Mi DC UPS mini 24V User manual

Innovative Electronics for a changing world
Manual
DC UPS mini 24V
1. General description
2. Connections
3. Dimensions and weight
DC UPS mini 24V (100W power output + 100W battery charger)
The Mi DC UPS mini 24v was designed to give uninterupted 24V DC power to equipment.
The unit have a 24V @ 4Amp power supply feeding the load output and a separate 24V @ 4 amp
attery charger internal to charge the attery.
While the load is powered y the 24V @ 4 Amps power supply the attery is charged in isolation
from the load output via a separate 24V @ 4 Amps attery charger.
As soon as the mains 220VAC input power fails the unit switch over to attery power without
interrupting the DC output to equipment , the yellow led will glow to indicate the system is running
on attery power.
As soon as the attery falls to a voltage level of 22.0 VDC the system will shut down completely
and disconnect the output power , the red attery low led will glow.
DC UPS mini 24V
Mi

The system will reset as soon as the 220Vac mains voltage is resored, the load will e powered
via the internal 24V power supply again and the attery will start charging in isolation via the
internal attery charger until full.
Charge method is constant current / constant voltage. End charge voltage of 28.4Vdc
Output power protected via a 5 Amp Blade fuse
Power input via C13 female power cord (Supplied with UPS)
Physical dimensions and weight:
W = 150mm
L = 200mm
H = 50mm
Weight = 1.0 KG
DC UPS mini 24
V
Mi