MHC Medical Products SureLife Premium SL-BW102V User manual

Talking Wrist Blood Pressure Monitor
Premium Model
2

Premium Model
•
Infants, young children or individuals who cannot
express their consent are not suitable to take blood
pressure measurement.
•
Individuals with serious arteriosclerosis are not suitable to
take blood pressure measurement.
•
Blood pressure readings may change in case of pregnancy.
Pregnant women should consult their doctor before
taking measurement.
•
Self-measurement is not medical treatment. If there are
unusual values, consult your doctor.
•
Handling batteries properly:
°As soon as old batteries run out, replace with
new batteries.
°Do not use old and new batteries together.
°Align the polarities of batteries correctly.
°When the unit will not be used for more than 3 months,
remove the batteries. Otherwise, batteries may leak and
cause damage to the unit.
SAFETY PRECAUTIONS
2 3

QUICK START GUIDE
Avoid smoking, eating, drinking caeinated drinks
or exercising for 30 minutes before taking measurement.
1. Sit upright in a chair at a table with
both feet on the oor.
2. If necessary, roll up your sleeve to
bare your wrist. Take caution not to
constrict the blood ow.
3. Secure the cu with the display on
the inside of your wrist. Place your
elbow on the table so that your
wrist is level with your heart.
4. Press the power button “ ”. The cu will automatically
inate and the measurement will begin. Do not talk during
the measurement process.
2 3 4

(1-99 readings)
OVERVIEW
3 4 5
Features
•
One Touch Operation
•
Irregular Heartbeat Detector
•
Blood Pressure Mode and Clock Mode
•
4 User / 396 Total Memory
•
4 Alarm Clock Settings
•
5 Mode Averaging Function—
Hour, Day, Week, Month and Overall
•
Auto-o Power Saving Feature
•
Operated by 2 AAA batteries
Monitor
Display Sticker
Note: Peel o and remove display sticker before use

PREPARATION
2.1 Battery Installation
1. Remove the battery cover according
to the direction of the arrow.
2. Insert 2 AAA batteries with the
polarities in the correct direction.
3. Slide the battery cover to
close until the lock securely
clicks into place.
Note: Replace batteries when the battery
indicator “ ” shows low voltage.
4 5
*Enlarged to show correct battery direction

2.2 Date & Time Setting
The SureLife® Talking Wrist Blood Pressure Monitor has a
built-in clock function. Activating the clock function allows
the exact date and time of measurements to be recorded in
the device’s memory.
Note: The Date & Time is turned o by the factory and may be
turned on, at the user’s discretion, using the instructions
below. Date & Time will also need to be reset after
installing new batteries.
1. Press and hold the “ AVG” button for ve seconds to enter
Date & Time Mode.
2. SET YEAR:
Press the “ MEMO” or “PAGE ” button to select
current Year. Press the “ AVG” button to conrm.
3. SET MONTH:
Press the “ MEMO” or “PAGE ” button to select
current Month. Press the “ AVG” button to conrm.
4. SET DAY:
Press the “ MEMO” or “PAGE ” button to select
current Day. Press the “ AVG” button to conrm.
5. SET HOUR:
Press the “ MEMO” or “PAGE ” button to select
current Hour. Press the “ AVG” button to conrm.
6. SET MINUTE:
Press the “ MEMO” or “PAGE ” button to select
current Minutes. Press the “ AVG” button to conrm.
7. Press the “ MEMO” or “PAGE ” button to turn the
Clock Function “ON” or “OF”. Press the “ AVG”button
to conrm.
Note: If you select Clock Function “ON”, you will continue at
the Alarm Setting section. Otherwise, setting will end.
If clock setting is turned on, the unit will power o after
1 minute of inactivity.
2.3 Alarm Setting
Note:
•
To use the Alarm Setting, the Clock Function must be set to
“ON”. See section 2.2 (Date & Time Setting) for instructions.
•
You can set up to 4 alarms.
8. DISABLE ALARM:
To Disable the 1st alarm, press the “ MEMO” or “PAGE ”
button to select “OF”. Press the “ AVG” button to conrm
then Proceed to Step 12.
9. SET ALARM:
To Set the 1st alarm, press the “ MEMO” or “PAGE ”
button to select “ON”. Press the “ AVG” button to conrm.
10.Press the “ MEMO” or “PAGE ” button to select desired
Hour. Press the “ AVG” button to conrm.
11.Press the “ MEMO” or “PAGE ” button to select desired
Minute. Press the “ AVG” button to conrm.
12.Follow the same steps for the 2nd, 3rd and 4th alarm.
2
7
6
Note:
•
Press the “ ” button anytime during clock setting/alarm
setting to start over if an error occurs.
•
Each alarm clock lasts 45 seconds, or you can turn it o by
pressing the “ ” button.
2.4 Language/Sound Setting
When a measurement is completed, the results will read aloud;
the systolic value, diastolic value and pulse. The default
language is English.
To Change the Language Format:
1. Press and hold the“ MEMO” button until the screen
displays [LLLx] (x=0~3), then release the button.
2. Press the “ MEMO”button to select language.
Numbers 0~3 represent the following languages:
0Mute 2French
1English 3Spanish
3. Press the“ ” button to conrm the selection and
begin measurement.

