Meyra Netti DYNAMIC AdaptPro User manual

UM0134 UK 2021-11
III HD
GMDN 41620 Patent EP 2836184
DYNAMIC AdaptPro
This product conforms to MDR
2017/745/EU for medical products.
User Manual

2 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
CONTENTS
1. INTRODUCTION 6
1.1 AREAS OF USE/INDICATIONS FOR NETTI DYNAMIC ADAPTPRO 7
1.2 CONTRA INDICATIONS 7
1.3 QUALITY AND DURABILITY 7
1.4 THE ENVIRONMENT AND WASTE DISPOSAL 7
1.5 INFORMATION FOR REUSE 8
1.6 ABOUT THIS MANUAL 8
1.7 VITAL MEASURES 9
2. QUICK REFERENCE 10
3. DESCRIPTION* 11
3.1 INFORMATION ABOUT NETTI DYNAMIC ADAPTPRO SYSTEM 12
3.2 OW THE NETTI ADAPTPRO FRAME WORKS 14
4. FEATURES OF NETTI Dynamic AdaptPro 16
4.1 ACCESSORIES 17
5. ASSEMBLING AND ADJUSTING 20
5.2 INITIAL ADJUSTMENTS TO THE USER  OVERVIEW 20
5.3 WHEELS ASSEMBLING 21
5.3.1 DRIVE WHEELS 21
5.3.2 FRONT FORK 22
5.3.3 FRONT CASTORS 22
5.3.4 FRONT CASTOR BEARING HOUSE DEPTH ADJUSTMENT 22
5.3.5 CORRECT FRAME ANGLE 23
5.3.6 MAIN WHEEL QUICK RELEASE 23
5.3.7 DRUM BRAKE ADJUSTMENT 24
5.3.8 OPERATING THE BRAKES 24
5.4 SEAT ASSEMBLING  WHEELCHAIR SEAT HEIGHT 25
5.4.1 SEAT HEIGHT  WHEEL POSITIONS 25
5.4.2 SEAT HEIGHT AT THE REAR 25
5.4.3 SEAT HEIGHT AT THE FRONT 26
5.4.4 NETTI SEAT PLATE  SEAT DEPTH ADJUSTMENTS 26
5.4.5 SEAT DEPTH  ADJUSTING AT THE REAR 27
5.4.6 SEAT DEPTH  ADJUSTING THE SEAT PLATE LENGTH  AT THE SEAT PLATE MIDDLE 27
5.4.7 SEAT DEPTH  ADJUSTING AT THE SEAT PLATE POSITION IN THE FRONT 28
5.4.8 DYNAMIC SEAT PLATE LOCK 29
5.5 CHAIR BACK ASSEMBLING AND POSITIONING 30
5.5.1 ADJUSTING THE VELCRO BACK 30
5.5.2 PLACING BACK SUPPORT CUSHION 30
5.5.3 BACK EXTENDER 31
5.6. ASSESSMENT AND CHOICE OF DYNAMIC BACK SUPPORT CYLINDER. 31
5.6.2 NETTI DYNAMIC FREE MOVEMENT BACK SUPPORT CYLINDER 32

