Memorex MVD1402 User manual

Before operating this product,
please read these instructions completely.
User’s Guide
14" COLOR TV WITH DVD PLAYER
MVD1402

Contents......................................................................1
Important Safety Instructions ...................................2
Precautions.................................................................5
Power Source .............................................................5
Location of Controls ..................................................6
• Front .......................................................................6
• Rear Panel..............................................................6
• Remote ...................................................................7
Remote Control ..........................................................8
• Battery Installation ..................................................8
• Effective Distance of the Remote
Control Transmitter .................................................8
Antenna Connections ................................................9
Connection Using the Front A/V In Jacks ...............9
Cable (CATV)/Satellite Connections.......................10
Connection from an External Unit ..........................11
• Connection Using Coaxial Cable..........................11
• Connection Using A/V Cables...............................11
• Connection Using the Component Y/PB/PR
Jacks.....................................................................12
Connection to an External Unit ..............................12
• Connection Using the A/V Out Jacks ...................12
• Connection Using the Coaxial Jack......................13
About Discs ..............................................................14
Setting the TV Menus...............................................16
• Video Setup Menu................................................16
•Audio Setup Menu................................................16
• Timer Setup Menu ................................................17
• Setting the On Timer ............................................18
• Setting the Off Timer.............................................19
• Setting the Sleep Timer ........................................19
• Setting the Remind Timer.....................................20
• Setup Menu ..........................................................21
• Channel Setup Menu............................................24
• Setting Channels into Memory .............................25
•Adding and Deleting Channels.............................26
• Calendar Setup Menu...........................................27
TV Parental Control..................................................28
• Parental Control Setup .........................................28
• TV Rating Setup ...................................................29
• MPAA Rating Setup ..............................................30
•Lock Menu ............................................................31
DVD Setup Menus ....................................................32
•General Setup Menu ............................................32
• Parental ................................................................33
Basic Operation........................................................34
• Display..................................................................34
• Mute......................................................................34
• TV/AV....................................................................34
• TV/DVD.................................................................34
• P. STD (Picture Standard) ....................................34
• Headphone Jack...................................................34
• Calendar ...............................................................35
• Time......................................................................35
• Volume Buttons ....................................................35
TV Basic Operation ..................................................36
• Scan......................................................................37
• Recall....................................................................37
Closed Captions.......................................................38
DVD Basic Operation ...............................................39
• Audio Mode ..........................................................39
• DVD Call Button ...................................................39
• Mute......................................................................39
• Playback of a DVD ...............................................40
• Skip.......................................................................41
• Fast Search ..........................................................41
• Slow......................................................................41
• Pause/Step ...........................................................41
• Title/Chapter Search.............................................42
• Title/Chapter/Time Search....................................42
• Repeat Playback ..................................................42
• A-B Repeat Playback ...........................................42
• Audio Language ...................................................43
• Subtitle Menu........................................................43
• DVD Menu ............................................................43
• Title Menu.............................................................43
•Zoom In ................................................................43
• Angle.....................................................................43
• Programmed Playback .........................................44
CD/VCD BASIC OPERATION ...................................45
•Playback of a CD/VCD .........................................45
• Selecting tracks using the Skip (n)or (o)
Button (For VCD ONLY) .......................................45
• Selecting track using the Number Buttons ...........45
• Selecting Tracks Using The Navigation
Buttons (For CD ONLY) .......................................45
• Forward/Reverse ..................................................46
•Play a Single Track/Repeat Play..........................46
• Repeat A-B Play ...................................................46
• PBC (VCD Only)...................................................46
• Audio.....................................................................46
•Programmed Playback(VCD Only).......................47
PICTURE CD BASIC OPERATION...........................48
Troubleshooting Guide............................................49
Care and Maintenance .............................................51
Specifications ...........................................................52
1
CONTENTS

2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A
LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT,
PLEASE READ THIS OWNER’S MANUAL CAREFULLY
AND RETAIN FOR FUTURE REFERENCE. SHOULD
THE UNIT REQUIRE MAINTENANCE, CONTACT AN
AUTHORIZED SERVICE LOCATION-SEE SERVICE
PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM,
DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE
LASER RADIATION MAY BE PRESENT WHEN THE
ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.
FCC NOTICE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC WARNING:
To assure continued compliance, follow the attached
installation instructions and use only shielded cables
when connecting to other devices. Modifications not
authorized by the manufacturer may void user’s authority
to operate this device.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC
connection. Lightning and power surges ARE NOT
covered under warranty for this product.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
DANGER:
Invisible and hazardous laser radiation when
open and interlock failed or defeated. Avoid
direct exposure to beam.
The symbol for class II
(Double Insulation)
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISES ET POUSSER
JUSQU’AU FOND.
This Caution Marking was located at the rear enclosure of
the apparatus.

