Mercedes-Benz GLA-Class User manual

Installationand OperatingInstructions
of Mercedes-Benz
GLA-CIass Electric Baby Car
Mercedes-Benz
GLA-C1ass
Please read the operating instructions carefully beforeuse

Contents
I Prujuct Specifications
and
Parameters
ll. List
It'. Assembly Diagram
IV. and Replacement of
Remote Control Battenes
V. Funcoon and Operation
VI. Batteryand Charger Operating
Guide
VI'. Stmplo Fautt Rernoval Guidance
Vill. WARNING
IX. Dimensions of entire
car
ll. Components List
Car Body
4
Rear-view
mirror x2
7
10
Front axle frame connecting-rod
screw 13PM)
13
Steenng wheel
screw
(5x33PM)
16
Rear-view mirror
screw
(4 17PM)
19
MP3 connecting
22
l. Product Specifications and Parameters
1. This product is suitable for the children of 3.6 years ano
2. Product dimensions: 122 x 63.8 x 63CM
3. Product maximum load weight: 30 kg
4. Product speed: three-gear speed (load: 30kg); first
gear2.3km/h; second gear: 3.3krn/h; third
gear: 4.3krn/h
5. Product dnving motor. DC 6V/10000r (550 dual drive)
6. Product charger input AC 100-240V (50/60Hz). output
DC
7. Product rechargeable battery: DC 12V\7AH (1 piece),about
8. Remote control and manual operation switching function.
2.4G
9. Remote controlbattery:
2 X 1.5V AAA batteri
es (not
included)
10. Product operating ambient temperature:
0-40'C
23
Windshield Steering
Wheel
56Driving wheel
Wheel '2 (With
rubber
wheel ring)
89
Front axle frame
Tail wing connecting-rod
11 12
Front axle frameconnecting-rod
screw cap (M5) J-shaped stick
14 15
Seat fixing block screw Steering wheel
screw
cap (5M)
17 18
Rear-view mirror screw
cap (4mm) Rear wheel axle
20 21
gearbox screw
(3XIOPWAB)
Charger
Remote
control

mDlY
Diagram
Ron/
wheel
nubbot
•oboe"
ting
Gogtbog
Rubber
'"hool ring 18 Gearbox
lezst.an
the
front
axle frame connecting-rod (part 9) at the assigned location, and then tighten it With
shall
tho
front
axle
frame
connecting-rod
screw (part 10) and screw cap (part 11). (The tightening degree
be oased on the nonblo swing diroction.)
Use
me
thumbto press the wheels (part 5) centor button, and then put them into the front iri
sequence
Rotate
tho
motorgearbox upwards according to the direction indicatod by the arrow until tho rnofot
gearbox
holealigns withtho car body axle holo, and thon insert tho roar orlo (part 18) into tho
awgned bcation of tho car body.
use thethumb
to press the contor button of tho driving wh0019 (part 6) to pot thorn into tho roar
axle in sequence

2, Installation ot J-bhapod otic
ot tho whoolssinsen tho whoois into tho (tont axlo and tiX Insert tho J•shaped stick (part 12) into the car-front
thorn, press tho cont0f button of tho Wh0018
to pullout assiqnod qonrbox, and thon fix it with gearbox
whools 'tom tho axlo $0 as to rotoovo tho whools. scrow (part 21
J. lostallatvonofsteering
O
•ar body Pluq.i
hole
Plug the wire plug ot the steering wheol into tho
wire plug fromthe car body hole correspondingly,
and then put the connected plugs jnto tho car
body holo.
4. Installation of power supply and seat
Battery black-plug (-)
Battery
Stack cable—e od cabl
Ctrcu't board
placog box o
When the power supply is installed. insert the red
cable terminal into the battery positive pole.
Note: the red cable is connected to the battery
red-plug (+). and the black cable is connected to
the battery black-plug namely connect same
color battery cables and main distributioncables
together. and the wrong connection of different
color cables will cause short circuit.
3
13
Install the steering wheel (part 3) on the J-shaped stick.
and thon tighten it with tho steering wheel screw
(part13) and screw cap (part 15).
Handle
7
Fixing
block
After the power supply is installation. put the seat and seat
fixing block (part 7) into the buckle position holes according
to the direction indicated by the arrow. tighten itwith the
fixing block screw (pad 14). and pull the handle to push the
seat back to the original position.