3
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com
5.6.3 NETTI DYNAMIC ADAPTPRO 32
5.6.4 CHANGE OF RECLINE GAS CYLINDER 34
5.6.5 CHANGE OF TILT GAS CYLINDER 35
5.7 NETTI DYNAMIC HEAD SUPPORT ASSEMBLING AND POSITIONING 36
5.7.1 NETTI DYNAMIC C HEAD SUPPORT 36
5.7.2 NETTI DYNAMIC HEAD SUPPORT ADJUSTMENTS 36
5.8 ARM SUPPORTS ADJUSTING 37
5.8.1 ARM SUPPORTS HEIGHT  AT THE FRONT 37
ARM SUPPORTS HEIGHT  AT THE REAR 37
5.8.2 ARM SUPPORTS PAD DEPTH 37
5.8.3 ARM SUPPORTS HANDLING 38
5.9 BELTS AND HARNESSES 38
5.10 LEG SUPPORTS 41
5.10.1 LEG SUPPORT HEIGHT AND LENGTH ADJUSTMENTS 42
5.10.2 CALF SUPPORTS HEIGHT AND DEPTH ADJUSTMENTS 43
5.10.3 FOOTBOARD ANGLE ADJUSTMENT 44
5.10.4 ADJUSTMENTS FOR DIFFERENT LEG LENGTHS 44
5.10.5 LOCKING THE NETTI DYNAMIC DUAL LEG SUPPORT 46
5.10.6 LEG SUPPORT MOUNTING AND REMOVAL 46
5.10.7 FOOT PLATE LOCK 46
5.10.8 ANGLE ADJUSTABLE LEG SUPPORTS 47
5.10.9 GRANDIS LEG SUPPORTS 49
5.10.10 GRANDIS FIXED LEG SUPPORTS 51
5.11 SIDE SUPPORTS 52
5.12 ABDUCTION BLOCK 52
5.13 THIGH SUPPORT 52
5.14 TABLE 53
6. EVERYDAY USE OF NETTI DYNAMIC ADAPTPRO 54
SEAT UNIT ANGLE  TILT 54
BACKREST ANGLE  RECLINE 54
6.1 KEY WORDS REGARDING TILT AND RECLINE OF COMFORT WHEELCHAIRS 54
6.2 DECREASE THE POSSIBILITY OF SLIDING, SHEAR AND PRESSURE SORES: 54
6.3 OPERATING RECLINE: RECLINING THE CHAIR BACK 55
6.4 OPERATING TILT: TILTING THE SEATING UNIT 55
6.5 PRACTICE THE USE OF THE DYNAMIC SYSTEM TOGETHER WITH THE USER 56
6.6 TRANSFER TO AND FROM THE WHEELCHAIR 57
6.7 USING A PATIENT HOIST: 57
6.8 DAILY ATTENDANT HANDLING 58
6.8.1 PUSH BOW 58
6.8.2 ANTITIPS 58
6.8.3 BRAKES 58
6.8.4 ARM SUPPORTS 59

4 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
6.8.5 HEAD SUPPORTMOUNTING 60
6.8.6 LEG SUPPORT  MOUNTING 60
6.8.7 LEG SUPPORT FOOT BOARD 61
6.8.8 LOCKING DYNAMIC LEG SUPPORTS 61
6.9 BELTS AND HARNESSES 62
7. TRANSPORT 63
7.1 TRANSPORT IN CAR 63
7.2 FOLDING FOR TRANSPORT 64
7.3 TRANSPORT IN AIRPLANE 64
7.4 TRAVELLING ON PUBLIC TRANSPORT 64
8. MANOEUVRING 65
8.1 GENERAL TECHNIQUES 65
8.2 DRIVING TECHNIQUES  STEP UP  66
8.3 DRIVING TECHNIQUES  STEP DOWN 66
COMPANIONS, DRIVE DOWN A STEP FORWARDS: 66
8.4 DRIVING TECHNIQUES  SLOPE  66
8.5 DRIVING TECHNIQUES  UP STAIRS  67
8.6 DRIVING TECHNIQUES  DOWN STAIRS  67
8.7 TRANSFER 68
8.8 POINT OF BALANCE 68
8.9 LIFTING THE WHEELCHAIR 69
8.10 PUSH RIM 69
10. MAINTENANCE 70
10.1 MAINTENANCE INSTRUCTIONS 70
10.2 CLEANING AND WASHING 70
10.3 LONG TERM STORING 71
11. TROUBLESHOOTING 72
12. TESTS & WARRANTY 73
12.1 TESTS 73
12.2 WARRANTY 73
12.3 CLAIM 73
12.4 NETTI CUSTOMISED / INDIVIDUAL ADAPTATIONS 74
12.5 COMBINATIONS WITH OTHER PRODUCTS 74
12.6 SERVICE AND REPAIR 74
13. MEASUREMENTS & WEIGHT 75