3
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth
for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product's manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water–for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force and
uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of
the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company. For products intended to
operate from battery power,or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
13. LIGHTNING
To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
S3126A
PORTABLE CART WARNING
(symbol provided by RETAC)

17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70,
provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to
grounding electrodes and requirements for grounding electrodes.
18. SERVICING
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance–this indicates a need for service.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
4
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
S2898A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE

5
PRECAUTIONS
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V,
60Hz.
NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut
the wide blade. It is the user’s responsibility to have an electrician replace the obsolete
outlet.
AC Plug
AC Outlet
NOTES ON HANDLING:
• When shipping this unit, always use the original
shipping carton and packing materials. For maximum
protection, repack the unit as it was originally packed
at the factory.
• Do not use volatile liquids, such as insect spray, near
the player. Do not leave rubber or plastic products in
contact with the DVD player for a long time. They will
leave marks on the finish.
• The top and rear panels of the player may become
warm after a long period of use. This is normal and
not a malfunction.
• When the player is not in use, be sure to remove the
disc and turn off the power.
• If you do not use the player for a long period, the unit
may not function properly in the future. Turn on and
use the player occasionally.
NOTES ON LOCATING THE DVD PLAYER:
• When you place this player near another TV, radio or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the player
away from the TV, radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzene, as they may damage the surface of the
player.
•If you use a chemical-saturated cloth to clean the unit,
follow that product’s instructions.
Warning: Cleaning and adjustment of lenses and/or
other components of playback mechanism should be
performed by a qualified service technician.
NOTES ON MOISTURE CONDENSATION:
Moisture condensation damages the DVD player. Please
read the following carefully.
• Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens inside
this unit, one of the most crucial internal parts of the DVD
player.
Moisture condensation occurs during the following
cases:
• When you bring the DVD player directly from a cold place
to a warm place.
•When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit.
•In summer,when you use the DVD player in a hot and
humid place just after you moved the unit from an air
conditioned room.
•When you use the DVD player in a humid place.
Do not use the DVD player when moisture condensation
may occur.
• If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it “ON” for two
or three hours. After two or three hours, the DVD player
will have warmed up and evaporated any moisture. Keep
the DVD player connected to the wall outlet and moisture
condensation will seldom occur.
TO OBTAIN A CLEAR PICTURE:
The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain a
clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every 1,000
hours of use depending on the operating environment.
For details, contact your nearest dealer.

1 432 5 6 7
FRONT
1. TV/DVD Button
2. Channel +/– Buttons
3. Volume +/– Buttons
4. STOP Button
5. DVD Tray OPEN/
CLOSE Button
6. MENU Button
7. PLAY Button
8. Disc Tray
9. Remote Sensor
10. AUDIO 1 Right IN
Jack
11. AUDIO 1 Left
(Mono) IN Jack
12. VIDEO 1 IN Jack
13. Headphone Jack
14. POWER Button
15. POWER Indicator
REAR
1. COAXIAL Output
Jack
2. COMPONENT IN
Jacks (Y/CB/CR)
3. VIDEO Output Jack
4. VIDEO 2 IN Jack
5. Stereo AUDIO 2
Left/Right IN Jacks
6. AUDIO OUT Jacks
7. TV Antenna Jack
6
LOCATION OF CONTROLS
FRONT
321 4 5 6 7 8 9 1110 1213 14 15
REAR PANEL

7
LOCATION OF CONTROLS (CONTINUED)
1. POWER Button
2. SCAN Button
3. RECALL Button
4. Direct Channel Selection/Number (0-9)
buttons
5. Not Used
6. Channel + Button
7. Volume – Button
8. MENU Button
9. EXIT Button
10. CALENDAR Button
11. TIME Button
12. REV √
√√ √Button
13. FWD ®
®® ®Button
14. STOP (■
■) Button
15. SETUP Button
16. D. MENU (DVD Menu) Button
17. Navigation (√,®
®,π π,† †) Buttons
18. PLAY/ENTER Button
19. ANGLE Button
20. AUDIO Button
21. PROGRAM Button
22. DVD CALL Button
23. SUBTITLE Button
24. DVD Tray OPEN/CLOSE Button
25. MUTE Button
26. DISPLAY Button
27. TV/AV Button
28. -/-- Button
29. TV/DVD Button
30. Volume + Button
31. Channel – Button
32. P. STD (Picture) Button
33. CCD Button
34. Not Used
35. SKIP (n) Button
36. SKIP (o ) Button
37. 10+ Button
38. PAUSE/STEP Button
39. Repeat A-B Button
40. REPEAT Button
41. SLOW Button
42. SEARCH Button
43. TITLE/PBC Button
44. ZOOM Button
REMOTE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
NOTE: When setting the TV Menus, the Channel +/- buttons are used as
Navigation UP/DOWN and the Volume +/- buttons are used as Navigation
Right/Left..

8
REMOTE CONTROL
BATTERY INSTALLATION
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
30 30 20ft
NOTES:
• When there is an obstacle
between the unit and the
transmitter, the transmitter may
not operate.
•When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the REMOTE
SENSOR of the unit, the
remote operation may be
unstable.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
1. Remove the battery compartment cover by pushing in on the tab and
lifting the compartment off.
2. Install two (2) “AAA” batteries (not included), paying attention to the
polarity diagram in the battery compartment.
3. Replace the battery compartment cover.

9
ANTENNA CONNECTIONS
OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED)
Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see the next page.
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin-lead wire)
Separate VHF/UHF Antennas
Combination VHF/UHF
Antenna (Separate VHF and
UHF 300 ohm twin-leads)
Connect the UHF twin-lead wire to a
combiner (NOT SUPPLIED). Connect
the VHF twin-lead to a 300-75 ohm
matching transformer (NOT SUPPLIED).
Attach the transformer to the combiner.
Attach the combiner to the antenna jack.
Connect the 75 ohm cable from the VHF
antenna and the UHF antenna twin-lead
wire to a combiner (NOT SUPPLIED).
Attach the combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-
lead wire, use a 300-75 ohm matching
transformer, then connect the
transformer to the combiner.
Connect the 75 ohm cable from
combination VHF/UHF antenna to the
antenna jack.
OR
If your combination antenna has a 300
ohm twin-lead wire, use a 300-75 ohm
matching transformer (NOT SUPPLIED).
CONNECTION USING THE FRONT AUDIO/VIDEO IN JACKS
The optimal use for the front A/V jacks are to connect an A/V component that is used only occasionally, such as a
camcorder or video game. Connect the Audio/Video output jacks of the external unit to the Audio Input jacks and the Video
Input jack.
To access the unit connected to
these jacks, press the TV/AV
button so VIDEO1 appears on
the screen. To resume normal
TV viewing, simply press the
TV/AV button again.
AUDIO/VIDEO Cord (Not Supplied)
EXTERNAL SOURCE
(i.e. camcorder, video game)
FAQs:
My external unit has only 1 audio jack, but this unit has two Audio Input jacks, how do I connect it?
Simply connect it to the “L (Mono)” Audio Input jack, but the sound will be monaural.
How do I watch the external unit connected to the Audio/Video Input jacks?
Press the TV/AV button so VIDEO1 appears on the screen, then start the external source.
Are the cables included?
No, the cables are sold separately, visit your local electronics store.

