Metalcraft 142-2-5 User manual

Assembly Instruction
MODEL:142-2-5
PRODUCT SIZE(LxWxH):390x850x88cm
PLEASE READ CAREFULLY BEFORE ASSEMBLY

Assembly and Maintenance Advice
1. For safety purposes, we strongly recommend that this product is assembled by at least
three persons.
2. Some components have sharp metal edges. Please be careful when handling metal
components. Please wear gloves, shoes and safety goggles during assembly.
3. DO NOT climb or stand on the roof. Heavy articles should not be leaned against
the greenhouse.
4. Keep the roof and gutter clear of snow, dirt & leaves. Allowing snow to build up on
the roof may damage the product.
5. When your product needs cleaning, use a mild detergent solution and rinse with cold
clean water. Do not use acetone, abrasive cleaners or strong detergents to clean
the panels.
Tools Provided:
Tools Required when Assembly (Not Provided)
Assembly at least by three Persons
3
1

142-2-5 (ALU Box)
PART
NO
QTY
PART
NO
W01
W02
CX
QTY
4
1
L01A
6
1
1
2
1
1
01-L02A
01-L02B
02-L02A
02-L02B
03-L02A
03-L02B
01-L02G
01-L02H
4
J01
J02
106
60
J03
HL
9M
1
2
18
8
HL2
S01
M6X35
2
18
26
18
104
146
8
L04A
L05A
12
2
M01
M02
Z01
M6X60
Z02
M4.2X16
Z03
M4.2X25
Z04
Ø6X16
L06A
L08A
12
1
L08B
1
2
L09A
L11
8
24
6
L12
4
L13
K1-1
1
1
K3-1
2

142-2-5 (PC Box)
PART
NO
Y1
QTY
4
6
6
1
4
Y2
Y3
Y9
PC BOX
Y10
3

PART
NO
QTY
PART
NO
W01
W02
CX
QTY
4
PART
NO
QTY
PART
NO
J03
QTY
2
1
Y1
4
1
1
4.29M
L01A
01-L02A
1
Y9
01-L02B
01-L02G
01-L02H
1
2
1
Y10
J01
HL
26
2
6
8
L04A
HL2
4
2
S01
M6X35
L05A
L08A
L09A
L11
6
M01
M02
1
2
14
6
K1 Assembly
Z01
M6X60
Z02
M4.2X16
Z03
M4.2X25
Z04
Ø6X16
8
1
20
53
2
K1-1
8
4

Fix the wheels onto L01A (3PCS),
using S01 & M01.
Fix L08A onto K1-1, using Z02.
Fix L01A * 2PCS onto K1-1 using Z01,
shown as above.
5

1. Insert L11 into L04A as shown, and fix it with L04A using Z02;
2. Fix L04A onto K1-1 as shown, using Z02.
Attention: Y1 must be placed into the channel of L04A & L01A at the same time.
Make sure all the panels are in the right position before fixing Z02 tight.
Fix 01-L02B with L01A and L04A, using Z01 & Z02.
6

Attention: Y1 & Y9 must be placed into the channel of
L04A/L01A at the same time.
Make sure all the panels are in the right position
before fixing Z02.
Fix L04A onto 01-L02B as shown, using Z02.
Insert L11 into L04A as shown,
and fix it with L04A using Z02;
Slide Rubber J03 into
the channel of 01-L02A.
Fix 01-L02A with L01A and L04A, using Z01 & Z02.
7

Window Assembly
8

Fix one L05A onto L01A and
the other one onto L04A, using Z02.

Fix W01 (4PCS) onto both ends of L05A, using Z04.
Widen the holes
into Dia 14mm,
using a reamer and
a power screwdriver.
Fix CX onto 01-L02A 10MM away from
the bottom, using Z03.
Fix the handle W02 onto window
profile 01-L02G, using Z02.
Cover all the holes with J01
10

PART
NO
QTY
PART
NO
CX
J01
HL
QTY
PART
NO
Y2
QTY
6
PART
NO
J03
QTY
L01A
2
2
1
4
2
8
3.97M
02-L02A
02-L02B
L04A
L11
6
6
S01
M6X35
M01
M02
8
6
6
Z01
M6X60
Z02
M4.2X16
Z03
12
32
4
M4.2X25
K2
11

Fix the wheels onto L01A (3PCS),
using S01 & M01.
Fix L01A * 2PCS onto 02-L02A using Z01.
12

1. Insert L11 into L04A as shown, and fix it with L04A using Z02;
2. Fix L04A onto 02-L02A as shown, using Z02.
Attention: Y2 must be placed into the channel of L04A and L01A
at the same time. Make sure all the panels are in the right position
before fixing Z02 tight.
Fix 02-L02B with L01A and L04A, using Z01 & Z02.
13

Fix L04A onto 02-L02B as shown, using Z02.
Attention:
Y2 must be placed
into the channel
of L04A/L01A
at the same time.
Make sure all the
panels are in the
right position
before fixing Z02.
Insert L11 into L04A as shown,
and fix it with L04A using Z02;
Fix 02-L02A with L01A and L04A, using Z01 & Z02.
Slide Rubber J03 into
the channel of 02-L02A.
14

Fix CX (2PCS) onto 02-L02A 10MM away from
the bottom, using Z03.
Cover all the holes with J01
15

PART
NO
QTY
PART
NO
CX
J01
HL
QTY
PART
NO
Y3
QTY
6
L01A
2
1
1
4
1
04-L02A
12
04-L02B
6
6
S01
M6X35
L04A
L08B
L11
M01
M02
1
8
6
6
Z01
M6X60
Z02
M4X16
Z03
K3-1
12
37
2
1
M4.2X25
K3
16

Fix the wheels onto L01A (3PCS),
using S01 & M01.
Fix L08B onto K3-1, using Z02.
Fix L01A * 2PCS onto K3-1 using Z01.
17

1. Insert L11 into L04A as shown, and fix it with L04A using Z02;
2. Fix L04A onto K3-1 as shown, using Z02.
Attention: Y3 must be placed into the channel of L04A and L01A at the same time.
Make sure all the panels are in the right position before fixing Z02 tight.
Fix 03-L02B with L01A and L04A, using Z01 & Z02.
18

Fix L04A onto 03-L02B as shown, using Z02.
Attention:
Y3 must be placed
into the channel
of L04A/L01A
at the same time.
Make sure all the
panels are in the
right position
before fixing Z02.
Insert L11 into L04A as shown,
and fix it with L04A using Z02;
Fix 03-L02A with
L01A and L04A,
using Z01 & Z02.
Cover all the holes with J01
19