5
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com

6 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
1. INTRODUCTION
Netti Dynamic AdaptPro is a tilt and recline
wheelchair with dynamic seating system for
adolescent and grown up users meant for mainly
indoor and some outdoor use. It is tested to DIN EN
12183:2014. The tests were carried out by TÜV SÜD
Product Service GmbH in Germany.
In Alu Rehab we believe that wheelchairs should
be chosen based on a thorough assessment
focusing on the needs of the user and demands
from environment. It is vital to be aware of the
possibilities and limits the wheelchair oers.
Netti Dynamic AdaptPro is a wheelchair designed for
users with great need of comfort and adjustments.
It has an adjustable seat and back angle, thus
facilitating for the user change of position,
mobilisation or posture correction (stabilization).
Netti Dynamic AdaptPro is a tilt and back recline
wheelchair that allows for controlled «Open Kinetic
Chain» OKC movements for the user when the
dynamic functions are activated
Netti Dynamic AdaptPro has been crash tested
at TASS International test centre in Helmond
Netherlands, according to ISO 7176-19:2008
Max user weight is 135 kg, also when used as a
seat in a car.
When mounting accessories such as power kit
etc, the weight of the accessories must be
subtracted from the max user weight.
Specications varies between countries.
Netti Dynamic AdaptPro wheelchair is
identied in the Global Medical Device
Nomenclature GMDN 41620
Wheelchair attendant/occupant driven, rear
wheels driven, non-collapsible.

7
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com
1.1 AREAS OF USE/INDICATIONS FOR
NETTI DYNAMIC ADAPTPRO
Netti Dynamic AdaptPro is a tilt and recline wheelchair
for wheeled transport for partially or fully immobile
adolescent and grown up persons with physical
and/or mental disabilities who may also suer from
involuntary movements. Netti Dynamic AdaptPro
allows controlled Open Kinetic Chain (OK-C)
movements of the user. Static comfort wheelchairs
can be accommodated with dynamic components.
The controlled OK-C movement results in: the distal
segments can move, with a moderate resistance,
OK-C helps to gain control of the proximal segments,
especially when the user cannot inhibit muscle
movements due to their medical condition. Netti
Dynamic AdaptPro has a modular system that can be
customized and adjusted according to the user’s need.
Netti Dynamic AdaptPro may be used for wheelchair
users with involuntary movements.
Examples of involuntary movements are:
• Dystonia (involuntary, sustained or intermittent
muscle contractions that can cause twisting and
repetitive movements, abnormal posture or both.
Muscle tone varies from normal or hypotonia to
hypertonia.
• Athetosis (slow, involuntary writhing movement)
• Chorea (brief, irregular jerking movements)
• Tremor (rhythmic movement of part of the body)
• Hemiballism(These are wild inging/throwing
movements of one arm or leg, usually occurring as a
result of a cerebrovascular event)
• Clonus (rapid muscle jerks that are frequently
repetitive
IMPORTANT BENEFITS of Netti Dynamic AdaptPro
• The wheelchair adapts to the movements of the
user.
• The user will have less discomfort during spasm as
the wheelchair supports the movement.
• After an involuntary movement the user returns to
the original sitting position securing a good position
and pressure distribution.
• It increases the quality of movements.
• It prevents the user from sliding forward in the chair
and thereby getting a incorrect sitting position and
inadequate distribution of pressure.
• Extends the lifetime of the wheelchair
Before using Netti Dynamic AdaptPro, a
seating assessment should be carried out by
a trained professional.
1.2 CONTRA INDICATIONS
Netti Dynamic AdaptPro does also function as a
static wheelchair when the Dynamic functions are
locked.
• If the user has blood pressure falls, the dynamic
system should be locked / not be used
• If the user has vertigo, the dynamic system
should be locked / not be used
1.3 QUALITY AND DURABILITY
The Netti Dynamic AdaptPro wheelchair is tested
at TÜV SÜD Product Service GmbH in Germany,
following the European Standard
DIN EN 12183:2014.
As manufacturer, Alu Rehab A.S
evaluates the test to be equal to
5-6 years of normal use of the chair.
The disability of the user, the toughness of use as
well as the level of maintenance done, foremost
decides the durability of the wheelchair. Thus,
the durability will vary depending on these three
factors. With adequate maintenance, the lifetime
of the wheelchair can be expected to exceed the 5
year warranty period by many years.
1.4 THE ENVIRONMENT AND WASTE
DISPOSAL
Alu Rehab and its suppliers wish to
protect the environment.
This means:
• That we avoid using
environmentally harmful
substances and processes to the greatest extent
possible.
• That Alu Rehab’s products are ensured a long
service life and a high degree of exibility - to
benet the environment and economy.
• That all packaging can be recycled.
• That the wheelchair was designed to be
separated into its component materials - to
make recycling easier.
Contact your local recycling agent to get
correct information how to handle in your
area.
TEMPERATURE RANGE
Netti Dynamic AdaptPro wheelchair is
designed for temperature range of
-10°C to +40°C