2.2 Date & Time Setting
The SureLife® Talking Wrist Blood Pressure Monitor has a
built-in clock function. Activating the clock function allows
the exact date and time of measurements to be recorded in
the device’s memory.
Note: The Date & Time is turned o by the factory and may be
turned on, at the user’s discretion, using the instructions
below. Date & Time will also need to be reset after
installing new batteries.
1. Press and hold the “ AVG” button for ve seconds to enter
Date & Time Mode.
2. SET YEAR:
Press the “ MEMO” or “PAGE ” button to select
current Year. Press the “ AVG” button to conrm.
3. SET MONTH:
Press the “ MEMO” or “PAGE ” button to select
current Month. Press the “ AVG” button to conrm.
4. SET DAY:
Press the “ MEMO” or “PAGE ” button to select
current Day. Press the “ AVG” button to conrm.
5. SET HOUR:
Press the “ MEMO” or “PAGE ” button to select
current Hour. Press the “ AVG” button to conrm.
6. SET MINUTE:
Press the “ MEMO” or “PAGE ” button to select
current Minutes. Press the “ AVG” button to conrm.
7. Press the “ MEMO” or “PAGE ” button to turn the
Clock Function “ON” or “OF”. Press the “ AVG”button
to conrm.
Note: If you select Clock Function “ON”, you will continue at
the Alarm Setting section. Otherwise, setting will end.
If clock setting is turned on, the unit will power o after
1 minute of inactivity.
2.3 Alarm Setting
Note:
•
To use the Alarm Setting, the Clock Function must be set to
“ON”. See section 2.2 (Date & Time Setting) for instructions.
•
You can set up to 4 alarms.
8. DISABLE ALARM:
To Disable the 1st alarm, press the “ MEMO” or “PAGE ”
button to select “OF”. Press the “ AVG” button to conrm
then Proceed to Step 12.
9. SET ALARM:
To Set the 1st alarm, press the “ MEMO” or “PAGE ”
button to select “ON”. Press the “ AVG” button to conrm.
10.Press the “ MEMO” or “PAGE ” button to select desired
Hour. Press the “ AVG” button to conrm.
11.Press the “ MEMO” or “PAGE ” button to select desired
Minute. Press the “ AVG” button to conrm.
12.Follow the same steps for the 2nd, 3rd and 4th alarm.
2 3
76 8
Note:
•
Press the “ ” button anytime during clock setting/alarm
setting to start over if an error occurs.
•
Each alarm clock lasts 45 seconds, or you can turn it o by
pressing the “ ” button.
2.4 Language/Sound Setting
When a measurement is completed, the results will read aloud;
the systolic value, diastolic value and pulse. The default
language is English.
To Change the Language Format:
1. Press and hold the“ MEMO” button until the screen
displays [LLLx] (x=0~3), then release the button.
2. Press the “ MEMO”button to select language.
Numbers 0~3 represent the following languages:
0Mute 2French
1English 3Spanish
3. Press the“ ” button to conrm the selection and
begin measurement.