10
CABLE (CATV)/SATELLITE CONNECTIONS
This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some
Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal
viewing requires the use of a descrambler device which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a converter/descrambler box,
connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the
rear of the TV.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE
If you subscribe to a satellite service or a cable TV service which requires the use of a converter/descrambler box, connect
the incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm cable, connect the output of
the converter/descrambler or satellite box to the antenna jack on the TV. Follow the connections shown below. Set the
TV/VCR to the output channel of the converter/descrambler or satellite box (usually 3 or 4) and use the
converter/descrambler or satellite box to select channels.
INCOMING
75 OHM
CATV CABLE
SPLITTER A/B SWITCH
75 OHM
CABLE
CONVERTER/
DESCRAMBLER
CONVERTER/
DESCRAMBLER OR
SATELLITE BOX 75 OHM CABLE
TO TV/VCR
INCOMING
75 OHM
CATV CABLE
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED
PREMIUM CHANNELS
If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and premium channels
require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the
cable company or an electronic supply store). Follow the connections shown below. With the switch in the “B” position, you can
directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the
converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.
FAQ:
I connected my cable, but why can’t I get channels above 69?
Make sure the AIR/CABLE option is set to CABLE, see page 25. Also, make sure your cable company broadcasts
channels in the range you are searching.

11
CONNECTION FROM AN EXTERNAL UNIT
CONNECTION USING COAXIAL CABLE:
Follow the instructions below to connect an external unit, such as a VCR, to your unit using a 75 ohm coaxial cable. (CABLES
NOT INCLUDED.)
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the external unit.
2. Connect a 75 ohm coaxial cable from the external unit’s 75 ohm OUT jack to the TV Antenna jack on the rear of the unit.
3. Press the TV/AV button until regular TV or CATV appears on the TV screen and press PLAY on the external unit to view.
NOTE: If you are in the inner DVD mode, press the TV/DVD button to change to TV/AV mode first.
VCR
INCOMING CATV CABLE
From VCR OUT jack
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect the left and right audio cables from the external unit’s Audio OUT jacks to this unit’s AUDIO 2 IN jacks.
Connect the external unit’s Video OUT jack to this unit’s VIDEO 2 IN jack.
3. Press the TV/AV button until VIDEO2 appears on the TV screen.
NOTE: If you are in the inner DVD mode, press the TV/DVD button to change to TV/AV mode first.
VCR/DVD
AUDIO/VIDEO Cord
From VCR OUT jacks
INCOMING CATV
CABLE (VCR)
CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect an external unit, such as a VCR or a second DVD player, to your unit using
Audio/Video cables. (CABLES NOT INCLUDED.)
VCR
VCR (or second DVD)

12
CONNECTION USING THE COMPONENT Y/CB/CR JACKS
1. Connect the cable, satellite or incoming antenna
to the VHF/UHF IN jack on the rear of the
external unit, such as a VCR or a second DVD
player.
2. Connect the left and right audio cable from the
external unit’s Audio OUT jacks to this unit’s
AUDIO 2 IN jacks.
3. Connect the external unit’s Component Video
OUT jacks to this unit’s COMPONENT IN Jacks
(Y/CB/CR).
4. Press the TV/AV button until DVD appears on
the TV screen.
NOTE: Connect the DVD player to this unit with the
component in jacks for best results, otherwise use
the Video 2 in jack.
CONNECTION FROM AN EXTERNAL UNIT (CONTINUED)
CONNECTION TO AN EXTERNAL UNIT
CONNECTION USING THE AUDIO/VIDEO OUT JACKS:
Follow the instructions below to connect an external audio and video unit. This will output the sound from the unit into the
external audio unit’s speakers.
1. Connect the left and right audio cable from the Amplifier’s Audio IN jacks to this unit’s AUDIO OUT jacks.
2. If desired, connect an external unit’s video IN jack to this unit’s VIDEO OUT jack.
VCR (or second DVD)

13
CONNECTION TO AN EXTERNAL UNIT (CONTINUED)
CONNECTION USING THE COAXIAL JACK
13
2
9
5
4
6
78
Coaxial Cable
To Digital
Audio Input
From
Digital Out
From
Video Out
NOTES FOR CONNECTING TO A SUBWOOFER:
•When connecting, make sure the power is off and all units are unplugged before making any connections.
Place the subwoofer, front, rear and center
speakers in locations as shown/described
here. After correctly positioning the speakers,
perform the Tone Test on the AV Amplifier and
adjust the volume controls until the desired
sound is achieved. For best results, sit in the
viewing position and have someone adjust the
volumes for you; this will enable you to set the
optimal levels.
1. Front Left Speaker
2. This Unit
3. Center Speaker–can be located on top or below the
Television.
4. Sub-woofer–can be located anywhere in the room.
5. Front Right Speaker
6. Viewing/Listening Position–The best listening position
is obtained by positioning the chair, sofa, etc. in the
middle of all the speakers.
7. Rear Left Speaker
8. Rear Right Speaker
9. AV Amplifier w/Dolby Digital Decoder/DTS Decoder
NOTE:
• The rear speakers can also be located on
the side wall facing the viewing position and
each other. Make sure the viewing position
is located between the two speakers in this
case. Experiment to find optimal position.

