MERRY CAT WASHROOM MPS006 User manual

PRODUCT
R R YE S
M
MPS006 / MPS007 GR CAT WASHROOM™
COMPONENTS
1 Left Panel (A)
1 Top Panel (F)
1 Towel Hanger (H)
1 Floor Panel (D)
1 Right Panel (B)
1 Door Panel (E)
1 Back Panel (G)
1 Shelf Panel (C)
* Power Tool NOT Recommended
TOOL REQUIRED
Phillips Screwdriver
ver. 12.0
COPYRIGHT 2007 Merry Product, Inc
Please check contents before assembly. If any items are missing or damaged, do not take the unit back to
the store. Call 416-597-2291 for customer service and we will save you time by correcting any problems directly
for you.
page 1
HARDWARE
Locking Bolt
#1 (12 Pcs)
Screw Cover
#3a (12 Pcs + 3 spare)
Small Cam
#2a (8 Pcs + 2 spare)
Wooden Dowel
#4 (4 Pcs)
Large Cam
#2b (4 Pcs + 1 spare)
Door Knob
#6 (1 Pcs)
Wood Plug
#5 (4 Pcs)
Nut
#7 (2 Pcs)
Washer
#8 (2 Pcs)
Only slight turn of
Cams required.
Do NOT overturn.
Insert threads of Locking Bolts
completely, and stop once threads
are no longer visible.
Do NOT overturn.
NOTE:
* Read all instructions before starting
* Assemble on rug or cardboard to prevent scratches tothe floor and product.
* To ensure proper assembly we have included the following guides:
Reference this guide when assembling all
Cam Locks (Hardware #2a & #2b).
Reference this guide when assembling all Locking Bolts (Hardware #1).
US Patent No. D569,053

STEP 3
Slide the Back Panel (G) into the slots of
the Right and Floor Panel.
figure 3
figure 4
figure 2
D
B
#1
#1
#2a & #3
#2a & #3
#2a & #3
#4
#4
A
#1
#1
#2a & #3
G
ver. 12.0
COPYRIGHT 2007 Merry Product, Inc page 2
STEP 1
Attach the Towel Hanger (H) to the Right Panel
(B) or Left Panel (A) using washer (#8) and nut
(#7) on each end.
figure 1
A or B
H
#8 #7
STEP 2
Insert two Locking Bolts (#1) and one
Wooden Dowel (#4) into the Right Panel (B).
Then attach the Right Panel to the Floor Panel
(D) by inserting and tightening the Small
Cams (#2a). Apply the Screw Covers (#3)
onto of the Small Cams.
STEP 4
Insert two Locking Bolts (#1) and one
Wooden Dowel (#4) into the Left Panel (A).
Then attach the Left Panel (A) to the Floor
Panel by inserting and tightening the Small
Cams (#2a). Apply the Screw Covers (#3)
onto the Small Cams.
US Patent No. D569,053

STEP 7
Insert 4 Small Cams (#2a) into the holes on the
side of both Left and Right Panels. Then apply
the Screw Covers (#3) after fastening.
STEP 6
Insert 4 Locking Bolts (#1) and 2 Wooden
Dowels (#4) into the Shelf Panel (C).
Together, at the same time, attach the Shelf
Panel (C) and Door Panel (E) to the other
panels.
#1 x 4
#4 x 2
C
figure 8
figure 6
figure 7
#1 x 4
#3 x 4
&
#2b x 4
#2a x 4 & #3 x 4
F
E
ver. 12.0
COPYRIGHT 2007 Merry Product, Inc page 3
STEP 8
Insert 4 Locking Bolts (#1) into the Top
Panel (F).
Inset the Top Panel into the 4 posts of the
Cat Washroom™. Secure with 4 Large
Cams (#2b). Apply 4 Screw Covers (#3) to
the Large Cams.
figure 5
#6
E
STEP 5
Attach the Door Knob (#6) to the Door Panel (E).
US Patent No. D569,053

TROUBLESHOOTING
CARE INSTRUCTIONS
Thank you for choosing MERRY PRODUCTS’™ PET HOUSES AND PET BEDS.With little care and
maintenance, MERRY PRODUCTS’™ PET HOUSES AND PET BEDS will provide your pet with comfort and
enjoyment for many years to come!
• To clean panels, use clean water on a damp cloth.
• When assembling MERRY PRODUCTS’™ PET HOUSES AND PET BEDS, please handle all
panels and/or hardware with care to avoid any possibilities of damages and/or injuries.
Merry Products, Corp.
Step 1:Towel Hanger The option is available to attach the Towel Hanger to the Right or Left Panel.
Options If you decide to change this possition in the future, remove the wood plugs and
exchange sides. The wood plugs may be easily remove by tapping the back of
the plugs with a screwdriver.
Step 2: Assembly of Esure that the front lip on the floor panel is facing down.
Floor Panel
Step 3: Back Panel Does There may be dust or debris preventing the back panels from easily sliding into
Not Slide Into Side and place. Clear the pathway carefully using a thin object or tool.
Floor Panels
Step 9: Door Panel Catches Use a screw driver to loosen the screws on the top hinge slightly. Once top hinge
on Floor Panel when being is loose, lift the bottom of the door slightly. Tighten back the screws on the top
Opened or Closed hinge.
PRODUCT
R R YE
S
M
MPS006 / MPS007 GR CAT WASHROOM™
ver. 12.0
COPYRIGHT 2007 Merry Product, Inc page 4
figure 9
STEP 9
To seal off the holes not used for the Towel
Hanger, insert Wood Plugs (#5) into the holes
on this side panel.
#5
#5
US Patent No. D569,053