MetalMaster S2266 User manual

INSTRUCTION MANUAL
SHST-1.6HD
Shrinker Stretcher - Heavy Duty
1.6mm Mild Steel
S2266
Page 1
Instruction Manual for SHST-1.6HD (S2266)
03/12/2014

Page 2
Instruction Manual for SHST-1.6HD (S2266)
03/12/2014

Page 3
Instruction Manual for SHST-1.6HD (S2266)
03/12/2014

3. Attach the Bar (39#) to the Footplate Bar (38#) using the Swivel Bolt (51#).
4. Thread the Swivel Bolt (54#) onto the upper end of the Bar (39#) inserting it to a
depth of approximately 38mm. Attach the Driving Handle (52#) to the upper Swivel
Bolt (54#) using the Pin (42#) and secure the Pin in place using a Split Pin (47#).
5. Connect the Bar (39#) and the Drving Handle (52#) with Pin (42#) and Split Pin (47#).
6. Attach the Frame (37#) and the Footplate Bar (38#) using the Spring (44#).
9. Periodically check to make sure all screws are tightly in place.
7. Assemble the Metal Shrinker & Stretcher to the Frame (37#) by using two Screws (49#)
and two Washers (50#).
8. Put the Driving Handle (52#) into the hole of the Back Block (4#) in the Metal Shrinke &
Stretcher.
Screw in about 40mm.
Page 4
Instruction Manual for SHST-1.6HD (S2266)
03/12/2014

Page 5
Instruction Manual for SHST-1.6HD (S2266)
03/12/2014

Part No. Description Qty Part No. Description Qty
1 Base 1 31 Shrinker Jaw 1 1
2 Spacer Tube 1 32 Shrinker Jaw 2 1
3 Shaft 1 33 Shrinker Jaw 3 1
4 Back Block 1 34 Shrinker Jaw 4 1
5 Back Shaft 1 35 Shrinker Hook 1
6 Front Block 1 36 Hex Head Wrench 4mm 1
7 Front Shaft 1 37 Frame 1
8 C-ring 10mm 2 38 Footplate Bar 1
9 C-ring 12mm 2 39 Bar 1
10 Lower Spring Fixing Set 1 40 Bushing 1
11 Spring 1 41 Pin 1
12 Upper SpringFixing Set 1 42 Pin 1
13 Washer 5mm 2 44 Spring 1
14 Screw M5X20 2 45 Chain 1
15 Stretcher Lower V-Block 1 46 Pin 1
16 Suspension Spring 4 47 Split Pin 4
17 Stretcher Jaw 1 1 48 Screw Ml0Xl6 2
18 Stretcher Hook 1 49 Screw M10X20 2
19 Stretcher Upper V-Block 1 50 Washer 10mm 4
20 Stretcher Jaw 2 1 51 Swivel Bolt M16 X120 2
21 Stretcher Jaw 3 1 52 Driving Handle 1
22 Stretcher Jaw 4 1 53 Hex Head Wrench 8mm 1
23 Screw M5X25 2 54 Swivel Bolt (levorotatory) 1
24 Lower Jaw Cover 2 55 Bottom Plate 1
25 Upper Jaw Cover 2 56 Screw M8X25 4
26 Screw M5X12 4 57 Nut M8 4
27 Screw M5X8 8 58 Spring Washer 8 mm 4
28 Screw M6X8 1 59 Washer 8 mm 4
29 Shrinker Lower V-Block 1 60 Nut M16 1
30 Shrinker Upper V-Block 1 61 Hex Head Wrench 5mm 1
Page 6
Instruction Manual for SHST-1.6HD (S2266)
03/12/2014

PARTS DIAGRAM
15
1
2
3
5
8
8
28 4
52
42
47
57
39
36
6
10
11
14
14
13
13
12
9
7
9
18
19 23
16
17
20
23
16
22
21
54
27
27
27 27
25
27
27
26
24
27
26
27
25
24
26
26
29
53
33
32
30
35
31
16
34
16
49
49
50
50
44
51
47
41
38
48
50
47
45
40
50 48
47
37
46
56 56 56 56
59
55
58
59
5758
Accessory
60
61
Page 7
Instruction Manual for SHST-1.6HD (S2266)
03/12/2014