8 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
1.5 INFORMATION FOR REUSE
All products from Alu Rehab are designed to give
years of little maintenance service. All products
can be adapted for re-use by an authorised dealer.
In order to guarantee performance and safety, Alu
Rehab recommends the following tests prior to any
re-use.
Please examine the following components for
function, integrity etc. and replace parts if necessary:
• Wheels (tyre tread) and quick release
• Wheelchair frame
• Front castors and quick release
• Hubs
• Brake function
• Directional stability of wheels
• Bearings: test for wear and lubrication.
• Cushions
• Leg supports
• Arm supports
• Recline / tilt function
• Push bar / handles
• Anti tip
If electrical functions are mounted, please check:
• Batteries - may need to be replaced
• Control box
• Charging point and all connectors
• Joystick
• Electrical functions of all actuators
For hygienic reasons: please replace the head
support / cover for a new user.
Please also note the contents of Section 10.2
Cleaning and care
A refurbishment manual for Netti Wheelchairs
can be downloaded at My-Netti.com
A recycling manual for Netti Wheelchairs can
be downloaded at My-Netti.com
1.6 ABOUT THIS MANUAL
In order to avoid damages while using the Netti
Dynamic AdaptPro wheelchair, please read this
manual carefully before starting to use the chair.
Symbol of forbidden actions.
No warranty can be claimed whenever
these actions are implemented.
Symbol of warning.
Whenever this symbol is used,
caution has to be taken.
Symbol for important information.
Symbol for useful tips.
Symbol for tools.
7
°Symbol for:
Max safe slope for hand brake.
Max.
135 kg
Symbol for: Max user weight.
Medical Device
Manufacturer - Name and address
Date of manufacturing
Serial number
Read user instruction
Please note that this manual is updated according to
the year and date stated on each page.
User Manual on web - My-Netti.com
For enhanced readability ( advantageous for users
with visibility challenges) please nd our user
manual on our web page: www.My-Netti.com -
manuals - user manual Netti Dynamic AdaptPro.
Latest user manual updates, product safety notes,
addresses and other product information like recalls
etc. will be published on our web page.

9
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com
1.7 VITAL MEASURES
Netti Dynamic AdaptPro is a comfort, dynamic
wheelchair designed for mainly indoor use, it can
be used outdoor on smooth and level ground.
Min. dimensions in table refer to seat width 350
mm. Max dim refers to seat width 450 mm.
Specications varies between countries.
Total weight: 53 Kg
(450 mm width chair)
Seat width 350, 380, 400, 430, 450 mm
(8mm less room between arm support pads):
Seat depth:
From back Velcro to front of seat plate:
By sw 350-400 mm:
(*355) 380, 405, 430, 455 mm
By sw 430-450 mm:
(*405) 430, 455, 480, 505 mm
(*Minimum seat depth with the chair-back in
forward mounted position)
Seat height: 415 mm*
(From oor to top seat plate using
24”main wheels in third hole position) -
*By changing position of main wheels, it is
possible to achieve seat height of 445 mm. Other
seating heights can be reached by changing
wheel dimensions and wheel brackets.
Backrest height: 515 mm*
* Using the back rest extender gives
610 mm backrest height including back cushion.
** For Netti Dynamic AdaptPro with seat width
500 mm and more, the overall width exceeds
recommended 700 mm.
*** Least stable and most stable refers to the
positioning of the anti-tippers. Always use anti-
tippers driving uphill.
Specicaon min. max.
Overall length with leg rest
- horizontal seat, back and leg
supports vercal.
Max length: lt 30 degree
include push bow
1280 mm 1600 mm
Overall width =
seat with + 283 mm **
582 mm 682 mm
Folded length - ex leg supports 800 mm 800 mm
Folded width (removed wheels) 538 mm 638 mm
Folded height (removed
wheels, cushions, arm-, head- +
leg-support)
715 mm 715 mm
Total mass - all inclusive 50,5 kg 53,5 kg
Mass heaviest part: frame 35 kg 37 kg
Mass heaviest component: le
DUAL leg support
3 kg 4 kg
Stac stability downhill 0° 13º
Stac stability uphill*** 0° 13°
Stac stability sideways 15° 15°
Safe slope, use an-pper 0° 7°
Seat plane angle -0º 30º
Eecve seat depth 380 mm 505 mm
Eecve seat width 340 mm 440 mm
Dynamic Seat surface height
at front - max with change of
wheel posion
415 mm 507 mm
Backrest angle 86º 133º
Backrest height ex cushion 515 mm 625 mm
Foot board to seat distance 280 mm 560 mm
Leg to seat surface angle 99º 180º
Arm support to seat distance 265 mm 377 mm
Front locaon of arm support
structure
408 mm 450 mm
Push rim diameter 540 mm 540 mm
Horizontal axle locaon -10 mm 95 mm
Parking brake Max slope - 7°
Minimum turning radius, with-
out leg supports
R 500 mm R 560 mm
Model with 24” main wheels. Measured without
cushions.

