Memorex MVD-2037 O/M.QXD User manual

Before operating this product,
please read these instructions completely.
User’s Guide
DVD/VCD/MP3/PHOTO CD Player
MVD2037

Contents..................................................................1
Important Safety Instructions ...............................2
Precautions.............................................................5
Power Source .........................................................5
Location of Controls ..............................................6
• Front....................................................................6
• Rear ....................................................................6
• Remote ...............................................................7
Remote Control ......................................................8
•Battery Installation ..............................................8
•Effective Distance of the Remote
Control Transmitter .............................................8
Connection..............................................................9
•Connecting the DVD to a TV Using the
Audio/Video Output Jacks ..................................9
•Connecting the DVD to a TV Using the
S-Video Output Jack...........................................9
•Connecting the DVD to a TV Using the
Y/PB/PRJacks ..................................................10
•Progressive (Y, PB, PR) VIDEO OUT ...............10
•525 Line Digital Progressive-scan Component
Video Output .....................................................10
•Connecting the DVD to a Home
Theatre System.................................................11
About Discs ..........................................................12
Setup Menu ...........................................................14
•General Setup Menu.........................................15
•Speaker Setup Menu ........................................16
•Dolby Digital Setup Menu .................................17
•Preferences Menu.............................................17
Basic Operation....................................................20
•3D Sound..........................................................20
•Audio Mode.......................................................20
• Mute ..................................................................20
• Display ..............................................................20
DVD Basic Operation ...........................................21
•Playback of a DVD............................................21
• Skip ...................................................................22
• Search...............................................................22
•Slow/R and Slow/F ...........................................22
• Pause/Step .......................................................22
•Title/Chapter Search .........................................23
•Title/Time Search ..............................................23
•Repeat Playback...............................................23
•A-B Playback ....................................................23
•Audio Menu.......................................................24
•Subtitle Menu....................................................24
• DVD Menu ........................................................24
•Title Menu .........................................................24
• Zoom.................................................................24
• Angle.................................................................24
MP3 BASIC OPERATION .....................................25
•Playback of an MP3..........................................25
•Selecting Folders/Tracks using the SKIP
Buttons..............................................................26
•Selecting Folders/Tracks using the
Number Buttons................................................26
• Forward/Reverse ..............................................26
•Repeat Play ......................................................26
•MP3 FAQs.........................................................26
CD/VCD BASIC OPERATION ...............................27
•Playback of a CD/VCD .....................................27
•Selecting Tracks/Files using the
Number Buttons................................................27
•Selecting Tracks/Files using the SKIP
Buttons..............................................................27
• Forward/Reverse ..............................................28
•Repeat One/All Play .........................................28
•Repeat A-B Play ...............................................28
•Random Playback.............................................28
•Programmed Playback......................................29
•PBC (VCD Only) ...............................................29
PICTURE CD BASIC OPERATION.......................30
Troubleshooting Guide ........................................31
Care and Maintenance .........................................33
Specifications .......................................................34
1
CONTENTS

2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A
LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT,
PLEASE READ THIS OWNER’S MANUAL CAREFULLY
AND RETAIN FOR FUTURE REFERENCE. SHOULD
THE UNIT REQUIRE MAINTENANCE, CONTACT AN
AUTHORIZED SERVICE LOCATION-SEE SERVICE
PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM,
DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE
LASER RADIATION MAY BE PRESENT WHEN THE
ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.
FCC NOTICE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
receiver.
•Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV
technician for help.
FCC CAUTION:
To assure continued compliance, follow the attached
installation instructions and use only shielded cables
when connecting to other devices. Also, any changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s authority
to operate the equipment.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC
connection. Lightning and power surges ARE NOT
covered under warranty for this product.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

3
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product's manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water-for example: near a bathtub, washbowl, kitchen sink, or laundry tub;
in a wet basement; or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
13. LIGHTNING
To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

  
    !
IMPORTANT:
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS
PRODUCT TO YOUR PLACE OF PURCHASE OR TO MEMOREX.

should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70,
provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to
grounding electrodes, and requirements for grounding electrode.
18. SERVICING
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance-this indicates a need for service.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
4
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

 


 
  
 
  
 
  
 
    
    






EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE

5
PRECAUTIONS
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V,
60Hz.
NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut
the wide blade. It is the user’s responsibility to have an electrician replace the obsolete
outlet.
AC Plug
AC Outlet
NOTES ON HANDLING:
•When shipping the DVD player, always use the
original shipping carton and packing materials. For
maximum protection, repack the unit as it was
originally packed at the factory.
•Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic
products in contact with the DVD player for a long
time. They will leave marks on the finish.
•The top and rear panels of the DVD player may
become warm after a long period of use. This is
normal and not a malfunction.
•When the DVD player is not in use, be sure to remove
the disc and turn off the power.
•If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
NOTES ON LOCATING THE DVD PLAYER:
•When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the DVD
player away from the TV, radio, or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
•For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzine, as they may damage the surface of the
DVD player.
•If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Warning: Cleaning and adjustment of lenses and/or
other components of playback mechanism should be
performed by a qualified service technician.
NOTES ON MOISTURE CONDENSATION:
Moisture condensation damages the DVD player.
Please read the following carefully.
• Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens inside
this unit, one of the most crucial internal parts of the DVD
player.
Moisture Condensation occurs during the following
cases:
•When you bring the DVD player directly from a cold
place to a warm place.
•When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit.
•In summer, when you use the DVD player in a hot and
humid place just after you moved the unit from an air
conditioned room.
•When you use the DVD player in a humid place.
Do not use the DVD player when moisture
condensation may occur.
• If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it “ON” for two
or three hours. After two or three hours, the DVD player
will have warmed up and evaporated any moisture. Keep
the DVD player connected to the wall outlet and moisture
condensation will seldom occur.
TO OBTAIN A CLEAR PICTURE:
The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain a
clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every 1,000
hours of use depending on the operating environment.
For details, contact your nearest dealer.

1. Power ON Backlight
2. STANDBY Indicator
3. STANDBY Button
4. Disc Tray
5. OPEN/CLOSE Button
6. Remote Sensor
7. SKIP ( ) and ( ) Buttons
8. PAUSE ( ) Button
9. Display
10. STOP (■) Button
11. PLAY () Button
6
LOCATION OF CONTROLS
FRONT
32 41 17 8 9 10 115 6
1. Stereo Audio Left/Right Output Jacks
2. Video Output Jack
3. S-Video Output Jack
4. Coaxial Digital Audio Output Jack
5. Component Video (Y, PB, PR) Output Jacks
6. PROGRESSIVE SCAN ON/OFF Switch
7. AC Power Cord
REAR
1 2 3 4 65 7

7
LOCATION OF CONTROLS (CONTINUED)
1. DISPLAY Button
2. MUTE Button
3. REPEAT Button
4. RANDOM Button
5. SLOW/F Button
6. SLOW/R Button
7. PLAY () Button
8. PAUSE/STEP Button
9. SKIP ( ) Button
10. Navigation () Button
11. ENTER Button
12. Navigation (¥) Button
13. Navigation () Button
14. RETURN Button
15. TITLE MENU Button
16. DVD MENU Button
17. ANGLE Button
18. 3D Button
19. PBC Button
20. SEARCH Button
21. Number (0–9) Buttons
22. OPEN/CLOSE Button
23. STANDBY ON/OFF Button
24. Repeat A-B Button
25. PROGRAM Button
26. SEARCH ¥¥Button
27. SEARCH Button
28. STOP (■) Button
29. SKIP ( ) Button
30. Navigation () Button
31. SETUP Button
32. SUBTITLE MENU Button
33. AUDIO MENU Button
34. ZOOM Button
35. AUDIO MODE Button
36. CLEAR Button
REMOTE
1
2
3
4
5
6
7
8
15
16
17
18 3
4
35
32
33
26
2
7
2
4
25
22
23
36
31
30
29
28
19
20
21
10
11
12
13
14
9

8
REMOTE CONTROL
BATTERY INSTALLATION
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
45 45
20ft
NOTES:
•When there is an obstacle
between the DVD and the
transmitter, the transmitter may
not operate.
•When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the REMOTE
SENSOR of the DVD, the
remote operation may be
unstable.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
+
+
–
–
1. Open the battery compartment cover by pushing in on the tab and
lifting it out.
2. Install two (2) “AA” batteries (not included), paying attention to the
polarity diagram in the battery compartment.
3. Replace the battery compartment cover.

