Merax WF195692 User manual

ASSEMBLY INSTRUCTIONS
ITEM # : WF195692 &WF195693
1-Follow the information on the warning label appearing on the upper bunk bed
and structure on the carton ...Do not remove warning label from bed
2-Alway use the recommended size mattress or mattress support, or both,
to help prevent the likelihood of entrapment or falls.
3-Surface of mattress must be at least 5 inches below the upper edge of guard rails.
4-Do not allow children under 6 years to use the upper bunk bed.
5-Prohibit more than one person on upper bunk.
6-Periodically check and ensure that the guardrail, ladder, and other components are
in their proper position, free from damage, and that all connectors are tight.
7-Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8-Always use the ladder for entering and leaving upper bunk.
9-Do not use substitute part. Contact the manufacturer or dealer for replacement part.
10-Use of night light may provide added safety precaution for a child using the upper
bunk.
11-If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed.
12-Always use guardrail on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instruction for future reference.
15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed, for example, but not limited to hooks, belts and jump rores.
SAFETY WARNINGS
Page 1
PLEASE DO NOT RETURN PRODUCT TO THE STORE.
If you have any problem or concerns, please feel free to contact our customer
service department. We will reply you as soon as possible.
E-Mail: [email protected]
Tel: [phone] Ext.100

No.
PART LISTS
1
PHOTO Q'TYPART NAME
2
3
4
5
8
9
14
15
16
17
2pcs
Side rail (I)
Completed Twin Slats
(10pcs/1set)
Page 2
Cap for horizontal bar
2pcs
2pcs
2 pc
2pcs
2pcs
1pc
1pcs
Center horizontal bar
Bottom horizontal bar
Upper legs (I)
Upper legs (I)
Center Guardrail Support
(II)
1pc
Guardrail Support (II)
Guardrail Support (II)
10pcs
ASSEMBLY INSTRUCTIONS
ITEM # : WF195692
18
19
1pc
1pc
Ladder step 3pcs

No.
A
C
HARDWARE NAME Q'TYPHOTO
20pcs
HARDWARE LISTS
No.
PART LISTS
1
PHOTO Q'TYPART NAME
G
H
I
J
E
D
24pcs
ALLEN KEY 4mm
4pcs
1pc
6pcs
16pcs
7pcs
68pcs
2
3
6
7
10
11
12
13
16
2pcs
Completed Twin Slats
(10pcs/1set)
Wood dower Ø10 x 30mm
Page 3
Horizontal-Hole bolts
Hex-Head bolts
Hooks
Cap for horizontal bar
2pcs
2pcs
2pcs
1pc
1pc
1pc
1pc
Center horizontal bar
Bottom horizontal bar
Upper legs (II)
Upper legs (II)
Upper legs (II)
Upper legs (II)
Upper long Guard rail (II)2pcs
Upper long Guard rail (II)
10pcs
ASSEMBLY INSTRUCTIONS
ITEM # :WF195693
B4pcs
Hex-Head bolts
Hex-Head bolts
L
M
12pcs
40pcs
8pcs
Steel dower Ø10 x 90mm
N
P4pcs
4C
4D
Side rail (II)
Side rail (II)
1pc
1pc

Page 4
STEP 1: Headboard Assembly (I)
WF195692
4 PLACES
STEP 2: Headboard Assembly (I)

6 PLACES
Page 5
STEP 3:
STEP 4:
Completed Twin Slat Assembly (I)

Page 6
STEP 5: Headboard Assembly (II)
STEP 6: Headboard Assembly (II)
2 PLACES
C
B
B

Page 7
STEP 8:
STEP 7: Headboard Assembly (II) 2 PLACES
Completed Twin Slat Assembly (II)

STEP 9: Ladder (II) Assembly
19
Page 8
Ladder (I)&(II) Assembly
STEP 15:
Headboard (I)
WF195692
Headboard (II)
WF195692