10 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
2. QUICK REFERENCE
The content of this page is a summary of the whole
manual. It gives you a brief introduction to the use
and care of the Netti Dynamic AdaptPro wheelchair.
The quick reference is not a replacement for
the manual, only a reminder/check list.
• Unpack the wheelchair (Chapter 5.1)
• Mount the main wheels (Chapter 5.3)
• Mount the front castors (Chapter 5.3)
• Rise the back rest and mount the recline gas strut
to the back rest using the locking bolt.
(Chapter 5.5)
• Adjust the arm supports (Chapter 5.7)
• Mount the cushions (Chapter 5.4 and 5.5)
• Mount the leg supports (Chapter 5.9)
• Adjust the push bow (Chapter 6.6)
• Mount the head support (Chapter 5.6)
• Mount accessory. (See chapter 5 for more
information. Mounting descriptions will follow the
accessory.)
• If electrical functions are mounted:
Connect the battery and start electrical functions
ADJUST THE WHEELCHAIR TO THE USER:
Adjust seat depth and eventually the
wheelchair balance, foot board height,
armrest height, head support height and
depth, chair back cushion height.
For more information about adapting the wheelchair
to the user please see
www.My-Netti.com knowledge and tools
For troubleshooting, see chapter 11.
For adjustments see chapters 5.
ANTITIP The rearward position of the
anti-tips are dened and placed in relation
to the drive wheels. They will follow the drive
wheels independently from which tilt angle
is used. This will secure the chair from tipping
backwards at any time.
Drive carefully!
Be aware that friction against pushrims can
create a warm surface.
Surface temperature of metal parts in frame
structure might increase when exposed to
direct sunlight.
Salt water can increase risk of corrosion.
Further precautions related to environmental
conditions not needed.
The anti-tips are always used for the safety of
the user.
When the chair is tilted rearwards, the
anti-tips are automatically moved backwards,
the brakes must always be used when leaving
the user in the backwards tilted position.
Be sure to lock all handles properly.
Watch out for pinching danger when folding
and unfolding, tilting, reclining and all other
adjustment movements.
If electrical functions are mounted:
Charge the battery daily.
If the chair has pneumatic tires: Make sure to
check tyre pressure every week and inate to
keep 24”at 45 PSI, and 7”at 36 PSI
Never stand on the foot plates due to risk of
tipping forwards.
Never lift the wheelchair by the leg supports,
arm supports or head support.
Product conguration may vary between
dierent countries.
Illustrations may dier from the delivered
product.
For visually impaired people, manuals and
catalogues can be downloaded at
www.My-Netti.com
If in doubt - contact your dealer!

11
27
26
15 16
17
18
20
21
22
23
24
1
2
3
4
5
6
7
8
9
10
11
12 13 14
25
28
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com
3. DESCRIPTION*
1. Head support
2. Back rest cushion - model Stabile
3. Arm support with pad
4. Seat cushion
5. Knee pad
6. User brake right
7. Bearing house/front fork fastening
8. Quick release for front fork
9. Front fork
10. Front castors
11. Foot board lock
12. Foot board
13. Calf support
14. Angle adjustment screw
15. Height adjustment screw
16. Leg support bracket
17. Anti-tip
18. User Brake - parking brake
20. Quick release axle
21. Push ring
22. Main wheel
23. Name plate Wheelchair
on lower back cross bar.
24. Release handle for
arm support
25. Attendant drive brake
26. Release handle for push bow
27. Push bow
28. Head support height handle.
Lifting points
Be aware that specications may vary between countries.
If any of these parts are missing, please contact your dealer.
For complete information, please contact your dealer.