14
ABOUT DISCS
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
DISC TYPES:
DVD
Data on most DVDs is divided into sections called “titles”
and then into subsections called “chapters”, each of which
is given a title or chapter number. Some features of this
DVD player will not operate with some DVD discs as they
are preset. If a function you selected does not run as
desired, refer to the manual accompanying the DVD disc.
AUDIO CD
Data on an audio CD is divided into sections called “tracks”,
each of which is given a track number.
KODAK PICTURE CD
Data on a Kodak picture CD is usually not divided into
separate folders, they should appear in the root directory.
IMPORTANT:
It is important that you read the manual that accompanies the DVD disc, as there are features that are
on the DVD player that cannot be used with certain DVDs. There are also extra features on the DVD
disc that are different for each DVD disc, so they are not explained in this owner’s manual.
This player conforms to the NTSC, NTSC 443 and AUTO systems. The default
setting is NTSC. However, if you are in the USA, leave this setting on NTSC.
The region number for this DVD Player is:
See the following page for information regarding region numbers.
1

Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent copyrighted
material without permission. DVD video discs are copy protected, and any recordings made from these
discs will be distorted. This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region Management Information that
is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to
the Region number of this DVD player, this DVD player cannot play that disc. You may not be able to
play back some DVD video discs on this player if they were purchased from outside your geographic
area or made for business purposes. When you try to play back an unauthorized disc, "Wrong Region"
appears on the TV screen.
15
ABOUT DISCS (CONTINUED)

16
SETTING THE TV MENUS
Press the CHANNEL Up 1 or Down 2 button until COLOR
TEMP is selected.
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Language English
Background On
Black Stretch On
VNR On
Fade Off
C. Caption CC1
Demo Mode
Setup
Channel System Auto
Air Cable Cable
Skip Off
Current Ch. 13
Fine
Auto Program
Channel
Solar 2005 6 1
s m t w t f s
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Calendar
Password - - - -
Password
Volume 10
Audio
3
1
2
Press the CHANNEL Up 1 or Down 2 button until VOLUME
is selected; volume will highlighted in red. Press the
VOLUME Up 3 or Down 4 button to set the desired volume.
PICTURE
BRIGHT 50
CONTRAST 34
COLOR 50
SHARP 50
TINT 00
CH+/CH-:SELECT
VOL+/VOL-:ADJUST
PICTURE
BRIGHT 50
CONTRAST 34
COLOR 50
SHARP 50
TINT 00
34
CH+/CH-:SELECT
VOL+/VOL-:ADJUST
34
2
1
2
3
4
Press the VOLUME Up 1 or Down 2 button to set the
desired color balance (COOL, NEUTRAL or WARM). When
done, press the MENU button 3 twice to exit the menus.
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. CoolCool
Video
4
1
2
3
NOTES:
• To exit the menus, press the EXIT button.
• Use the Volume Up/Down buttons to adjust the volume directly while in TV/AV/DVD mode.
VIDEO SETUP MENU:
Press the MENU button 1once; the Video menu will
appear. Press the VOLUME Up 2 or Down 3button to
select the Audio setting.
CLOCK
TIME 19:20
ON-TIME 12:30
OFF-TIME 21:00
ALARM --:--
BESPOKE-TIME --:--
POSITION -
CH+/CH-:SELECT
VOL+/VOL-:ADJUST
AUDIO
VOLUME 20
BALANCE 00
20
CH+/CH-:SELECT
VOL+/VOL-:ADJUST
CLOCK
TIME 19:20
ON-TIME 12:30
OFF-TIME 21:00
ALARM --:--
BESPOKE-TIME --:--
POSITION -
CH+/CH-:SELECT
VOL+/VOL-:ADJUST
AUDIO
VOLUME 20
BALANCE 00
20
CH+/CH-:SELECT
VOL+/VOL-:ADJUST
1
2
3
1
AUDIO SETUP MENU:
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Language English
Background On
Black Stretch On
VNR On
Fade Off
C. Caption CC1
Demo Mode
Setup
Channel System Auto
Air Cable Cable
Skip Off
Current Ch. 13
Fine
Auto Program
Channel
Solar 2005 6 1
s m t w t f s
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Calendar
Password - - - -
Password
Volume 10
Audio
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Language English
Background On
Black Stretch On
VNR On
Fade Off
C. Caption CC1
Demo Mode
Setup
Channel System Auto
Air Cable Cable
Skip Off
Current Ch. 13
Fine
Auto Program
Channel
Solar 2005 6 1
s m t w t f s
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Calendar
Password - - - -
Password
Volume 10
Audio
Press the MENU button 1once; the Video menu will appear.
Press the CHANNEL Up 2 or Down 3 button until the desired
picture setting is selected (PICTURE, BRIGHTNESS,
COLOR, SHARPNESS, TINT).
NOTE: Tint option is only available when in the Inner DVD
mode.
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Language English
Background On
Black Stretch On
VNR On
Fade Off
C. Caption CC1
Demo Mode
Setup
Channel System Auto
Air Cable Cable
Skip Off
Current Ch. 13
Fine
Auto Program
Channel
Solar 2005 6 1
s m t w t f s
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Calendar
Password - - - -
Password
Volume 10
Audio
1
1
2
3
Press the VOLUME Up 1 or Down 2 button to adjust the
setting.
When done, press the Menu button 3 once to return to the
Video menu.
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. CoolCool
Video
2
1
2
3
SETTING THE PICTURE

