Metal Man Deluxe Welding Tool Cabinet User manual

Deluxe Welding Tool Cabinet
OWNER’S MANUAL
8/2020
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.

EFFECTIVE June 1, 2015
LIMITED WARRANTY
This warranty applies to the original purchaser and is subject to the terms and conditions listed below. This Limited Warranty is for
new equipment sold after the above date, providing coverage for defects in material and workmanship at the time it is shipped from
the factory.
Limited to the warranty periods below, METAL MAN WORK GEAR CO will repair or replace the item under warranty that fails due to
defects in material and workmanship. METAL MAN WORK GEAR CO must be notified within 30 days of the failure, so as to provide
instructions on how to proceed with the repair of your unit and warranty claim processing. Warranty period begins at the time the
unit is purchased from and Authorized METAL MAN WORK GEAR retailer. Keep your receipt as proof of purchase.
Warranty Periods
90 Days Warranty on METAL MAN Branded welding carts
Limited Warranty
All parts for METAL MAN branded welding carts. This warranty covers the absence of, or defective parts.
Voiding Warranty
Warranty does not apply to: shipping damage, misuse and abuse of the unit and alteration of the unit in any way.
Warranty Claim
This is a Parts only warranty. Contact METAL MAN WORK GEAR CO AT 888-762-4045. Retain your receipt in the case a
warranty claim is needed. No warranty will be provided without the original receipt from an authorized METAL MAN WORK GEAR
dealer.

GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions
listed below may result in serious injury or death.
CAUTION: Do not allow persons to operate or assemble this unit until they have
read this manual and have developed a thorough understanding of how this unit works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built
into this product but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
USE AND CARE
•Do not modify this unit in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment. There are specific applications for
which this unit was designed.
•Always check for damaged or worn out parts before using this unit. Broken parts will
affect the operation. Replace or repair damaged or worn parts immediately.
•Store idle. When this unit is not in use, store it in a secure place out of the reach of children.
Inspect it for good working condition prior to storage and before re-use.
SPECIFICATIONS
Item
Description
Product Dimension
33.5”x 17.6”x 33.5”
Packaging Dimension
22.5”x 16.7”x 31.3”
Weight
90 lbs.
Loading Capacity
150 lbs.

DESCRIPTION
The Deluxe Welding cabinet provides an integrated all-in-one solution for portable welder or
plasma cutting applications. It is designed for the welder or plasma cutter to sit on top of the
cabinet. It includes 4 drawers on ball bearing slides. The bottom drawer is 9 inches deep and
can fit a typical welding helmet. The bottom middle drawer is a 6-inch-deep drawer that works
well for storing extra welding wire or safety gear. The 3-inch top middle drawer provides plenty
of space for all your welding related tools. The top drawer is one inch deep and sectioned off
providing a convenient place to store all your consumables. The top shelf is 14 inches wide and
20 inches deep and is 33 inches from the floor, putting the machine controls at a comfortable
operating height. The 17-inch-wide base, 7-inch rear wheels and locking front casters make this
cart stable and easy to maneuver. Store up to 7 1/2-inch diameter bottles in the cylinder rack.
Maximum loading capacity is 150Lbs.
ASSEMBLY OPERATION
1. The cart should be placed on a flat surface to prevent the cart from moving
during assembly.
2. Do not remove parts from the cart while it is moving.
PACKAGE CONTENTS

Please check the contents of your package. These contents are stored inside the
cabinet drawers.

ASSEMBLY

DIAGRAM & PARTS DIAGRAM
Reference #
Part#
Description
Qty.
1
105100001
COTTER PIN
2
2
105100002
FLAT WASHER
2
3
105100042
RUBBER WHEEL
2
4
105100043
AXLE
1
5
105100034
HEX BOLT
20
6
105100032
SPRING WASHER
20

7
105100033
FLAT WASHER
20
8
105100047
BOTTOM CYLINDER TRAY
1
9
105100048
HEX BOLT
8
10
105100049
LOCK (SPRING) WASHER
8
11
105100177
FLAT WASHER
8
12
105100051
LOCKING CASTER WHEEL
2
13
105100052
DRAWER SLIDES (TOP MIDDLE,
BOTTOM MIDDLE, BOTTOM DRAWERS)
3 SETS
14
115100003
DRAWER 4 (BOTTOM)
1
15
105100053
NUT
22
16
105100054
DRAWER 3 (BOTTOM MIDDLE)
1
17
105100055
DRAWER 2 (TOP MIDDLE)
1
18
105100056
DRAWER 1 (TOP)
1
19
105100057
DRAWER DIVIDER
1
20
105100058
DRAWER SLIDE (TOP DRAWER)
1 SET
21
105100059
HANDLE
1
22
115100004
RIGHT SIDE PANEL
1
23
105100060
TOP SHELF
1
24
105100029
SELF-TAPPING SCREW
29
25
105100035
CYLINDER SUPPORT RACK
2
26
105100036
CYLINDER SUPPORT CHAIN
1
27
105100061
SCREW
46
28
105100062
FLAT WASHER
46
29
105100063
LOCK (SPRING) WASHER
46
30
105100064
HEX BOLT
24
31
115100005
LEFT SIDE PANEL
1
32
105100015
CABLE WRAP
2
33
105100065
CART FRAME
1

Metal Man Work Gear Company
1760 Prospect Ct #120
Appleton, WI 54914
www.me talmang ear.com
888-762-4045