12
365
30 degree max tilt.
465
My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
3.1 INFORMATION ABOUT NETTI
DYNAMIC ADAPTPRO SYSTEM
Netti Dynamic AdaptPro is an advanced mobility aid
incorporating 2 Netti patented solutions:
n advanced AdaptPro frame with large tilt span
n advanced dynamic system.
Tilt range:
The patented Netti AdaptPro wheelchair frame
allows for extensive tilt range from 5° forwards to 45°
backwards. The innovative frame structure adapts to
the tilt angle by moving the main wheels backwards
ensuring that the gravity point always stays within
the footprint of the wheels. This ensures the stability
of the wheelchair in any tilted position. The anti-tips
follow the main wheels and are therefore always
keeping the anti-tip security.
Manoeuvrability:
Netti AdaptPro has a very short wheel base of
365 mm when 5° forward tilt is used, ensuring easy
manoeuvring in narrow spaces. The wheel base
increases up to 465 mm when the chair is tilted 30°
backwards.
Netti Dynamic AdaptPro is developed for users
aected by involuntary movement. It incorporate
the patented Dynamic System which is developed
for users with extensive movement patterns
resulting in strong spasms and contractions of the
user’s musculoskeletal apparatus causing joint
dislocations, involuntary movements,
sliding, loss of function and also
challenging the strength of the
wheelchair.

13
A
B
D
E
F
G
C
The Illustration show all dynamic
movements with max 30 degree tilt.
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com
The patented Netti Dynamic System accommodates
the user’s extension movements letting the wheelchair
work in synergy with the user’s movements. When
accommodating the involuntary movements, muscle
tone and frequency of involuntary movements could be
reduced. The wheelchair is dynamic and will follow the
user’s movements of both upper and lower body.
IMPORTANT BENEFITS:
nThe wheelchair adapts to the movements of the user.
nThe user will have less discomfort during involuntary
movement as the wheelchair supports the movement.
nAfter an involuntary movements the user returns to
the original sitting position securing a good position
and pressure distribution.
n It improve quality of movements.
n It prevents the user from sliding forward in the
chair and thereby getting a bad sitting position and
inadequate distribution of pressure.
n Extends the lifetime of the wheelchair.
NETTI DYNAMIC SYSTEM allows for Open Kinetic Chain
movements (OK-C):
n Foot movements A
n Ankle movements B
n Knee movements C
n Hip movements D
n Pelvic movements E
n Back movements F
n Head movements E
Before using Netti Dynamic System
NDS or any of its components a seating
assessment should be carried out by a
trained professional
Netti Dynamic System is a modular system
that can be customized and adjusted
according to the user’s need
Pelvic stabilizer / hip-belt and Shoe
shells / ankle huggers are required.

14 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
3.2 HOW THE NETTI ADAPTPRO FRAME
WORKS
Netti Dynamic AdaptPro frame is a patented frame
construction with innovative tilt and recline functions.
It has been developed as an answer to the users seemingly
adverse requests for a very large tilt range, without
expenses of reduced stability and manoeuvrability. It is
also covering the need for low seating height for users
that use their feet to move the wheelchair by tripping.
The solution is a dynamic wheelchair frame that have a
short wheel footprint at upright sitting position - allowing
for very good manoeuvrability in narrow space - while it
increases the footprint as soon as the seating tilt function
is used. This allows the centre of gravity of the chair to stay
well within the wheels footprint at any tilted position -
which lead to very good stability at any time.
As an additional safety feature, the anti-tips follow the
backwards movement when the tilt function is activated.
Tilt range:
The patented Netti AdaptPro wheelchair frame allows for
extensive tilt range. On the Netti Dynamic AdaptPro it is
set from 5° forwards to 30° backwards.
THE TILT FUNCTION
is operated from the tilt handle at the left side on push
bow. The tilt and the recline handles are an innovation of
itself, opening the tilt function by grabbing around
the handle and rotating them.
TO OPERATE:
• Turn the tilt handle towards you and put
pressure to the push bar to tilt up or down.
The seating unit remains tilted in the position
where you let the tilt handle loose.
The tilt handle operates 2 tilt gas cylinders
sitting under the seat frame. via Bowden
control cables. The 2 gas cylinders are
operated simultaneously.
The tilt cable from the tilt handle goes to a
splitbox sitting on the frame. From the split box
2 wires - one to each cylinder are operated.
Tilt cylinder adjustments see chapter 5.6

