If the Region number described on the disc does not correspond to the Region
number of this player, this player cannot play that disc. You may not be able to play back some video
discs on this player if they were purchased from outside your geographic area or made for business
purposes.
16
ABOUT DISCS (CO TI UED)

17
Use this option to reset all the settings to their original factory
settings.
Select the General menu as shown above. Select Reset
Settings using the Navigation (π,†) buttons 1, then press
the Navigation (®) button 1; “Are you sure?” will appear.
Press the NT R button 2, then select Y S using the
Navigation (√,®) buttons 1 and press the NT R button 2
again to reset the settings.
1
2
1
Imation may offer upgrades to your player’s firmware in the
future. To upgrade, go to www.memorexelectronics.com and
download the latest firmware, then load on a CD. Select the
General menu as shown above. Select Update Firmware
using the Navigation (π,†) buttons 1, then press the
Navigation (®) button 1; “CD ROM” will appear. Press the
NT R button 2, then select Y S using the Navigation
(√,®) buttons 1 and press the NT R button 2 again.
Insert the CD and the updated firmware will install.
1
2
1
GE ERAL SETUP ME U:
To enter the General Setup menu, press the S TUP button, select General using the Navigation (π,†) buttons and then
press the Navigation (®) button.
RESET SETTI GS UPDATE FIRMWARE
Use this option to view the Software version.
Select the General menu as shown above. Select Software
Version using the Navigation (π,†) buttons 1, then press
the Navigation (®) button 1; “View” will appear. Press the
NT R button 2to view the software version and firmware
version.
1
2
1
SOFTWARE VERSIO
SETUP ME U
OTES:
•Press the S TUP button to exit the Setup menus.
• Press the R TURN button to return to the previous setting.

18
Use this option to set the desired TV Aspect.
Select the Video menu as shown above. Select TV ASP CT
using the Navigation (π,†) buttons 1, then press the
Navigation (®) button 1; the TV ASP CT options will appear.
Select one of the options (described below) using the Navigation
(π,†) buttons 1, then press the NT R button 2.
4:3 PA -SCA : Select when the unit is connected to a
conventional TV. Video material formatted in the Pan Scan style
is played back in that style (the left and right edges are cut off).
4:3 LETTERBOX: Select when the unit is connected to a
conventional TV. Wide-screen images are shown on the screen
with a black band at the top and/or bottom.
16:9 WIDE: Select when the unit is connected to a wide-screen
TV.
1
2
1
VIDEO SETUP ME U:
To enter the Video Setup menu, press the S TUP button, select Video using the Navigation (π,†) buttons and then press
the Navigation (®) button.
TV ASPECT
Use this option to set the desired resolution when connected
to the component video output, or HDMI output. The true
output resolution depends on the connection used and the
TV’s resolution.
Select the Video menu as shown above. Select Resolutions
using the Navigation (π,†) buttons 1, then press the
Navigation (®) button 1; the Resolution options will appear.
Select one of the options (480i, 480p, 720p, 1080i, 1080p,
1080p24) using the Navigation (π,†) buttons 1, then press
the NT R button 2.
See charts below for resolutions.
1
2
1
RESOLUTIO S
SETUP ME U (CO TI UED)
OTES:
• Some movies will be displayed in 4:3 pillar box format (black bars on the sides of the picture), even if 16:9 Wide is
selected in TV Aspect menu option.
• To use the 1080p24 (MovieFrame 24 Frames Per Second), the Blu-Ray disc must have this feature.
• The corresponding Resolution indicator will light up when the video signal outputted is 720p, 1080i, or 1080p.
•Press the S TUP button to exit the Setup menus.
• Press the R TURN button to return to the previous setting.

19
Use this option to set the Digital Output. See the chart below for specific outputs.
Select the Audio menu as shown above. Select Digital Output using the
Navigation (π,†) buttons 1, then press the Navigation (®) button 1; the Digital
Output options will appear. Select one of the options (described below) using the
Navigation (π,†) buttons 1, then press the NT R button 2.
S/PDIF: Select this when your equipment is connected via Optical/Coaxial
cable. Select as follows:
PCM: Decodes using the internal decoder and outputs the audio in PCM form
from the S/PDIF output jack(s).
BITSTREAM: Outputs the original bit stream directly from the S/PDIF output
jacks.
HDMI AUDIO: Select this when your equipment is connected via HDMI cable.
Select as follows:
PCM: Decodes using the internal decoder and outputs the audio in PCM form
from the HDMI output jack.
BITSTREAM: Outputs the original bit stream directly from the HDMI output
jack.
1
2
1
AUDIO SETUP ME U:
To enter the Audio Setup menu, press the S TUP button, select Audio using the Navigation (π,†) buttons and then press
the Navigation (®) button.
DIGITAL OUTPUT
SETUP ME U (CO TI UED)
General
Video
Audio
Language
Parental
Digital Output
PCMDown Sampling
DynamicCompression
Speaker
Selectthe digital audio outputconrector
General
Video
Language
Parental
Audio

20
SETUP ME U (CO TI UED)
Use this option to turn the PCM down sampling On or Off.
Some amplifiers cannot support the high sampling rate of the
PCM signal. In this case, turn this option ON and the player
will output at 48kHz.
Select the Audio menu as shown on the previous page. Select
PCM DOWN SAMPLING using the Navigation (π,†) buttons
1, then press the Navigation (®) button 1; “ON” and “OFF’
will appear. Select ON to turn on this option or OFF to turn off
this option using the Navigation (π,†) buttons 1, then press
the NT R button 2.
OTE: ven when PCM down sampling is set to OFF, some
discs will show output down sampled audio through the
coaxial and optical digital outputs.
1
2
1
Use this option to turn the Dynamic Compression On or Off.
Dynamic compression means reducing the gap between the
loudest and softest sounds. This means you can listen at lower
levels.
Select the Audio menu as shown on the previous page.
Select Dynamic Range using the Navigation (π,†) buttons
1, then press the Navigation (®) button 1; “ON” and “OFF’
will appear. Select ON to turn on this option or OFF to turn off
this option using the Navigation (π,†) buttons 1, then press
the NT R button 2.
OTE: This option is effective only when the soundtrack is
encoded as Dolby Digital.
1
2
1
PCM DOW SAMPLI G
Use this option to turn on a speaker and to set the speaker
distances from the user.
Select the Audio menu as shown on the previous page. Select
Speaker using the Navigation (π,†) buttons 1, then press
the Navigation (®) button 1; the Digital Output options will
appear. Select one of the speakers ({C} Center, {L/R}
Left/Right, {SL/SR} Surround Left/Surround Right, {LF }
Lower Frequency ffect) using the Navigation (π,†)
buttons 1, then press the NT R button 2to select. Press
NT R button again to disable this function or use
Navigation (π,†) buttons 1to highlight different speaker
setting option. Adjust the distance from the desired seating
area using the Navigation (√,®) buttons 1. When done,
press the R TURN button 3.
1
2
3
1
SPEAKER
DY AMIC COMPRESSIO
OTES:
•Press the S TUP button to exit the Setup menus.
• Press the R TURN button to return to the previous setting.
General
Video
Audio
Language
Parental
Digital Output
PCMDown Sampling
DynamicCompression
Speaker
Select the digitalaudio outputconrector
General
Video
Language
Parental
AudioAudio