9
CONNECTION
CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
Audio Cable (Included)
Video Cable (Included)
From
Video Out
From
Audio
Out
To
Audio In
To
Video In
CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK
Audio Cable (Included)
S-Video Cable (Not Included)
From
S-Video
Out
From
Audio
Out
To
Audio In To S-Video In
NOTES FOR CONNECTING TO A TV:
•If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
•Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
•When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
•When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
•If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
•Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
•Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.
•After connecting, press the AUDIO MODE button to the desired audio setting. (Please refer to ‘AUDIO MODE’ on page
20.)

10
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A TV USING THE Y/PB/PRJACKS
PROGRESSIVE (Y, PB, PR) VIDEO OUT:
Use these jacks to connect to a TV with progressive video input jacks, set the PROGRESSIVE SCAN switch to ON.
Progressive scan is a video scanning system that displays all lines in a frame in one pass, as opposed to the traditional
system, interlaced scan. This connection provides optimum quality. To ensure maximum picture quality, use three video-
grade cables for connections. Note that it is essential to match the color-coded connectors with a compatible TV.
525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO OUTPUT
Compared to standard interlaced video, progressive scan effectively doubles the amount of video information fed to your TV
or monitor. The result is a stable, flicker-free image. (Check your TV/monitor for compatibility with this feature.)
For the very highest picture quality, try watching a movie on DVD-Video on a progressive-scan compatible TV.
NOTES:
•If you connect a TV that is not compatible with a progressive scan signal and set the PROGRESSIVE SCAN switch is
in the ON position, you will not be able to see any picture at all. To regain the picture, you must shut the unit off and set
the PROGRESSIVE SCAN switch to the OFF position. Then, turn the unit on and the picture will appear.
•CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SET THE PROGRESSIVE
SCAN SWITCH TO “OFF”.
Audio Cable (Included) Component Cable
(Not Included)
From
Component
Video Out
From
Audio
Out
To
Audio In
To
Component
Video In
Y
PB
PR
NOTES FOR CONNECTING TO A TV:
•TV must have Y, PBand PRinput jacks.
•Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
•Set the VIDEO OUT Option (on the GENERAL Menu Page) to YUV if using the component Video Out jacks.
•When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
•When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any
connections.
•Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
•If using a TV with a blue screen option, turn the option off, on the TV for best results.

11
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A HOME THEATRE SYSTEM
13
2
9
5
4
6
78
Coaxial Cable (Not Included)
To Digital
Audio Input
From
Digital Out
From
Video Out
To Video
Input
Video Cable (Included)
NOTES FOR CONNECTING TO A TV:
•If your TV has a Component input, connect the DVD player with the component cable for best results, otherwise use the
S-Video or Video Out jack on the DVD player.
•Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
•When connecting the DVD, refer to the owner’s manual for the TV and the audio system, as well as this manual.
•When connecting, make sure the power is off and all units are unplugged before making any connections.
•Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
•If using a TV with a blue screen option, turn the option off, on the TV for best results.
•If you place the DVD player near a tuner, the radio broadcast sound might be distorted. In this case, move the DVD
player away from the tuner.
•After connecting, press the AUDIO MODE button to the desired audio setting. (Please refer to ‘AUDIO MODE’ on page
20.)
Place the subwoofer, front, rear and center
speakers in locations as shown/described
here. After correctly positioning the speakers,
perform the Tone Test on the AV Amplifier and
adjust the volume controls until the desired
sound is achieved. For best results, sit in the
viewing position and have someone adjust the
volumes for you; this will enable you to set the
optimal levels.
NOTE: To avoid scratching the furniture, place
felt pads (not included) to the bottom of each
speaker.
1. Front Left Speaker
2. Television
3. Center Speaker-can be located on top or below the
Television.
4. Sub–woofer-can be located anywhere in the room.
5. Front Right Speaker
6. Viewing/Listening Position-The best listening position
is obtained by positioning the chair, sofa, etc. in the
middle of all the speakers.
7. Rear Left Speaker
8. Rear Right Speaker
9. AV Amplifier w/ Dolby Digital Decoder/DTS Decoder
NOTE:
•The rear speakers can also be located on
the side wall facing the viewing position and
each other. Make sure the viewing position
is located between the 2 speakers in this
case. Experiment to find optimal position.