2.2 Date & Time Setting
The SureLife® Talking Wrist Blood Pressure Monitor has a
built-in clock function. Activating the clock function allows
the exact date and time of measurements to be recorded in
the device’s memory.
Note: The Date & Time is turned o by the factory and may be
turned on, at the user’s discretion, using the instructions
below. Date & Time will also need to be reset after
installing new batteries.
1. Press and hold the “ AVG” button for ve seconds to enter
Date & Time Mode.
2. SET YEAR:
Press the “ MEMO” or “PAGE ” button to select
current Year. Press the “ AVG” button to conrm.
3. SET MONTH:
Press the “ MEMO” or “PAGE ” button to select
current Month. Press the “ AVG” button to conrm.
4. SET DAY:
Press the “ MEMO” or “PAGE ” button to select
current Day. Press the “ AVG” button to conrm.
5. SET HOUR:
Press the “ MEMO” or “PAGE ” button to select
current Hour. Press the “ AVG” button to conrm.
6. SET MINUTE:
Press the “ MEMO” or “PAGE ” button to select
current Minutes. Press the “ AVG” button to conrm.
7. Press the “ MEMO” or “PAGE ” button to turn the
Clock Function “ON” or “OF”. Press the “ AVG”button
to conrm.
Note: If you select Clock Function “ON”, you will continue at
the Alarm Setting section. Otherwise, setting will end.
If clock setting is turned on, the unit will power o after
1 minute of inactivity.
2.3 Alarm Setting
Note:
•
To use the Alarm Setting, the Clock Function must be set to
“ON”. See section 2.2 (Date & Time Setting) for instructions.
•
You can set up to 4 alarms.
8. DISABLE ALARM:
To Disable the 1st alarm, press the “ MEMO” or “PAGE ”
button to select “OF”. Press the “ AVG” button to conrm
then Proceed to Step 12.
9. SET ALARM:
To Set the 1st alarm, press the “ MEMO” or “PAGE ”
button to select “ON”. Press the “ AVG” button to conrm.
10.Press the “ MEMO” or “PAGE ” button to select desired
Hour. Press the “ AVG” button to conrm.
11.Press the “ MEMO” or “PAGE ” button to select desired
Minute. Press the “ AVG” button to conrm.
12.Follow the same steps for the 2nd, 3rd and 4th alarm.
2 3 4
78 9
Note:
•
Press the “ ” button anytime during clock setting/alarm
setting to start over if an error occurs.
•
Each alarm clock lasts 45 seconds, or you can turn it o by
pressing the “ ” button.
2.4 Language/Sound Setting
When a measurement is completed, the results will read aloud;
the systolic value, diastolic value and pulse. The default
language is English.
To Change the Language Format:
1. Press and hold the“ MEMO” button until the screen
displays [LLLx] (x=0~3), then release the button.
2. Press the “ MEMO”button to select language.
Numbers 0~3 represent the following languages:
0Mute 2French
1English 3Spanish
3. Press the“ ” button to conrm the selection and
begin measurement.

3 4 5
89 10
Features
•
One Touch Operation
•
Irregular Heartbeat Detector
•
Blood Pressure Mode and Clock Mode
•
4 User / 396 Total Memory
•
4 Alarm Clock Settings
•
5 Mode Averaging Function—
Hour, Day, Week, Month and Overall
•
Auto-o Power Saving Feature
•
Operated by 2 AAA batteries
Note:
•
Avoid smoking, eating, drinking caeinated drinks or
exercising for 30 minutes before taking measurement.
•
Do not move or talk during measurement.
3.1 Sitting Correctly
1. Relax
2. Sit upright in a chair at a table with both feet on the oor.
3. If necessary, roll up your sleeve to bare your wrist. Take
caution not to restrict blood ow.
4. Place your arm on a table so that the cu will be at the
same level as your heart.
3.2 Applying the Wrist Cu
1. Place your elbow on a table with palm
facing upward, and wrap the arm cu
around the left wrist.
2. Pull on the end of the cu until it wraps securely around
your upper wrist. Do not over tighten the cu. Allow
1–2 cm or 1/2 inch between the bottom of the cu and
your wrist joint.
3. Make sure the cu is at the same level as your heart.
TAKING MEASUREMENT

4 5
910
3.3 User Setting
This unit allows up to 4 users to store measurement records
in dierent User Pages. Each User Page can store up to
99 measurements.
Press “PAGE ” button to switch between User Page 1, 2, 3
and 4.
3.4 Taking Measurement
1. Press the“ ” button. The cu will automatically inate
and the measurement will start.
2. When the measurement is complete, the cu will
automatically deate and your systolic and diastolic
pressure values and pulse rate will display.
3. Remove the arm cu and take note of your
measurement results.
Note: You can press the “ ” button to stop measurement at
any time.
3.5 Heartbeat Readings
Besides Systolic and Diastolic
values, Pulse will also be
displayed after a measurement.

1211
Irregular Heartbeat
This unit has a unique feature that alerts the user of irregular
heartbeat detection during measurement.
Note: An irregular heartbeat is dened as a heartbeat rhythm
that has a variation of more than 25% from the average
rhythm detected during measurement.
If such irregular rhythm occurs twice of more during the same
measurement, the display screen will ash between the pulse
value and “IH”symbol. Example: (90 / IH)
Note: Please consult your doctor if irregular heartbeat
occurs often.