15
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com
THE RECLINE FUNCTION
is operated from the recline handle at the right side on
push bow.
THE RECLINE HANDLE ALSO OPERATES THE
DYNAMIC BACK FUNCTION.
The Dynamic function is open / active when the
indicator-line aligns with the open lock symbol.
The Dynamic function is closed when the indicator-
line aligns with the closed lock symbol.
The chair back can be reclined and locked in any angle
when the dynamic function is not active / open.
As default the dynamic functions are locked with no
dynamic back function.
ACTIVATING THE DYNAMIC FUNCTION:
• Turn the handle backwards - all the way down to
where the indicator line aligned with the open lock.
The recline handle automatic clicks in and stays in the
open position - the dynamic back is activated. This
action will move the back support to a ca 90 degree
angle referring to the seat plate. The user is now free to
push the back support backwards and will be assisted
to return to the upright position.
STOPPING THE DYNAMIC FUNCTION:
• Rotate the recline handle slightly backwards.
• Press the little handle on the left directly by the
recline handle.
• The dynamic function is stopped and the recline
handle rotates to the position where the indicator-
line aligned with the locked symbol.
LOCKING THE RECLINED BACK:
• Rotate the recline handle all the way backwards.
• Move the back to desired recline position and hold.
• Press the little handle on the left direct by the
recline handle. The rotating handle returns to where
the indicator line aligns with the lock symbol.
• The recline angle is locked.
Recline / dynamic gas cylinder adjustments see
chapter 5.6

16 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
STANDARD
SEAT
• Netti Sit cushion Cushion with good pressure
distributing properties
• Tilt 0° to +30°
• Adjustable height 417 mm to 445 mm by change of
wheel size and position
• Adjustable depth from 380 - 505 mm
• Dynamic seat plate (See chapter 5)
WHEELS*
• 24”x 1”PU main wheels with quick release axle and
drum brake -
• Push rim: Aluminium
• 7”Puncture proof front castors with quick release
• Frame extension and cross bar for increased stability
Standard main wheels may vary between countries
PUSH BOW
• Height adjustable, swing-able
BRAKES 
• Attendant and user drum brakes
ANTITIP  LONG
• Automatic following the main wheel position
SW 300-400 low anti-tip, 450-500 high anti-tip
BACK REST  NETTI SMART
• Angle: 86° - 133°
• Height: 500 mm
• Back rest cushion with integrated lumbar support
and side support, height adjustable
• Pelvic stabilizer - 2 point hip belt
LEG SUPPORT
• DUAL Dynamic leg supports, swing-able, removable
• Height- and angle adjustable foot-board with ankle
huggers
• Calf supports and knee upholstery
ARM SUPPORT
• Height adjustable
• Swing away
• Depth adjustable pads
• Finger protection
HEAD SUPPORT NETTI RELAXO
• Height and angle adjustable
• Removable
OPTIONS /ACCESSORIES
SEAT
• Solid seat plate
• Trays & reading stand for trays(Se e chapter 5)
• Hip belts and 4 point belts harnesses
(See chapter 5)
WHEELS
• 16” Puncture proof wheels with drum brake
• Pneumatic front castors (See chapter 5)
• Spoke protectors (See chapter 5)
• Frame extender - increased stability
• Extender with height adjustment
• Push rims (See chapter 5)
BACK REST
• Back rest extension integrated in the back
(See chapter 5)
• Back rest cushions - dierent models
LEG SUPPORTS
• Grandis angle adjustable
• Grandis xed angle
• Knee and thigh support (See chapter 5)
ARM SUPPORT
• Dierent pads (See chapter 5)
• Hemi armrest and Hemi cushion
(See chapter 5)
NETTI HEAD SUPPORTS
• Height, depth and angle adjustable - several
models.
• Removable
• Dynamic function on Dynamic model
4. FEATURES OF NETTI Dynamic AdaptPro

17
inf[email protected]m
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com
4.1 ACCESSORIES
The anytime updated complete
accessory program is found on our web
page www.My-Netti.com
Not all accessories are available for
all wheelchair congurations. Please
check the home-page or ask customer
service for further details.
Belts
Several models:
Hip belts with or
without upholstery
and with plastic lock
or car lock.
H-Belt attachment rack
To be mounted on to the
push bow brackets.
Trays
3 models:
Swing-able lockable and
standard“push on”. To be
used with care as the table
follows the arm pads which
swing with the chair back.
Upholstery for tray
Oers a soft base for
the arm resting on the
tray.
Wedge
Increases side support.
Lumbar support
Increases lumbar curvature.
Back rest Cushions
Many to choose from.
Please contact your
dealer.
Seat Cushions
Many to choose from.
Please contact your
dealer.
Leg supports:
Grandis angle adjustable
Grandis xed angle
Adjustable in xed positions
between 33° to 105° using an
Allen key.
Grandis extension piece
Required for mounting of any
Grandis leg supports

18 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
Knee / Thigh support
The support reduces
adduction.
Abduction block
The block reduces
abduction.
Small: 80 mm width
Medium 110 mm width
Large: 140 mm width
Head supports
Support A Side support
also available with
forehead strap
Support B Small
Support C Large
Support D comfort
pressure distributive
Support E adjustable
side supports
Support F with cheek/chin
support band
Support Relaxo
Head cushion
400 x 400 mm cushion with
Kospoex lling and rubber
Head cushion
Comfort
Cushion with Kospoex
lling to pull onto
head rest.
Hygiene cover
Protects the core of the
head support.
Hemi cushion
A more accommodating
support than the hemi arm
support.
Arm support pads
Wide: 385 x 58 mm
Side support Correction
Meant for correction of
unfavourable postures in the
upper trunk.
Cloth protector

19
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11 My-Netti.com
Foot board with lock
The leg supports can
be swung to the side
like standard leg
supports.
Upholstery for calf
support bracket
Reduces pressure.
Frame Cross bar
Increased sidewards stability
Main wheels
available in sizes:
16”with drum brake
24”with drum brake.
Puncture proof Flexel or PU
or pneumatic. Ination
pressure is clearly marked
on pneumatic tyres 45 psi.
Wheel frame extender
60 mm rearward position
for the main wheels.
Wheel frame extender
for rearward and height
adjustment
Front wheels / castors
available in sizes:
6”and 7”
Spoke protectors
For 24”.
Black or transparent is
optional.
Push rims
Aluminium: 24”
Friction push rim
24”
Tool kit

20 My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
5. ASSEMBLING AND
ADJUSTING
5.1 UNPACKING
(See chapter 5 & 6 for details for mounting)
• 1. Unpack all the parts, and check that
everything is delivered according to the
packing list.
• 2. Mount main wheels and front castors.
• 3. Mount back rest, arm supports, cushions and
leg supports.
• 4. Mount accessories.
Weight of components (450 mm chair width):
Drive wheels: 1,7 kg each
Front castors: 0,9 kg each
Leg support DUAL left.: 2,8 kg
Leg support DUAL right: 2.1 kg
Netti Stabile Back: 1,4 kg
Netti Sit: 1 kg
Netti Dynamic Head support 3 kg
or Head support C: 1,1 kg
Necessary tools are described under each
chapter.
Accessories described in chapter 4 are a
presentation of options, and will be
delivered with separate mounting
descriptions.
When seating and wheel adjustments are
done in the possible positions by standard
equipment, the adjustments will not exceed
safe limits.
5.2 INITIAL ADJUSTMENTS TO THE USER
 OVERVIEW
Start with user sitting in a normal upright position.
SEAT ADJUSTMENTS  BALANCING THE CHAIR
It is vital to adjust the seat correct.
Adjustments to the seat change the centre of gravity
which eects the balance of the wheelchair.
Proper adjusted seat provide stability and the ability
to manoeuvre the wheelchair, even during a max
extension of the dynamic parts of the wheelchair.
F
Correct seat depth
depends on the user’s thigh length and is
measured while seating - see the red horizontal
arrow on the illustration.
• Seat depth can be adjusted on the back of the
chair by moving the back brackets followed by
adjusting the back cylinder position.
• Seat depth can be adjusted on the middle of the
chair by extending or shortening the seat plate.
• Seat depth can be adjusted in the front by
adjusting the position for the front of the seat
plate.
The extension pieces where the leg supports are
mounted, can in addition be positioned more
forward for adjusting to unequal long legs.