Mi 3 Ultra Compact User manual

Thank you for choosing 10000mAh Mi Power Bank 3 Ultra Compact. This product
is small and portable, supporting a maximum of 22.5 W in two-way fast charging.
Equipped with high-quality lithium polymer battery cells and a charging and
discharging chip, the power bank performs excellently in terms of safety,
efficiency, and compatibility.
Read this manual carefully before use, and retain it for future reference.
10000mAh Mi Power Bank 3 Ultra Compact
User Manual
Notes:
The battery level check button is not a power button.
The power bank detects charging and discharging automatically.
Safety: This power bank is equipped with multiple safeguarding technologies to
prevent overcharging, over-discharging, overheating, and short circuits in any
working condition.
Fast Charging: USB-A single port supports 5 V/2.4 A, 9 V/2.5 A Max., 12 V/1.85 A
Max. fast charging mode. USB-C single port supports 5 V/3 A, 9 V/2.5 A Max.,
12 V/1.85 A Max. fast charging mode.
Compatibility: The built-in USB charge controller is compatible with most smart
devices including smartphones, and tablets.
Quality: High-quality lithium polymer battery cells and a durable charging and
discharging chip.
Battery Level Check Button
Battery Level Indicator
USB-A Port (Output)
USB-A Port (Output)
USB-C Port (Input/Output) Micro-USB Port (Input)

LED4
Off
Off
Off
Off
Blinking
LED3
Off
Off
Off
Blinking
Blinking
LED2
Off
Off
Blinking
Blinking
Blinking
LED1
Off
Blinking
Blinking
Blinking
Blinking
Battery Level
Undervoltage
0-25%
25-50%
50-75%
75-100%
Discharging
To charge devices via the power bank, connect the charging cable to the device
and the power bank's USB-A or USB-C port. The indicator shows the following
discharging status:
* Low-current discharge: When the power bank is not charging, double press the
battery level check button to enter the low-current discharge mode. This mode
can be used to charge low-current devices such as Bluetooth headphones and
smart bands. The indicator lights will turn on one by one to indicate the power
bank is in low-current discharge mode. Simply press the button again to exit this
mode. The power bank will automatically exit this mode after two hours.
To charge the power bank, connect a Mi power charger and charging cable to its
USB-C or Micro-USB port. The indicator shows the following charging status:
Charging
LED4
Off
Off
Off
Blinking
On
Blinking
LED3
Off
Off
Blinking
On
On
Blinking
LED2
Off
Blinking
On
On
On
Blinking
LED1
Blinking
On
On
On
On
Blinking
Battery Level
0-25%
25-50%
50-75%
75-99%
Fully Charged
Charging Error
LED1
LED2
LED3
LED4

This power bank is not a toy. Please keep it away from children. Do not let children
use or play with this power bank in order to avoid accidents.
When charging this power bank, make sure you use a charger that complies with
the local safety standards to prevent electric shocks or cause damage to the
battery.
Do not expose this power bank to pressure, impact, strong vibrations, or liquids.
Any of these occurrences may lead to a short circuit or cause damage to the
battery or electrical circuit. If this happens, stop using the power bank immediately,
and dispose of it properly.
When the power bank becomes swollen, deformed, starts to leak, or its capacity
is significantly reduced, please stop using it immediately and dispose of it in a
proper manner.
Do not charge or discharge this power bank in places where its heat dissipation
may be affected, such as in the pocket of your pants, a closed bag, or on a bed or
sofa. Ensure the power bank is not covered by clothing, pillows, bedding, or other
miscellaneous items during its working. When using the power bank to charge
devices including phones for an extended time, do not stack them together to
ensure better heat dissipation.
Do not disassemble, puncture, strike, or short circuit this power bank. Never
expose it to liquids, fire, and other heat sources such as stoves, heaters, or
environments with ambient temperatures higher than 60°C (140°F).
When it is hot, do not leave this power bank in a car or places that are exposed to
direct sunlight.
This power bank contains a lithium polymer battery. Opening the casing is strictly
prohibited so as to avoid battery damage or safety hazards.
Warnings
Improper use may result in battery failure, overheating, and even fire or explosion. To
ensure your safety and minimize the risk of personal injury and property damage,
please observe the following precautions:

Illustrations of the product, accessories, and user interface in the user manual are
for reference purposes only. The actual product and functions may vary due to
product enhancements.
Precautions
Please fully charge this power bank before using it for the first time.
Use a qualified charger and a USB cable (Mi brand products are recommended)
when charging the power bank or using it to charge other devices.
When charging this power bank, do not leave it unattended for a long time. Unplug it
from the power supply before going out.
Once this power bank is fully charged or fully charges the smart devices, unplug
the charging cable in a timely manner to prevent damage.
If the battery level indicator does not light up after pressing the button, it may be
because the power bank is in protective mode. Try plugging in an external charger
will restore the power bank.
When not using this power bank for a long time, store it in a cool and dry
environment and keep its battery level in the range of about 25–50%. For long-term
storage, do not fully charge the power bank or leave the battery level empty to
avoid reducing its battery life.
Specifications
Model: PB1022ZM Battery Type: Lithium Polymer Battery
Cell Capacity: 10000 mAh, 3.7 V, 37 Wh
Input Port: USB-C/Micro-USB Output Port: USB-A/USB-C
Input: (USB-C) 5 V=3 A, 9 V=2.5 A
(Micro-USB) 5 V=2 A, 9 V=2 A
Output: 22.5 W Max. (Triple-port) 5 V=3 A
(USB-A) 5 V=2.4 A, 9 V=2.5 A Max., 12 V=1.85 A Max.
(USB-C) 5 V=3 A, 9 V=2.5 A Max., 12 V=1.85 A Max.
Operating Temperature: 5°C to 35°C
Item Dimensions: 90 × 63.9 × 24.4 mm
Charging Time: Approx. 3.5 hours (PD 24 W charger* or above, with a USB-C to
USB-C charging cable)
Approx. 6 hours (5 V/2 A charger*, with the charging cable included)
*Charger is not provided with power bank.

The manufacturer hereby, declares that this equipment is in
compliance with the applicable Directives and European Norms, and
amendments. The full text of the EU declaration of conformity is
available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
CE
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed
with unsorted household waste. Instead, you should protect human
health and the environment by handing over your waste equipment to
a designated collection point for the recycling of waste electrical and
electronic equipment, appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. Please contact the
installer or local authorities for more information about the location as
well as terms and conditions of such collection points.
WEEE Information

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Zimi Corporation
(a Mi Ecosystem company)
Address: A913, No. 159 Chengjiang Road, Jiangyin, Jiangsu, China
Anti-counterfeit Label Instructions
Each 10000mAh Mi Power Bank 3 Ultra Compact comes with an anti-counterfeit
label on the outer package. To check the authenticity of the product, scratch the
anti-counterfeit coating, and then enter the security code on chaxun.mi.com.
Anti-counterfeit Label
Scratched-off Coating
For further information, please go to www.mi.com
Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz