VEVOR ETG-24-24 User manual

INSTRUCTION FOR
WORKBENCH

WORKBENCH
ETG-24-24
01
ETG-24-24

Please feel free to contact us:
CustomerSe[email protected]
NEED HELP? CONTACTUS!
This is the original instructionPlease read all manual instructions carefully

The appearance of the product shall be subject to the product you
received. Please forgive us that we won't inform you again if there
is any technology or software updates on our product.

NAMES OF PARTS
02
① Panel
② Shelves
③ Round tube
④ Collar
⑤ Mounting sleeve
⑥ Casters
PARTS LIST
• This product is easy to install, just follow the steps Open the package
to get components: 1 panel, 1 shelf, 4 round tubes, 4 mounting sleeves,

•


circular tubes, adjust the four corners of the shelf to the same
height, and then lock the shelf and panel Finally, press the

(or casters) into the installation sleeve to complete the
installation.
①
②
③
④
④
⑤
⑥

03
P2
P1
P3
Twist the upper panel bolts
3029 31
P4
Use a ruler to set the height
and mark it
P5
The shelves are placed at the
same height according to the
drawn line
Press the mounting sleeve into
the round tube
P7

casters)
P6
Twist the shelf bolts
Torque is greater than or equal
to 25 N•m


04
PRECAUTIONS


workbench are close to the ground and the table cannot be shaken.
• Each workbench has a maximum weight limit, please be careful not
to exceed the maximum weight when using it.
• 
replacing the casters, if the workbench does not need to move,
please step on the brakes on the casters to ensure that the
workbench will not move when pushed.
Precautions:
UK Impoer: FREE MOOD LTD
Address:
EU Impoer:
Address: 250 bis boulevand Saint-Germain 75007 Paris
Manufacturer:
Address:
Nanhai, Foshan, Guangdong, China

E-mail: CustomerSe[e-mail]