12
ABOUT DISCS
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
DISC TYPES:
DVD
Data on most DVDs is divided into sections called “titles”
and then into subsections called “chapters”, each of which
is given a title or chapter number. Some features of this
DVD player will not operate with some DVD discs as they
are preset. If a function you selected does not run as
desired, refer to the manual accompanying the DVD disc.
Chapter 1
Title 1 Title 2
Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4
AUDIO CD
Data on an audio CD is divided into sections called “tracks”,
each of which is given a track number.
KODAK PICTURE CD
Data on a Kodak picture CD is usually not divided into
separate folders, they should appear in the root directory.
Track 1 Track 2 Track 5 Track 6Track 3 Track 4
IMPORTANT:
It is important that you read the manual that accompanies the DVD disc, as there are features that are
on the DVD player that cannot be used with certain DVDs. There are also extra features on the DVD
disc that are different for each DVD disc, so they are not explained in this owner’s manual.
This player conforms to the NTSC and PAL color systems. However, if you are in
the USA, leave this setting on NTSC. If incorrectly set to PAL, the TV picture will
roll vertically. In this case, simply turn the DVD off, and then back on.
The region number for this DVD Player is:
See the following page for information regarding region numbers.
1
AUDIO CDs
When playing an MP3, the total number of files will appear in the display, and the TV screen will list the folders/tracks.
MP3
MP3 is the abbreviation of “MPEG1 Audio Layer 3”. MPEG Audio is a format that compresses the audio portion only.
IMPORTANT NOTES:
Due to many variables, including recording condition, type of disc, writing software, etc., this unit does not guarantee
playback of all MP3 discs.
KODAK PICTURE CD

Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted
material without permission. DVD video discs are copy protected, and any recordings made from these
discs will be distorted. This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region Management Information that
is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to
the Region number of this DVD player, this DVD player cannot play that disc. You may not be able to
play back some DVD video discs on this player if they were purchased from outside your geographic
area or made for business purposes. When you try to play back an unauthorized disc, "Wrong Region"
appears on the TV screen.
13
ABOUT DISCS (CONTINUED)

14
SETUP MENU
The setup menu lets you customize the DVD player by allowing you to select
various language preferences, set up a parental level, turn captions and screen
saver on and off, adjust what type of television screen you have and more.
Below, find the menu, and then find the corresponding page that describes the
features of the selected menu option.
1. Press the SETUP button ❶ to enter the Setup Menu.
2. Select one of the Setup icons ( ) at the top of the screen using
the Navigation (¥,) buttons ❷, then press the Navigation () button ❷ to
select it.
3. Use the Navigation (,) buttons ❷ to select one of the setup options, then
press the Navigation () button ❷ to select it.
4. Use the Navigation (,) buttons ❷ to select the desired setting, then press
the ENTER button ❸ to make the change. Press the Navigation (¥) button ❷
repeatedly to return to the Setup icons or press the SETUP button ❶ to exit
setup.
D
o
lb
y
TV DisplayPS
TV TypeNTSC
Video Out
Angle MarkON
OSD LangENG
CaptionsOFF
Screen SaverON
Go To General Setup Page
- - General Setup Page - -
Dolby
Downmix
Go To Speaker Setup Page
- - Speaker Setup Page - -
Dolby
Dynamic
Go To Dolby Digital Page
- - Dolby Setup Page - -
Dolby
AudioENG
SubtitleENG
Disc MenuENG
Parental
Password
Default
Go To Preference Page
- - Preference Page - -
Dolby
Page 15
Page 16
Page 17
Page 15
Page 15
Page 15
Page 15
Page 16
Page 16
Page 17
Page 17
Page 18
Page 18
Page 19
Page 19
1
3
2
Exit Setup Menu
Dolby
Select the Exit icon, then press the
ENTER button to exit the Setup menu

