Micro X21 User manual
MICRO X
User Manual
Français
Traductionde lanotice
originale
301
English
Translation of the original
instructions
Please contact your local Micro distributor for manuals in other languages.
Micro_X21_Book.indb 1Micro_X21_Book.indb 1 21.06.21 16:0821.06.21 16:08
.
.
.
.
.
.
Before using for the rst time ..............................................................................................15
Before each trip ...................................................................................................................... 16
Translation of the original instructions................................................................................ 5
Explanation of terms and symbols ....................................................................................... 6
Unit identication .................................................................................................................. 12
Wear and tear ......................................................................................................................... 12
What to do aer a fall or accident ....................................................................................... 12
Battery instructions for use ................................................................................................. 13
Protection against the ....................................................................................................... 13
Transporting the electric scooter ........................................................................................13
Storage ..................................................................................................................................... 13
Cleaning ................................................................................................................................... 14
Repair ....................................................................................................................................... 14
Instructions for disposal ....................................................................................................... 14
4
7
8 – 10
Components
Initial setup
Intended Use
General information
Instructions for use
Safety Instructions
CONTENTS
. Side Stand................................................................................................................................ 16
Pre-assembly instructions .................................................................................................... 17
Folding ..................................................................................................................................... 18
Charging the battery ............................................................................................................. 19
Instructions of Buttons ......................................................................................................... 20
Driving with the electric scooter ......................................................................................... 21
Brakes ...................................................................................................................................... 21
Operation
EN
Micro_X21_Book.indb 2Micro_X21_Book.indb 2 21.06.21 16:0821.06.21 16:08
.
.
Scope of warranty services .................................................................................................. 27
Warranty
Declaration of conformity
.
.
.
.
.
Recharge Policy .................................................................................................................... 24
Battery maintenance .......................................................................................................... 24
Maintenance
Technical data
Warranty conditions
Micro-Pass
Service record
25
28
30
31
26
Operating the motor brake .................................................................................................. 22
Operating the hand brake..................................................................................................... 22
Riding programs ..................................................................................................................... 23
Micro_X21_Book.indb 3Micro_X21_Book.indb 3 21.06.21 16:0821.06.21 16:08
COMPONENTS
Thumb throttle
(accelerator)
Thumb throttle (motor brake)
Footboard
Motor
Clamping lever
Disk Brake
Folding
mechanism
Hand brake (integrated bell) Display
Light
4
EN
Front reector
Side reectors
Micro_X21_Book.indb 4Micro_X21_Book.indb 4 21.06.21 16:0821.06.21 16:08
Translation of the original instructions
IMPORTANT! Before you begin using the electric scooter, please take the time to read
the user manual carefully, especially the safety instructions. Please observe the road
regulations for driving electric scooters which are also applicable in other countries
and which may dier. Please keep this user manual for future reference. If you pass the
electric scooter to a third party, please be sure to pass on this user manual.
All pictures for reference only and are subject to change.
GENERAL INFORMATION
5
symbole CEI 60417-6181 (2013-03)]
Charger Ref: 5945
symbole ISO 7000-0790 (2004-01)]
Micro_X21_Book.indb 5Micro_X21_Book.indb 5 21.06.21 16:0821.06.21 16:08
Explanation of terms and symbols
CAUTION
NOTE
WARNING
The purpose of the security symbols is to draw your attention to possible dangers. Read
the explanations carefully and make sure you understand the security symbols. Failure
to follow the safety instructions can lead to personal injury or injury to third parties as
well as damage to property.
The following symbols and signal words are used in this original user manual, on the
electric scooter, or on the packaging:
Indicates a potential low-risk hazard, which may result in minor or
moderate personal injury if not observed. This signal word is not used for
risks that involve purely material damage.
Indicates practical information and tips, which facilitate optimal use
of the electric scooter.
Indicates a potential medium-risk hazard, which may result in serious or
fatal physical injury if not observed. This signal word is not used for risks
that involve purely material damage.
6
EN
Micro_X21_Book.indb 6Micro_X21_Book.indb 6 21.06.21 16:0821.06.21 16:08
The electric scooter is intended exclusively for use as a scooter on dened roads
and paths.
