JWA Mullins User manual

57cm
34cm
111cm
ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
MullinsMullin
3 Tier Pet Scratch Pole
ITEM CODE:76146
1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receiptFor any assistance with assembly or for missing parts please refer to your receipt

PRE-ASSEMBLY PREPARATIONPRE-ASSEMBLY PREPARATION
Before you start :Before you start :
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that
may damage the product
2.Take care when li ing. Product should be assembled as near as possible to the point
of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instruc ons carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over ghten the screws and bolts as this may damage the threads
7.Assembly is to be carried out by a competent adult(s) ONLY
8.During assembly, children should be kept away from the product due to possible
risk to injury.
9.Do not use this item if any components are missing or damaged.
Please keep the instruc ons for future reference.
2
20 1

33
1.
P1.
P4.
A. B. C. D.
P5.
7pcs
7pcs
1pc1pc 1pc1pc
1pc1pc
1pc1pc
M8*35,18pcsM8*35,18pcs M8*65,2pcsM8*65,2pcs M8,1pc M6,1pcM6,1pc
P2. P3.
.5.4
2. 3.
1pc
Long sisal pole Short sisal pole
Long plush pole
Short plush pole
Inner plush pole
BoƩom board Middle board Top board
Cat cubby Felt fabric
1
2
3
4
5
P2
P1
P3
P5

44
Step 1
You will need
B.
M8*35,4pcsM8*35,4pcs
M8*65,2pcsM8*65,2pcs
3pcs3
pcs
4
*3
A
A
A
A
BB
P4
1c p
AƩach inner plush poles (P4) to the inside of cat arch cubby (4) as per the diagram below,
with screws (A) and (B).
Insert all screws before fully Ɵghtening.
Tighten screw (B). Using allen key (C) Ɵghten screw (A).
4. Cat cubby P4.Inner plush pole
A.

55
Step 2
You will need
A
A
A
1
2
A
A
M8*35 8pcs
AA
A
P4 P4 P4
P4
A.
1c
p1c p
Insert all screws before fully tightening.
Tighten with allen key (C).
1. BoƩom board 2. Middle board
P4.Inner plush pole
4pcs
Attach inner plush pole (4) to bottom board (1) and middle board (2) using screw (A).

66
Step 3
You will need
M8*35,1pcM8*35,1pc
A
P5
P1
P2
A.
4.
4
P1.
P2.
P5.
1c
p
1c
p
1c
p
1c
p
Long sisal pole Long plush pole
Short plush pole
Insert all screws before fully tightening.
Tighten with allen key (C).
Attach short sisal pole (P5) to fixed cat cubby (4) using screw (A).
B
B
Screw long sisal pole (P1) and long plush pole (P2) into screw (B) by rotating part until tight.

77
Step 4
You will need
5.
5
A
A
A
D
M8*35,3pcsM8*35,3pcs M6,1pcM6,1pc
.D.A
1pc
Screw in the part (D)
Felt fabric
Wrap the felt fabric (5) around the poles and connect with velcro.
Connect cat arch cubby section and the bottom part by using screw (A).

88
Step 5
You will need
.3P.3
3
A
M8*35,2pcsM8*35,2pcs
A
P3
A.
1c
p1c
p
Attach top board ( 3 ) and short sisal pole (P3) to cat arch cubby by using screw (A)
Insert all screws before fully tightening.
Tighten with allen key (C).
Top board Short sial pole
.

99
ASSEMBLY IS COMPLETE

1010
SPOT CLEANING:
PRODUCT CARE
Dot not rub.
Do not spot clean with solvent.
Treat spills and stains as soon as possible.
Gently scrap off any soil or blot any liquid from the surface of the fabric before
applying cleaner.
Apply proprietary cleaning agents strictly according to instructions to remove
the residue of the spill.
Do not saturate the fabric or interior with water or other cleaning liquids.