of
rear
wing. windshietd and rear-view mirror
Insert
the
rear
wing (port 8) into the
corresponding
hole
position and tighten it
aoding to
the
direction indicated by the
anow
Assembly
completion drawing
16
Install the windshield (part 2) and rear-vtew mtrror (part 4) at
the assigned location
or the car front
end, find each bucklo
position before installation, pross it forcefully until each
buckle position is tight. and tighten tho rear-view mirror with
the screw (part 16) and screw cap (part 17).
IV.
Installation
and replacement of remote control batteries
2.4G
remote
control Battery Cover
2x1.5V AAA
batteries
The fixing glue meson
on the screw can
prevontthe screw Batte
from dropping out Compartment
Unscrew the battery
cover screws of the remote control (part 22), open the battery cover, find the positive and
negativepoles, put
AAA batteries into the battery
compartment, close the battery cover and fix it with screws.
V. Function
and Operation
1. Mainfunctions:
1) Remote controland foot-tread change-over switch
2) Postpositiondual drive: Two 6V/10000r (550) motorgearboxes can provide the strong "frontor reaff
power.
3)Forward/backwardfunction: The right side of the dashboard is provided with the three fonvard gears
forspeedregulation,neutralgear and reversegear (each gear has LED lamp display function.)

4) Foot-tread
drivingfunction When tho lover is jn a forward
or bauward cute. tro car can rrO•'0
backward if tno footswitch stepped. and the car will stop runn•ng
if tne i'
5) Charging protection
tuncoon;All functions
needing to bo powered
by tr• battery
6) Forward/backward
brake function,No matterwhat the forward
or backward operated, tr•.erø
totay brake functvon
during stop.
b) Turn out the auxiliary car-pulling wheel at the car tail bottom.
and then turn out the handle at the
bottom so as to putl tho car.
2. Functions of dashboard and steering wheor the a
1) Man power switch: Press the main power switch so that the pooer lamp is on and
standby state. Press it again to stop the motor
2) Front lamp switch: the lower stage is off for all lampo•.
the middle stage js on tor 'Oft,tngnt
doooraqvø
the upper stage IS on for front
lamp and decorauve lamps
3) Volume
adjustment:
The volumeof IC mustc.
MP3 music.USB music or SD musc player can adjus'd
4) Battery power display function (conventional parameters for 7 lamps) a
5) Left/right
music buttonon the steering wheel: Every timeyou press tho leftjnqht
mustc button
once.
Will start for some time.
6) The dashboard has the Oil
meterlamp function,
7) Fan switch (the dashboard has the air-conditioningfan function)
3, Normal operation:
1) Manualfoot-treadmode
A. Tum on the main power switch B. Convert the switch into the foot-tread
mode C. Setect the
forwardfbackwarddirection D. Select thespeed gear E. Footswitch
2) Remote control code-matching operation
A- Turn on the main power switch in the car (the code-matching oporauonis valid within2 min)
B. Simultaneously keep pressing the speed change button
and sudden brake button
ot the remote control
for 5 seconds; if the lamp of firstgear. second gear and thirdgear twinkles. it will indicate thatthe
code-matching action is transmitted; it will indicate that the codes are matched successfully until the
lamp is on and stops twinkling:when tho code-matching action is received. the frontwheel will rotate
leftwardsfor Is and rightwardsfor Is.
3) Remote controlfunction
A. Forward/backwarg
button B. Turn-lefVrightbutton C. Sudden brakebutton D. Speed change
button E. It Willenter the steep state if no operation occurs within 1 min. You can press any button to
reawaken it.
Battery
Dashboard disptay lan•o
lamp
outte
Air outlet
MP3
connecting transfer
MP3.USB Fan
SO card
and
Volume
ad;ustment
Main
Front lamp
switch

pull
the
car
Handle
Seat firstgear
Pull the
car wheel
Seat frontsecond gear Seat front third
gear
Music button
Steering
Wheel Safety belt
Opén
Buckleup
Horn button

First gear, second gear
and third gear lamps
remote
control
ooo
Forward/bac war
movement b uttO
Le right
mo ment button
Sudden brake button
VI.
Battery
and
Charger Operating Guide
1 The
charging
socket is located at the fuel tank cap of the car.
The
battery
andcharger
which are provided or recommended
by
Chi10kb0
can be used only.
3.
Please
do not
play with
the charger and battery because they
4.
The
battery
charging operation is carried out only by adults
5.
The
battery
shall be fully charged before first use; the battery
charging
time
shall be 9-10 hours and can not exceed 15
6.
The
lukewarm
phenomenon of the charger and battery will
occur during charging.
WeightLimit
Power
Supply
Battery
specifications
Charging Source
Battery
charging time for
30KGS
Chargeable type
DC 12V 17AH
Input
AC loov-240V
50Hz 160 Hz
Charging Time: 9-10 hours
Speed change button
20
Signal
Socket
Charging plug
Output DC 15V/800mA
utility time:
1-2 hours
every time
Vll.
Simple
Fault Removal Guidance
Defective
conditions
I. The motorcycle
can
notbe driven.
2.Musicsound is
distorted
or silent
Key points of inspection
1) You can observe the battery power display lamp when checkingwhether
thebattery
power is enough. If only the red lamp is on, lease cha e thebatte immediatel
2) Check the power switch, all plugs of the control plate under the seat, and the battery
terminal line are properly inserted.
3) Check whether the circuit o the over-current
protector
s automatical
y disconnected
(when the motorcycle is overloaded and blocked, the circuit of the over-current
protector
will be disconnected to rotect the motor,
control ane) and dash receiver.
4) Check whether the motorcycle has been stored
fora long
time
and
itsbattery
is not
charged on time.
5) If the remote control cannot start the car. please check whether
the
remote
control
code-matching functionis normally
operated.
6) Check whether the remotecontrol
battery
power
is low.
the battery is full of power,otherwise the battery
needs tobe charged or replaced.

Vill. WARNING
1. Battery warning:
1) If the battery is not used for a long time, please fully charge thebattery
and
the
power switch for storage; the battery shall be recharged once everyother
the battery service life will be shortened or the battery can not be charged again.
n turn
during installation (the
reverse connection or short circuit of the positive and negative poles
of
the
battery
is
allowed to occur).
3) Non-rechargeable batteries are not to be recharged. not
4) New and used batteries
are not
to be mixed.
5) Exhausted batteries are to be removed from
the toy.
6) The supply terminals are notto be short-circuit.
7) Rechargeable batteries are to be removed from the toy before being char
8) Rechargeable batteries are only to be charged under adult supervision(for
ged(for
transmitter).
9) Batteries are only to be charged by adults or by children at least 8 years old.
(for
car).
2. Product warning:
1) There may be potential
sharp edges, sharp points or small parts before
the
assembly
of
this product, and therefore
this product shall be assembled by the
adult.
2) To avoid suffocation, keep the plastic bag away fromchildren.
Dispose of
allbags
immediately.
3) The children shall correctly use the motorcycle under the adult guidance and
SUPem•sion
otherwise they may make themselves or the others injured.
4) The motorcycle is suitable for being driven on the flat ground and strictly
prohibited
to
be
driven in such dangerous places as street,
road, sleep slope and beside
swimming
pool
otherwise the traffic and drowning accidents may occur.
5) Please put on shoes and protection
equipment
beforeuse, such as fastening
the
safety
belt and putting
on the helmet,gloves, knee pads, etc.
6) Small parts possibly fall off when this product is used improperly.
So, it is unsuitable
for
children under 36 months old.
7) Regularly check whether the battery,
charger, wire, plug, casing and other parts
are
damaged; if the damage occurs, please cease to use this product until
ithas been
repaired.
8) This product
is only allowed to be used by a child; the maximumloadis 30kg,and
therefore the overload is not allowed.
9) Keep away from
fire.
10) The product instructions shall be kept as they contain important
information.
11) This product should be used with caution since skill is requiredto avoid falls or collisions
causing injury to the user or third parties.
3. WARNING WARNING
To reduce the risk of injury,
adult
supervision is required.
Strictiy forbidden using on the roadways, near motor
vehicles, slopes,
swimming pools and where there is water;
Please wear shoes; this toy car can only be used simultaneously
by one
person.
Keep away from kids before assembled by adult, as there are potentially
sharp edges, points,
or small parts.

WARNING
battery, standard (carbon-zinc) battery or rechargeable
DO
not
alkaline
(Pick
el-cad
mium) battery.
WARNING
rotective
equipment; it is not allowed to use this toy
please
wear
traffic
the
road.
p
in tne WARNING
able for children under 3 years due to its maximum
groduct
is unsuit
pimensions
of entire car
122CM 63.8CM
and the design of the enclosed product
are
"Mercedes-Benz ,
subject
to
intellectual
property protection owned by Daimler AG. They
are
used
by
Chi Lok Bo Toys Company Limited underlicense.
K07-SMS-107-002
002-01