17
SETTING THE TV MENUS (CONTINUED)
Press the VOLUME Up 1 or Down 2 button to set the
current hour, then press the CHANNEL Down button 3; the
minutes will be highlighted in red.
Clock 0101:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:1313
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 1212 : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-OnTime-On 12 : 3030
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
3
1
3
1
2
Press the VOLUME Up 1 or Down 2 button to set the
current minute. When done, press the EXIT button 3to exit
the menus.
Clock 0101:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:1313
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 1212 : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-OnTime-On 12 : 3030
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
4
1
3
2
TIMER SETUP MENU (CANNOT BE USED WHEN IN DVD MODE):
While in TV/AV mode, press the MENU button 1once; the
Video menu will appear. Press the VOLUME Up 2 or Down
3button to select the Timer setting.
NOTE: You can press the TIME button 4 to directly enter to
Time Setting while in TV/AV mode.
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Language English
Background On
Black Stretch On
VNR On
Fade Off
C. Caption CC1
Demo Mode
Setup
Channel System Auto
Air Cable Cable
Skip Off
Current Ch. 13
Fine
Auto Program
Channel
Solar 2005 6 1
s m t w t f s
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Calendar
Password - - - -
Password
Volume 10
Audio
1
2
4
3
1
Press the CHANNEL Up 1 or Down 2 button until CLOCK
is selected; the hours will be highlighted in red.
NOTE: The clock is a 24 hour (military time) type clock.
Clock 0101:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:1313
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 1212 : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-OnTime-On 12 : 3030
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 55
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
2
1
2
SETTING THE CLOCK

18
SETTING THE TV MENUS (CONTINUED)
Press the VOLUME Up 1 or Down 2 button to set the
desired On hour, then press the CHANNEL Down button 3;
the minutes will be highlighted in red.
Clock 0101:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:1313
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 1212 : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-OnTime-On 12 : 3030
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 55
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
3
1
3
1
2
Press the VOLUME Up 1 or Down 2 button to set the
desired On minute.
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:1313
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 1212 : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-OnTime-On 12 : 3030
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 55
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
4
1
2
Press the CHANNEL Up 1 or Down 2 button until CH.
SELECT is selected.
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:1313
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 1212 : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-OnTime-On 12 : 3030
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 55
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
5
1
2
Press the VOLUME Up 1 or Down 2 button to set the
desired On Channel (the channel the unit will turn on to).
When done, press the EXIT button 3to exit the menus.
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:1313
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 1212 : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-OnTime-On 12 : 3030
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 55
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
6
1
3
2
Press the CHANNEL Up 1 or Down 2 button until TIME ON
is selected; the hours will be highlighted in red.
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 1212 : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-OnTime-On 12 : 3030
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 55
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
2
1
2
While in TV/AV mode, press the MENU button 1once; the
Video menu will appear. Press the VOLUME Up 2 or Down
3button to select the Timer setting.
NOTE: You can press the TIME button 4 to directly enter to
Timer Setting while in TV/AV mode.
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Language English
Background On
Black Stretch On
VNR On
Fade Off
C. Caption CC1
Demo Mode
Setup
Channel System Auto
Air Cable Cable
Skip Off
Current Ch. 13
Fine
Auto Program
Channel
Solar 2005 6 1
s m t w t f s
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Calendar
Password - - - -
Password
Volume 10
Audio
1
2
4
3
1
SETTING THE ON TIMER
NOTE:
•When the actual time matches the Timer On time, the unit will automatically turn on.

