Extreme Tools TXPIT7009BK User manual

R
Painted Steel Cabinet Manual
Extreme Tools Inc.
740 Frontenac Road
Naperville, IL 60563
630-369-9303
TXPIT7009BK
TXPIT7009BL
TXPIT7009RD

2
Parts List
3
4
1
11
14
16
20
24
17
18
22
21
19
15
13
5
6
7
9
10
12
23
8
2
27
26
25
28
29
Ref # Description Part # Qty
x x x
The keys are taped
to the inside of first drawer.
Replacement keys may
be ordered using the code
that appears on the face
of the lock.
To order replacement parts,
have the part number and
quantity ready.
Not all parts are available
under warranty. Those
parts not available may
be purchased.
1 Lock and Key (1201-1204) 304007 1
2 Shelf 218860 2
3 Shelf Support 203902 8
4 M4x5mm Phillips Hex Bolt 320060 4
5 Trim Set 315044-315045 1
6 Trim 315747 2
7 Trim 315049 7
8 Drawer Pull 301743 7
9 Drawer Liner 550805 7
10 Shelf Liner 550843 4
11 Slide Set 300176-300177 10
12 Door Pull 301647 2
13 M10 Cap Nut 323050 16
14 Tire (Tubeless)
Tire pressure: Max ination 24PSI
319026 4
15 Ring Bolt 321106 4
16 Washer 324054 4

3
17 Spring Washer 324053 4
18 M10x30mm Hex Bolt 321046 4
19 Positioning Rubber 314150 6
20 Control Handle 108388 1
21 Handle Sleeve 314149 2
22 Brake Mechanism 317010 1
23 Trim 315046 2
24 Work Top 109460 1
25 Drawer 109461 4
26 Drawer 109462 2
27 Drawer 109463 1
28 Caliper 317010-C 1
29 Rotor 317010-F 1
Tools Required for Assembly
· 16mm Wrench
Assembly
Control Handle Attachment
After removing the pit cart from the
package, install the control handle as
shown below.
Note: Please remove bolts prior to
attempting control handle attachment
Control handle
Bolt
Hook

4
Operation
Moving the Pit Cart
Brake unlock: to unlock the brake
release the hook downward
Brake lock: to lock the brake slide
hook over the bolt
Drawer Removal
Pull the drawer out so that it’s
almost fully extended. Push up on
the black release lever on one side,
while pulling down on the black
release lever on the other side.
While holding the levers in the
positions as instructed above,
pull the drawer outward until
it is released from the drawer slide.
Drawer Replacement
Extend the drawer slides.
Insert the brackets on each side
of the drawer into the slots in the
slides, being careful that they are
properly positioned. Once properly
inserted, completely close the
drawer to set the slides in their
proper positions.
Raise and Release Drawer Fronts
This unit is equipped with raise
and release drawer fronts.
To open, lift up on the drawer
front while pulling towards you.
To close, shut the drawer rmly
until the latch engages.
If the drawer does not stay closed,
the hook may be bent, or it may be
rubbing against the drawer slides.
To x this problem, lightly bend the
hook until the drawer will engage in the slide.
PUSH UP
(RIGHT HAND SIDE)
PUSH UP
(RIGHT HAND SIDE)
PUSH DOWN
(LEFT HAND SIDE)
Lift

5 08/16
Safety
WARNING
Do not attempt to lift the unit by its side handles using chains, ropes or lifting
devices, if two people cannot lift the unit. Use a forklift placed under the bottom
of the unit if this situation occurs. The side handle may fail, which may cause
personal injury or damage to the product.
Lock the drawers before moving this product. The drawers could come open
and make the product unstable and tip, which may cause personal injury or
product damage.
DO NOT stand on this product or lean on the drawers or work top.
WEAR SAFETY GLASSES when removing or repositioning the slides. The tool
could slip, which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This
may cause personal injury or product damage. Mounting this product to any
vehicle in any manner will void warranty.
DO NOT tow with power equipment. The product could tip, which may cause
personal injury or product damage.
DO NOT alter this product in any manner. For example, do not weld external
lockbars or attach electrical equipment. This may cause product damage or
personal injury.
CAUTION
The maximum weight for each drawer should be no more than 100 lbs.
When moving this product, do not pull it. Push the product to prevent personal
injury.
USE THE BRAKES when not moving this product. This will prevent the product
from rolling, which may cause personal injury or product damage.
BE CAREFUL when opening more than one drawer. The product could become
unstable and tip, which may cause personal injury or product damage.
Secure this product properly before moving it with a forklift.
Keep the product on level surfaces. The product could become unstable and tip
if stored or moved on an uneven surface, which may cause personal injury or
product damage.
IMPORTANT: DRAWERS MUST BE CLOSED and TOOL BOX MUST BE
LOCKED USING KEY BEFORE MOVING.