1211 13
Regular but Below Normal Heartbeat
If the monitor detects a pulse rate below 60 beats per minute
during measurement, the monitor will ash between the pulse
value and “LO”symbol. Example: (58 / LO)
Regular but Above Normal Heartbeat
If the monitor detects a pulse rate above 100 beats per minute
during measurement, the monitor will ash between the pulse
value and “HI”symbol. Example: (102 / HI)

12 13 14
MEMORY FUNCTIONS
After measurement, the last set of measured values will be
saved automatically when the unit is turned o by pressing “ ”
button or by automatic power o after 3 minutes.
4.1 View Past Readings
1. Press the “ MEMO”button to enter memory function.
2. If the User Page is not what you want to view, press the
“PAGE ” button to select.
3. Press the “ MEMO”button to display the next sets of
values. Past readings are displayed from the most recent
to the oldest.
4. This device can store up to 99 sets of past readings for
each user (4 x 99).
4.2 View Average Readings
1. Press the “AVG”button to enter Average function.
2. If the User Page is not what you want to view, press the
“PAGE ” button to select.
3. Press the “AVG”button to view dierent Average
Values. 5 dierent Average Values are available: Hour, Day,
Week, Month and Overall.

13 14 15
4.3 Delete Past Readings
1. Press the “PAGE ” button to select the User Page you
want to delete.
2. Press and hold the“ MEMO” and “PAGE ” button
simultaneously for 5 seconds. Symbol of “EE EE” will
be displayed and all past readings stored in that
User Page will be deleted.
To Delete an Individual Measurement from the Memory
1. First press the “PAGE ” button to select the user.
2. Press the “ MEMO”button to select the stored
measurement to be deleted from the memory.
Press and hold the “AVG”button for 5 seconds
or until “dEL” appears in the display. Press the
“ MEMO” button to delete.
Symbol on Display Average Values of
1 h One Hour
1 d One Day
7 d One Week
30 d One Month
ALL All Readings

14 15
TROUBLESHOOTING
Check if the cu is
properly connected.
Replace the air tube
if it is broken.
Fail to inate“Err P” displayed
“Err 1” displayed
“Err 2” displayed
“Err 3” displayed Incorrect results Measure again.
Remove interfering
source e.g. mobile
phones, magnets.
Do not move during
measurement.
Return for servicing.Deate too rapidly
Movement during
measurement
Signal interference
Problem Cause Solution
No display when
you press the
Power/Start
button
Have the batteries
run out?
Are the battery
polarities wrong?
Replace new
batteries.
Re-align batteries
in correct polarities.
Note: If your problem cannot be solved by the solutions
above, contact Customer Service at [phone]
(Mon–Fri, 9am–5pm, EST). Do not disassemble
the unit.

1211
17
16
STORAGE & MAINTENANCE
•Keep the unit away from direct sunlight, extreme
temperatures, humidity or moisture
•Use a dry, soft cloth to clean the unit, or if desired, use a
cloth lightly dampened with water.
•Do not use alcohol, benzene, thinner or other volatile
liquids to clean the unit.
•Do not wash or expose the arm cu to liquid.
•Remove batteries from the unit when it will not be used
for more than 3 months.

1211 13
1716 18
SPECIFICATIONS
Note: Subject to modication without prior notice.
Model No.
Measurement Method
Measurement Range
Accuracy
Ination
Pressure Detection
Power Supply
Auto Power O
Storage Environment
Operation Environment
External Dimensions
Net Weight
Cu Dimensions
Package Content
Premium (SL-BW102V)
Oscillometric
Pressure: 20 – 280 mmHg
Pulse Rate: 40 – 195 beats/min
Pressure: +/- 3 mmHg
Pulse Rate: +/- 5%
Pump driven
Semi-conductor
2 x AAA batteries
3 minutes after last operation
-4°F to 140°F, 10% to 95% RH
50°F to 104°F, 30% to 85% RH
3.15” (L) x 3.35”(W) x 2.36” (H) or
80 x 85 x 60 mm
3.88oz/110g (batteries excluded)
5.31-8.66 in/135-220 mm
Instruction Manual, Battery Set,
Main Unit

12 13 14
17 18
WARRANTY
A Full 5-Year Warranty on Your Monitor
The SureLife® Talking Wrist Blood Pressure Monitor is warranted
to be free from defects in materials and workmanship within 5
years from the date of purchase. The monitor must be used in
accordance with the instructions provided.
Keep Your Proof of Purchase (Store Invoice)
The above warranty is extended to only the original retail
purchaser. Proof of Purchase required.
We will, at our discretion, repair or replace without charge the
wrist monitor covered by the above warranty.
To obtain warranty service, please contact MHC Medical
Products at [phone].
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF
THE APPLICABLE WRITTEN WARRANTY ABOVE.
FOR CUSTOMER
SERVICE CALL OUR
TOLL FREE NUMBER:
[phone]
AD-091621.5

13 14 15
18
Manufactured in accordance with
FDA and International Standards
MHC Medical Products
8695 Seward Road
Faireld, Ohio 45011
www.MHCmed.com
Made in China. Distributed by MHC Medical Products, LLC.
Package design © 2010
SureLife® is a trademark of MHC Medical Products.
FOR CUSTOMER
SERVICE CALL OUR
TOLL FREE NUMBER:
[phone]
AD-091621.5