Prevue Hendryx 3165 User manual

CUSTOMER SUPPORT
For assistan e or repla ement parts,
please onta t Prevue Pet Produ ts:
PHONE [phone]
ONLINE www.prevuepet. om
EMAIL customerservice @ prevuepet.com
3165—03/21 — A4.1 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
HARDWARE
& TOOLS:
KEY:
BF = Base Frame
G= Grille
T = Tray
S=Shelf
L=Leg
PF = Playtop Frame
PT = Playtop
Component
FR = Frame Rail
FP = Front Panel
BP = Ba k Panel
3165 Corner Cage with Playtop
PARTS LIST
MODEL #
Instru tions online at www.prevuepet. om
]Bp2 ]Bp1
]Fp1]Fp2]Fp3
]Fr1
]Fr4]Fr5
]Fr2
]Fr3
]L2
]L3
]L4.A
]L4.B
]L1
]S
]G
]Bf
]Pf
]]Pt4
]]Pt3
]]Pt2
]]Pt1
]T1
]T2
Casters
3 p s
These parts are
inter hangeable:
Fr 1 + 2 + 3
]]]Fr 4 + 5
Bp 1 + 2
Fp 1 + 3
T1 + 2
L1 + 2 + 3
⁕
Hex Key (in luded)
PERCH
CUPS & HOLDERS
PLAYTOP CUPS & HOLDERS
Short
Hex S rew
1 p s
Long
Hex S rews
18 p s
+ 2 extra

CUSTOMER SUPPORT
For assistan e or repla ement parts,
please onta t Prevue Pet Produ ts:
PHONE [phone]
ONLINE www.prevuepet. om
EMAIL customerservice @ prevuepet.com
3165 Corner Cage with Playtop
ASSEMBLY
MODEL #
Instru tions online at www.prevuepet. om
3165—03/21 — A4.2 For more wonderful cages, toys, and accessories for cats, irds, chickens, ra its, ferrets, dogs and small animals, visit www.prevuepet.com
TOOL: Hex Key (in luded) • For best results, follow the Assembly Steps in the order presented.
KEY:
BF = Base Frame
G = Grille
T = Tray
S=Shelf
L= Leg
FR = Frame Rail
FP = Front Panel
BP = Ba k Panel
PF = Playtop
Frame
PT = Playtop
Component
1PIECES
interchangeable
trays are interchangeable
Slide the pull-out grille into
the upper hannels.
Slide the pull-out tray into the
base frame, under the grille.
]Bf
]G
]L1 + 2 + 3
]L4.A
]L4.B
]T1
]S
Atta h the one-pie e orner
and ba k legs first.
Atta h the two-pie e front/ enter leg.
Hex s rews atta h from the top, down through the
frame, and into the treaded holes of the bottom leg.
Set the ase frame into the bra kets
at the tops of the legs. Atta h with
one long hex s rew for ea h orner
and ba k leg.
For the front leg, use the small hex
s rew.
Fully insert a caster in the base of ea h of the
orner legs and the ba k leg.

3165—03/21 — A4.3 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
2PIECES
interchangeable
interchangeable
interchangeable
interchangeable
]Bp1]Bp2
]Fp1
]Fp2
]Fp3
2Thi k, verti al wires
fa e the age exterior.
Thin, horizontal wires
fa e the age interior.
⁕
]Fr 1 + 2 + 3
]Fr 4 + 5
1Atta h the orner
and ba k frame rails
with a hex s rew at the
base of ea h.
3Slide the front frame
rails over the posts
on the base.
The posts
have a snap-
button.
Push this in
and slide the
rail down
until the
button pops
out of the
hole on the
frame rail.
4Slide the front panels
down through the hannels
on the frame rails.
NOTE: Panels with cup
doors should e oriented
with the door opening out,
and the cup stop at the top.
NOTE: Thin, horizontal
wires should face the
cage interior.
At the panel base, insert
the extended verti al wires
down into the frame holes.
2Slide the ack panels
down through the hannels
along the frame rails.
NOTE: Thin, horizontal
wires should face the
cage interior.
At the panel base, insert
the extended verti al wires
down into the frame holes.

Assembly ompleted. {
3165—03/21 — A4.4 For more wonderful cages, toys, and accessories for cats, irds, chickens, ra its, ferrets, dogs and small animals, visit www.prevuepet.com
3PIECES
]Pf
]Pt2]Pt4
]Pt3
]Pt1
4PIECES
← Atta h the perch ar
to the U-support bar.
↓ Atta h the assembled
unit to the playtop frame.
Insert cup holders into the
per h bar.
Insert the ladder into the
playtop frame, and then the
per h bar.
]T2
↙ Slide the pull-out tray
into the playtop frame.
Set the playtop frame onto the frame rail bra kets.
At the front, insert the posts into the frame rails.
Insert all extended panel wires into the holes on
the underside of the frame. Make certain to settle
the frame in position at all points before atta hing
in pla e with hex s rews.
↖ Install the perch on the
ba k panels, on horizontal
wires of equal height. Per h
is held in position by pushing
up against the verti al wires.
Open the up door.
Insert the cup holder
into the sleeves on
the door.
Insert the up into
the holder. ↘
Insert the playtop per h
onto the per h bar. ↗
Insert ups into holders. →
trays are interchangeable
align extended wires
into holes on the under-
side of the frame