Mhouse MhouseKit WK2 User manual

Mhouse
Via Pezza Alta 13
31046 Oderzo TV Italia
Tel. [phone]
Fax [phone]
[email protected]
www.mhouse.com
MhouseKit WK2
For wood or PVC swing gates with large pillars
Kit for automation
of a residential two-leaf gate,
each leaf measuring
up to 1.8m in width
and weighing up to 200kg
Especially suitable for gates
made of wood or PVC
Easy installation with the Mhouse
ECSBus system: only two wires are
required for polarity free connection
of the main system components.
The colour-coded terminals, each of which
identifies a set, enable quick, error-proof
connections. The aerial is integrated in the
flashing light for greater protection.
No welding is required for system installation
Compact and fast: WK2 is ideal for gates
with very deep pillars, which can be easily
operated thanks to its articulated arm.
Its smooth and precise movements make
it suitable for the most delicate gates
No waiting in front of the gate:
only 10 seconds to open and close
(in perfect installation conditions, making the most
of the whole run and with a 90° opening)
“Plug ’n Play” connections
very simple and quick, with easy
identification of wires and terminals
Extra safe thanks to the low-voltage
connections (24V), the safety accessories
and the automatic obstacle detection feature
Auto-programming: WK2 automatically
calculates the most suitable operating
parameters for each gate
Autodiagnostic system identifies
and immediately signals any connection
errors or malfunctions
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters (up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO-8.2K
safety devices, if installed
Quick motor release
for manual gate operation
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory)

217
230
min. 430mm (90°)
max. 250mm
max. 200kg
DS1 13-key digital switch
with programmable code,
via radio
EL1 12V electric lock
interface PT50 Two posts of 485mm high complete with a pair of premounted photocells
PT100 Two posts of 945mm high complete
with two pairs of premounted photocells
PR1 24V buffer battery
for emergency power
supply
MHDEP5-GB/02/06-06 Concept : Blu, Oderzo, TV Photos : Studio Gabriotti - Blu Printed by : xxxx Design : Roberto Gherlenda
Connections
The gauges of the required power cables are
specified on the technical literature (the length
varies according to the installation layout)
Verifications and setup
Make sure that adequate clearance is provided
for arm movement
Operating limits
Max weight of leaf (kg) 200
Max length of leaf (m) 1.8
Max opening angle 120°
Max no. of manoeuvres/day 50*
Operating temperature (°C) -20 ÷ +50
* opening + closing
2 WK1 Electromechanical gear motors.
Three Mhouse release keys
and mounting plate included
2 WKA Curved anti-shear arms
2 TX4 433.92MHz 4 buttons
variable code transmitters 1 PH1 Pair of wall-mounted autosynchronized photocells
1 Secure the motor
to the ground or post
using the mounting
plate
2Attach the arm
to the gate using the
appropriate bracket;
observe the
dimensions shown
in the instructions
3 Install and connect
all the system
elements
4 Connect the wires
with the terminals
to the control unit
and start the
automatic
programming
function
5 The system is
ready to receive
your commands!
1 KS1 Two-position (open/stop)
key-operated selector switch
with pair of metal keys
1 FL1 Adjustable flashing light
with incorporated aerial 1 CL2 External control unit for control of two WK1 gear motors
with integrated 433.92MHz
variable code receiver
Accessories:
Installation
Each Kit WK2 contains: