Merkury Innovations MI-EW020-999W Guide

SMART WI-FI
LED STRIP
START
GUIDE
Scan code for the
latest manual online

01
02
04
06
Download & Register
Prepare
Connect (Auto Discovery)
Questions, Troubleshooting, Notices
Contents
Start Guide
10
12
Google Assistant
Amazon Alexa
Voice Control Guide
Thank you for purchasing your MERKURY smart
home product.
Get started using your new devices by downloading
Geeni, one convenient app that manages everything
straight from your phone or tablet. Easily connect to
your home Wi-Fi, and control multiple devices from the
touch of your fingertips.

FCC Notice:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Important Information:
Read and follow all precautions, including the following: CAUTION: RISK
OF ELECTRIC SHOCK OR BURNS - USE IN A DRY LOCATION ONLY. The
weather resistant IP44 rating only protects the LED strip from splashes in any
direction. DO NOT IMMERSE IN WATER.
WARNING: The LED strip must be unplugged when making any modifications
to the device. Electrical currents are dangerous and may cause electrical
shock, injury, or death (in some cases)
Support:
If you encounter any issues, please contact us at support.mygeeni.com for help.
To explore our full selection of products, visit us at: www.mygeeni.com
[phone] Toll-free
© 2023 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006.
The illustrated product and specifications may differ slightly from those
supplied. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple and
the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc. Google, Google Play, and
related marks and logos are trademarks of Google LLC. iOS is a registered
trademark of Cisco in the U.S. and other countries and is used under license.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its
affiliates. All other trademarks and trade names are those of their respective
owners.
Made in China

1
START
GUIDE
Get Ready
Know your Wi-Fi
network and password
Make sure you’re
connecting to a 2.4GHz
Wi-Fi network (Geeni
can’t connect to 5GHz
networks)
2.4GHz
Download & Register
Smart Wi-Fi
LED Strip
Anchor
Mounts
Wi-Fi
Controller
What’s in the Box
Power
Adapter
User Manual
Make sure your mobile
device is running
iOS®13 or higher or
Android™ 9 or higher
iOS 13 Android 9
STEP 1
Download the Geeni
App from App Store
or Google Play.
Register an account
on your Geeni App.
01.
Enter your email
address.
02.
Enter the verification
code and create a
password.
03.
Log in to the App.
GET ITGET IT ONON

32
Prepare
STEP 2
Prepare
Plug In
LED Input
LED Strip
Power Adapter
Wi-Fi Controller
Reset Button
Press: Turn On/Off
Press & Hold: Reset
+
C
G
R
B
W
01.
Plug the device into the wall.
Make sure the indicator light on the device is flashing,
indicating the device is ready to connect.
*See reset instructions on p. 5
03.
Measure the LED strip for the desired length, starting
at the end closest to the connector
for the Wi-Fi Controller.
IMPORTANT: If you measure & cut
from the opposite end, you will not be able to
connect the LED strip to the Wi-Fi Controller.
02.
Measure the area you wish to attach the LED strip to.
Ensure that the area has a clean, solid surface.
+
C
G
R
B
W
+
C
G
R
B
W
+
C
G
R
B
W
04.
Located the closest cut mark to
your desired length. Each strip has
cut markings located every 10cm.
Take a sharp pair of scissors or
blade, and cut along the cut mark.
05.
LED Strip Adhesive Installation
*Follow Instructions Carefully
Position LED strip upon surface and press every section firmly for at
least 30 seconds ensuring a strong hold.
NOTE:
3M adhesive may not adhere well to vinyl
surfaces nor to delicate wallpaper.
Installation Using Anchor Mounts
If you would like, you may utilize the included anchor mounts for an
additional support. Each mount can be screwed into the wall with
a standard Phillips-head screwdriver (not included). Place mounts
ontop of LED light strip once it’s placed in desired location.
Be sure to thoroughly clean
surface or wall with any
standard rubbing alcohol
before applying adhesive
and let dry.
Peel adhesive lining from the
back of the strip light.

54
01.
Make sure:
Bluetooth is
turned on
Connect (Auto Discovery)
STEP 3
Set Up:
Auto Discover Device
Your device is now able to be
discovered magically to connect
to your home Wi-Fi network. It’s
quicker and easier than ever to
connect.
Device is Flashing Connect to
2.4GHz Wi-Fi
02.
While the device is flashing,
tap “Auto-Discovery” on the
Add Device screen of the
Geeni app.
Connect (Auto Discovery)
03.
The Geeni app will
automatically detect your
LED Strip using its wireless
Bluetooth connection.
05.
The Geeni app will try to
connect your device.
NOTE: Geeni can’t connect to
5GHz networks.
*If you are unable to pair
initially, reset your device
and try pairing using the
alternative method provided
in the app.
04.
The Geeni app will
automatically detect
the network that your
smartphone is connected to.
Enter the password to your
Wi-Fi network, then tap
“Next Step” and the device
will connect.
5
06.
The Geeni app will
attempt to connect.
This may take a few
moments.
Pairing Device
Add device:

76
Frequently Asked Questions
How do I customize my dashboard?
Select the “Edit” option on the top of “Home” page. Create
additional pages on your dashboard by dragging tiles to the
right and organize devices to fit how you use them.
How Many Devices Can I Control?
Geeni app can control an unlimited amount of devices in an
unlimited amount of locations. Your router may have a limit of
how many devices can be connected to one router.
How do I rename my device?
From your main device list, click on the device you want to
rename, then click “Device Settings”, then click on “Device
Name”. Rename your device to a more familiar name like
“Bedroom” or “Living Room” and then click Save.
The device appears offline or unreachable, what should I do?
Make sure your Wi-Fi router is online and in range.
Make sure you have the latest Geeni functionality by clicking
“Check for firmware update” in your device settings.
What’s the Wireless Range?
The range of your home Wi-Fi is heavily dependent on your
home router and the conditions of the room. Check with your
router specifications for exact range data.
If my Wi-Fi/Internet goes down, will Geeni still work?
Merkury products need to be connected to Wi-Fi in order to
use them remotely.
Questions. Troubleshooting. Notices
Troubleshooting
Reset the device
Reboot the device
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the
Wi-Fi setup. Check whether there are any Internet connection
problems. If the Wi-Fi signal is too weak, reset your Wi-Fi
router and try again.
System Requirements
Technical Specifications
Questions. Troubleshooting. Notices
Reset the LED strip by pressing & holding reset button for 5
seconds. The LEDs will flash and your device will be in pairing
mode again.
Reboot the LED strip by pressing & holding reset button
for 3 seconds. The strip will blink. This is the equivalent of
unplugging your device and plugging it back in.
Size: 0.39in x 196.8in
Input: 100-240V, 50/60Hz
Life Span: 10000 Hours
Weatherproof:
IP44 (Strip), IP20 (Controller)
Wi-Fi: IEEE 802.11N, 2.4GHz
(Not compatible with 5GHz Wi-Fi networks)
Mobile device running iOS® 13 or higher or
Android™ 9 or higher
Existing Wi-Fi Network

9
VOICE
CONTROL
GUIDE
Thank you for purchasing your MERKURY smart home
product. Make sure your devices are already set up
using the Geeni app, then follow these steps.
Contents
10
12
Google Assistant
Amazon Alexa
Voice Control Guide
Name and Control Each Device by Voice

1110
To control your Merkury smart
bulbs, plugs or surge protectors,
just say “OK Google,“ or “Hey
Google,“ and ask. Make sure your
devices are already set up using
the Geeni app.
“Hey Google, turn on all the lights in my bedroom.“
“Hey Google, turn off fan.“
“Hey Google, set the bedroom light to orange.“
“Hey Google, turn off the coffee machine.“
“Hey Google, set the living room to 50%.“
“Hey Google, dim porch light.“
Things you can say*:
*Some commands require compatible devices.
01
02
Open the Google
Home app and go
to Home Control
in the menu.
Tap the “+“ button.
04
Authorize your
account with
Google Assistant
using the
username and
password from
your Geeni app.
03
Choose “Geeni“
from the list of
Home Control
partners.
Now your Google Home app and
Merkury devices are linked!
You’re now able to say “Hey Google“
and control your Merkury devices.
At any time, go into the “Home Control“ section of the Google Home
app to set nicknames and rooms for your devices. You can rename your
devices in the Geeni app, and Google Assistant will refer to them by the
same name.
So if you rename a smart bulb to “Living Room“ or a nickname like
“Blossom,“ then Google Assistant will use that same name later on. You
can always give it a nickname using the Google Home app as well. You can
also assign bulbs to a specific room, like “Bedroom“ or “Kitchen.“
Google Assistant will be able to control devices by room.
Google Assistant

1312
To control your Merkury smart
bulbs, plugs or surge protectors,
just ask Alexa. Make sure your
devices are already set up using
the Geeni app.
“Alexa, discover my devices.“
“Alexa, turn on the bedroom light.“
“Alexa, set the bedroom light to orange.“
“Alexa, turn off the coffee machine.“
“Alexa, set the living room to 50%.“
“Alexa, dim porch light.“
*Some commands require compatible devices.
Things you can say*:
01
02
Open the Alexa
app and go to
Skills in the menu.
Search for Geeni
then tap Enable.
You can rename your devices in the Geeni app, and Alexa will refer to
them by the same name.
So if you rename a smart strip to “Living Room“ or a nickname like
“Blossom,“ then Alexa will use that same name later on.
Alternatively, you can create an Alexa group, like “Bedroom“ or
“Downstairs,“ and add the device to the group.
Alexa will recognize the group name in the Alexa app, or the device name
in the Geeni app.
More information is available at:
http://tinyurl.com/alexa-smart-home-groups
Amazon Alexa
04
Choose “Discover
Devices.“ After a
few seconds your
Merkury devices
will be displayed
under Smart
Home in the
Alexa app.
03
Authorize your
account with
Smart Home
Skills using the
username and
password from
your Geeni app.

Can’t connect?
Need help?
WE
CAN
HELP
DO NOT
RETURN THIS
PRODUCT TO
THE STORE
support.mygeeni.com
[phone] Toll-free
or tap ‘support‘ for help in the Geeni app.