19
SETTING THE TV MENUS (CONTINUED)
Press the VOLUME Up 1 or Down 2 button to set the
desired Off hour, then press the CHANNEL Down button 3;
the minutes will be highlighted in red.
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 1212 : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-OffTime-Off 12 :4545
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep TimeSleep Time 1010
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 1616 : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 16 : 30
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time - - : - -
Ch. Switch 7
Timer
3
1
3
1
2
Press the VOLUME Up 1 or Down 2 button to set the
desired Off minute. When done, press the EXIT button 3to
exit the menus.
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 1212 : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-OffTime-Off 12 :4545
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep TimeSleep Time 1010
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 1616 : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 16 : 30
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time - - : - -
Ch. Switch 7
Timer
4
1
3
2
Press the CHANNEL Up 1 or Down 2 button until TIME
OFF is selected; the hours will be highlighted in red.
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 1212 : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-OffTime-Off 12 :4545
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep TimeSleep Time 1010
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 1616 : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 16 : 30
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time - - : - -
Ch. Switch 7
Timer
2
1
2
While in TV/AV mode, press the MENU button 1once; the
Video menu will appear. Press the VOLUME Up 2 or Down
3button to select the Timer setting.
NOTE: You can press the TIME button 4 to directly enter to
Timer Setting while in TV/AV mode.
Picture 85
Brightness 60
Color 60
Sharpness 80
Tint 0
Color Temp. Cool
Video
Clock 01:13
Time-On - - : - -
Ch. Select 1
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Language English
Background On
Black Stretch On
VNR On
Fade Off
C. Caption CC1
Demo Mode
Setup
Channel System Auto
Air Cable Cable
Skip Off
Current Ch. 13
Fine
Auto Program
Channel
Solar 2005 6 1
s m t w t f s
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Calendar
Password - - - -
Password
Volume 10
Audio
1
2
4
3
1
SETTING THE OFF TIMER
Press the VOLUME Up 1 or Down 2 button to set the desired
Sleep Time. When done, press the EXIT button 3to exit the
menus. The sleep timer will count down and when it reaches
0, the unit will turn off.
NOTE: For the Sleep Timer, you can select from 0 -180, i.e.
set to 10 for the unit turn off automatically after 10 minutes, set
to 180 to turn off the unit automatically after 180 minutes.
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 1212 : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-OffTime-Off 12 :4545
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep TimeSleep Time 1010
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 1616 : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 16 : 30
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time - - : - -
Ch. Switch 7
Timer
2
1
3
2
While in TV/AV mode, press the MENU button 1once; the
Video menu will appear. Press the VOLUME Up 2 or Down
3button to select the Timer setting. Press the CHANNEL
Up 4 or Down 5 button until SLEEP TIME is selected.
NOTE: You can press the TIME button 6 to directly enter to
Timer Setting while in TV/AV mode.
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off - - : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 1212 : - -
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-OffTime-Off 12 :4545
Sleep Time 0
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep TimeSleep Time 1010
Remind Time - - : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 1616 : - -
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time 16 : 30
Ch. Switch 1
Timer
Clock 01:13
Time-On 12 : 30
Ch. Select 5
Time-Off 12 : 45
Sleep Time 0
Remind Time - - : - -
Ch. Switch 7
Timer
1
4
5
2
1
6
3
SETTING THE SLEEP TIMER
NOTE:
• When the actual time matches the Timer Off time, the unit will automatically turn off.