15
SETUP MENU (CONTINUED)
PAN SCAN: Select when the unit is connected to a
conventional TV. Video material formatted in the Pan Scan style
is played back in that style (the left and right edges are cut off).
LETTER BOX: Select when the unit is connected to a
normal TV. Wide-screen images are shown on the screen
with a black band at the top or bottom.
WIDE 16:9: Select when the unit is connected to a wide-screen TV.
TV DisplayPS
TV TypeNTSC
Video Out
Angle MarkON
OSD LangENG
CaptionsOFF
Screen SaverON
Normal/PS
Normal/LB
Wide
Set TV Display Mode
- - General Setup Page - -
Dolby
1
NTSC: Select when using an NTSC TV.
PAL: Select when using a PAL TV.
IMPORTANT: In the USA, the standard is NTSC. When the
DVD player is turned on, it will be set to NTSC.
TV DisplayPS
TV TypeNTSC
Video Out
Angle MarkON
OSD LangENG
CaptionsOFF
Screen SaverON
NTSC
PAL
Set TV Standard
- - General Setup Page - -
Dolby
1
GENERAL SETUP MENU:
Select GENERAL SETUP ( ) using the Navigation (¥,) buttons, then select/change the setup option as described on
page 14.
TV DISPLAY TV TYPE
Select the color video type to fit your connector type:
S-VIDEO: Select when using S-Video and Video Out.
YUV: Select when using Component and Video Out.
S-Video
YUV
Set Video Output
- - General Setup Page - -
Dolby
TV DisplayPS
TV TypeNTSC
Video Out
Angle MarkON
OSD LangENG
CaptionsOFF
Screen SaverON
1
The Angle mark setting will only work if this feature is included
on the DVD. Select ON, “”will appear when a scene with
different angles is playing. Select OFF to turn Angle mark off.
On
Off
Set Angle Mark
- - General Setup Page - -
Dolby
TV DisplayPS
TV TypeNTSC
Video Out
Angle MarkON
OSD LangENG
CaptionsOFF
Screen SaverON
1
VIDEO OUT (Color Video Connector Type) ANGLE MARK
Select the desired language (ENGLISH, SPANISH, GERMAN,
FRENCH) for the On-Screen display to display text. Note that
the DVD must have the language included in order to display
it.
English
Spanish
German
French
Set OSD Language
- - General Setup Page - -
Dolby
TV DisplayPS
TV TypeNTSC
Video Out
Angle MarkON
OSD LangENG
CaptionsOFF
Screen SaverON
1
OSD LANGUAGE

16
SETUP MENU (CONTINUED)
When this option is set to ON, captions will appear on the
screen for the hearing impaired.
When this option is set to OFF, captions will NOT appear on
the screen.
On
Off
Closed Caption
- - General Setup Page - -
Dolby
TV DisplayPS
TV TypeNTSC
Video Out
Angle MarkON
OSD LangENG
CaptionsOFF
Screen SaverON
1
When this option is set to ON, the screen saver will come on
when the unit stops or the image is paused for
approximately one minute.
When this option is OFF, the screen saver will not come on.
On
Off
Screen Saver
- - General Setup Page - -
Dolby
TV DisplayPS
TV TypeNTSC
Video Out
Angle MarkON
OSD LangENG
CaptionsOFF
Screen SaverON
1
CAPTIONS SCREEN SAVER
LT/RT: Select to hear the sound in theatrical downmix
mode.
STEREO: Select to hear the sound in Stereo downmix
mode.
Set Downmix Mode
- - Speaker Setup Page - -
Dolby
LT/RT
Stereo
Downmix
1
SPEAKER SETUP MENU
Select SPEAKER SETUP ( ) using the Navigation (¥,) buttons, then select/change the setup option as described on
page 14.
DOWNMIX
Sets the Audio Output mode.

17
SETUP MENU (CONTINUED)
Use to slider to set the Dynamic Range. Set to OFF to turn
Dynamic Range Off.
Dynamic Range Compression
- - Dolby Setup Page - -
Dolby
FULL
3/4
1/2
1/4
OFF
Dynamic
1
DOLBY DIGITAL SETUP MENU:
Select DOLBY DIGITAL SETUP ( ) using the Navigation (¥,) buttons, then select/change the setup option as described
on page 14.
D
o
lb
y
DYNAMIC MODE
Select the language the DVD will be played back in
(ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE).
The DVD must be recorded in the selected language,
otherwise the default language of the DVD will be played.
Preferred Audio Language
- - Preference Page - -
Dolby
English
French
Spanish
German
Japanese
AudioENG
SubtitleENG
Disc MenuENG
Parental
Password
Default
1
Select the language the Subtitle (OSD) will be in (ENGLISH,
FRENCH, SPANISH, GERMAN, JAPANESE). The DVD
must be recorded in the selected language, otherwise the
default language of the DVD will be shown.
Preferred Subtitle Language
- - Preference Page - -
Dolby
English
French
Spanish
German
Japanese
Off
AudioENG
SubtitleENG
Disc MenuENG
Parental
Password
Default
1
PREFERENCE SETUP MENU (this menu cannot be accessed if a disc is inserted):
Select PREFERENCES SETUP ( ) using the Navigation (¥,) buttons, then select/change the setup option as described
on page 14.
Dolby
AUDIO SUBTITLE

18
SETUP MENU (CONTINUED)
Select the language the DISC MENU will be in (ENGLISH,
FRENCH, SPANISH, GERMAN, JAPANESE). The DVD’s
DISC MENU must be made in the selected language,
otherwise the default language of the DVD will be shown.
Preferred Menu Language
- - Preference Page - -
Dolby
English
French
Spanish
German
Japanese
AudioENG
SubtitleENG
Disc MenuENG
Parental
Password
Default
1
DISC MENU
At the SETUP MENU, use the Navigation (,) buttons ❶
to select PARENTAL. Press the button ❷ followed by the
(,) buttons ❶ to select the desired rating.
Set Parental Control
- - Preference Page - -
Dolby
1 KID SAF
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC17
8 ADULT
Audio ENG
Subtitle ENG
Disc Menu ENG
Parental
Password
Default
1
Press the ENTER button ❶to select the rating. Input your
password using the Number buttons ❷(see note below),
then press the ENTER button ❶again. The desired rating
will then be set, and if DVDs with this new rating or above
are played, the user will require a password.
If an incorrect password is entered, “Old password error” will
appear and you will need to enter the password again.
If you forget your password, contact customer service at the
number listed in the Warranty.
Dolby
Password
Please Enter Old Password
OK
2
PARENTAL
The Parental option enables parents to prevent their children from watching inappropriate material on a DVD. It reads the
ratings for programming, then denies access to programming if the program’s rating meets the limitations you select. In this
case, the user will have to enter a password.
1 (KID SAF): Kid Safe.
2 (G): All ages.
3 (PG): Parental
Guidance.
4 (PG13): Parental
Guidance less
than 13 years old.
5 (PGR): Under 17 years
old, Parental
Guidance
suggested.
6 (R): Under 17 years
old, Parental
Guidance
strongly
suggested.
7 (NC17): 17 years old
and above.
8 (ADULT):Adult only.
1
2
1
1
2
NOTE: The default password is 1234.

19
SETUP MENU (CONTINUED)
At the SETUP MENU, use the Navigation (,) buttons ❶
to select PASSWORD. Press the button ❷ to select
CHANGE.
Set Password
- - Preference Page - -
Dolby
Change
AudioENG
SubtitleENG
Disc MenuENG
Parental
Password
Default
1
Press the ENTER button ❶to select Change the Password.
Input your old password (see note on the bottom of page
18), then the new password and then confirm the new
password using the Number buttons ❷, then press the
ENTER button ❶again. The desired new password will then
be set, be sure to write it down for future reference.
NOTE: If you input a wrong old password, "Old Password
Error" will appear on the TV screen. In this case, you need
to input the old password again. If you input a wrong
confirm password, "Confirm Password Error" will show on
the TV screen. In this case, you need to input the confirm
password again.
Dolby
Old Password
New Password
Confirm PWD
OK
Please Enter Old Password
2
PASSWORD
Select this option to change the password. You must know the old password in order to change it. If you have forgotten the
password, call customer service at the number listed in the Warranty.
At the SETUP MENU, use the Navigation (,) buttons ❶
to select DEFAULT. Press the button ❷ to select RESET.
Load Factory Setting
- - Preference Page - -
Dolby
Reset
AudioENG
SubtitleENG
Disc MenuENG
Parental
Password
Default
1
Press the ENTER button to reset the preferences to their
factory preset settings.
2
DEFAULT
Select this option to reset all the preferences (except PASSWORD) to their original factory settings. This is useful to reset
the NTSC System.
1
2
1
1
2
1
1
2