Petoneer FS030 User manual

Warming & Sterilizing Unit
User Manual

Meet your Warming & Sterilizing Unit
UVC Lamp
Warming Bar
Thermometer
Probe
Warming
Indicator LED
UVC Lamp
Indicator LED
UV
$POUSPMMFS
8BSNJOH.PEVMF
%POPUJNNFSTFUIFDPOUSPMMFSJOXBUFS

Instruction
1. Remove the reservoir lid, fit the cable through
the reserved outlet hole. Restore the lid and warmer
onto the tank. Fix the controller slot to the wall of
the tank.
2. Connect the power cord to the adapter and
power on.
5IFVOJUOFFETBOJOEFQFOEFOUQPXFSTVQQMZ

Please read the manual carefully before use.
Children can only operate under the parent's guide!
Do not immerse the controller in water.
Do not look directly at or touch the UVC lamp while
the unit is working.
When cleaning the fountain or the tank, please
disconnect the power supply and take the warmer out.
After a period, scale deposits may appear on the
warming bar. It is a normal.
The warmer doesn't warm up to 28°. Due to high
body temperature, the warming process is not
apparent. The lower the ambient temperature, the
obvious the warming effect.
UVC light can't penetrate the plastic. The visible
light during UV working does not have any damage.
After a long time of UV radiation, yellowing around
the UV lamp is normal.
Precautions
XXXQFUPOFFSDPN