Stratco SS-10428 User manual
Product
THANK YOU FOR PURCHASING YOUR 6 DRAWER ROLLER TOOL CHEST.
Please carefully read and follow these instructions to assemble your unit.
ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
For Your Safety
NOVEMBER 2023
Warnings
SS-10428
1
6 DRAWER ROLLER
TOOL CHEST
• Read these instructions carefully and use the product correctly. Make sure to understand and follow any warnings.
• We’re not liable for any product damage, body injury, property damage, or other damages caused by incorrect use.
• If you have any doubt, please contact the store or our customer service centre.
• This product is only for tool storage purpose. Do not use it for other purposes.
• Persons other than professionals should not disassemble, repair or modify the product.
• Although it can be locked, we do not provide guarantee for safety of contents in it.
• Keep children, infants and pregnant women away from installation places.
• Handle this product carefully. If it falls or receives a strong impact, please check all parts again carefully.
• If you find anything wrong, please stop using and call the store you purchased from or contact our customer service.
• Do not use the product when you are overworked, taking alcohol or drugs. It may cause injury by improper use.
• Do not overload and make sure all drawers are closed and locked when moving.
• Do not open more than one drawer at a time and make sure tools are evenly distributed inside.
• Install this product on a clean, flat and hard floor inside the house. After installation, please lock the swivel casters.
• Do not step, sit or lean on the product .
• Do not roll the product on rocky, sandy and uneven roads. Moving the product over a long distance may cause
damage to the casters.
• Do not perform welding, hammering or disassembly work on top plate.
• Lubricate casters and bearing rails regularly.
• Item code: SS-10428 (THD-372061DE)
• Overal size: W 940 x D 330 x H 940mm
• Weight: 40kg
• Top plate size: W 935 x D 328mm
• Top plate loading: 30kg
• Drawer size: 1 - W 830 x D 290 x H 110mm
2 - W 510 x D 290 x H 75mm
3 - W 510 x D 290 x H 154mm
• Drawer loading: 10kg
• Door size: W 310 x D 310 x H 550mm
• Shelf size: W 310 x D 290mm
• Shelf loading: 25kg
• Caster size: D4” x T1 .25”
1
2
3
Installation
Casters
Side Handle
How to Use
2NOVEMBER 2023
SS-10428
6 DRAWER ROLLER
TOOL CHEST
/ ' / '
□
§L
0
0
0
t M6
0
/ ' / '
□
§L
0
0
0
t M6
0
/ ' / '
□
§L
0
0
0
t M6
0
/ ' / '
□
§L
0
0
0
t M6
0
/ ' / '
□
§L
0
0
0
t M6
0
• Please remove package and take out caster box and side handle box from drawers.
• Please take out shelf and mats and lock the cabinet.
• Check all accessories carefully. If you find anything damaged or missing, please contact the store you purchased
from or our customer service centre.
• Please turn the cabinet upside down
with the help of two or more people.
• Swivel casters should be on one side
and make sure M8 bolts are tightened
with a 12mm wrench.
• Attach side handle on swivel casters
side and tighten M6 bolts.
• Please notice ‘ON’ and ‘OFF’ are stamped on casters.
• When locking, you can push down ‘ON’ side and confirm it does not move.
• Please lock two swivel casters together.
• Push down ‘OFF’ sides to unlock the casters.
REMOVE DRAWERS
• Open the drawer and check the levers of ball bearing slides.
• Push down on the upward lever and push up on the downward lever
at the same time and pull out the drawer.
INSTALL DRAWERS
• Align the drawer rails with rails on cabinet and push it in.
• Pull out and push in the drawer for several times to make sure it is
running smoothly.
/ ' / '
□
§L
0
0
0
t M6
0
Turn cabinet upside down.
Table of contents
Other Stratco Tools Storage manuals
Popular Tools Storage manuals by other brands
Harbor Freight Tools
Harbor Freight Tools 6843 Assembly and operating instructions
Craftsman
Craftsman 28180 - Fixed-Base Router/Table Combo product manual
TOOLCRAFT
TOOLCRAFT WSW-307 operating instructions
Sealey
Sealey AP1010 instructions
Husky
Husky HOAA52B11 Use and care guide
Torin BIG RED
Torin BIG RED TSK7513 Assembly instructions