The electric scooter is intended for the transport of one person.
The electric scooter is designed for persons with a maximum weight of 100 kg, and
a maximum height of 190 cm.
Please ensure you have read and understood the road trac regulations of your
country before you use the electric scooter.
The electric scooter is not suitable for transporting luggage or children.
The electric scooter is for private use only and not for commercial purposes.
The intended use also includes compliance with the information in the chapters
‘Notes on use’ and ‘Maintenance’.
Use the electric scooter only as described in the original user manual. Any other
type of use is considered to be non-compliant and may lead to accidents, personal
injury or damage to property.
INTENDED USE
7
Micro_X21_Book.indb 7Micro_X21_Book.indb 7 21.06.21 16:0821.06.21 16:08
8
SAFETY INSTRUCTIONS
Only use the electic scooter on suitable surfaces (at, clean, dry and where
possible away from other road users). Keep several metres distance from other
road users.
Do not use the electric scooter if you are not entirely familiar with its operation and
functions. First practice driving your electric scooter in a wide open and safe space.
Get closer to your seller so he can refer you to an appropriate training organization.
The scooter must not be used by persons with limited physical, sensory or mental
capacity, or lack of experience and expertise.
Assure that young riders have been given supervision or instruction concerning the
use of the product by a person responsible for their safety.
The additional electronic brake assistance (motor brake) may lead to a shorter
braking distance. Please be aware that the motor brake is not supported if …
• the battery is discharged and you are riding with body power alone.
• the battery is 100% charged and hence energy cannot be regenerated.
Avoid riding at dusk (night) or in poorly lit conditions.
For optimum visibility and safety, equip your electric scooter with lighting and
always ride with the lights switched on.
Always wear an approved helmet when driving your electric scooter. Keep the
chinstrap securely buckled. Always wear a helmet, wrist-pads, elbow-pads, knee-
pads, hand protection and shoes with rubber soles when driving the electric scooter.
Don’t use headphones or a cell phone when riding.
Never have another vehicle pulling you.
Do not drink alcohol and ride.
Do not ride indoors or on surfaces that could become damaged such as carpet or
ooring.
Keep your ngers and other body parts away from the wheels and all other moving
components.
Avoid steep descents as they may lead to falls.
Always pay attention to other road users. The misconduct of others may result in
accidents and injuries.
Always ride gently and pay particular attention to the condition of the road.
Unpredictable road conditions, such as slipperiness or foliage, may lead to an
increased risk of skidding.
Trac in the city has many obstacles to cross such as curbs or steps. It is
recommended to avoid obstacle jumps. It is important to anticipate and adapt
EN
Micro_X21_Book.indb 8Micro_X21_Book.indb 8 21.06.21 16:0821.06.21 16:08
9
your trajectory and speed to those of a pedestrian before crossing these obstacles.
It is also recommended to get out of the vehicle when these obstacles become
dangerous due to their shape, height or slippage.
Do not touch the brake aer prolonged braking; it may be hot.
If the electric scooter is exposed to wetness due to wet weather or cleaning, the
moisture may eect the responsiveness of the braking system. Ride the scooter in
a safe place to dry the brakes aer cleaning.
Never store the electric scooter in living areas or near ammable objects.
Stop using the product when damaged
Any load attached to the handlebar will aect the stability of the vehicle
Keep plastic covering away from children to avoid suocation.
Avoid high trac areas or overcrowded areas.
In any case, anticipate your trajectory and your speed while respecting the code of
the road, the code of the sidewalk and the most vulnerable.
Notify your presence when approaching a pedestrian or cyclist when you are not
seen or heard.
This vehicle is not intended for acrobatic use.
Always hold the handlebars with both hands and feet on the board in a stable and
comfortable position.
Beware of possible entrapment of ngers and other body parts when folding and
unfolding the scooter.
The power to the scooter must be switched o before any maintenance or
adjustment is carried out.
All maintenance and repairs must be carried out using the original parts supplied
by Micro Mobility.
Only Micro chargers are suitable for charging Micro electric scooters.
The motor power is 350W. The maximum total power accepted from the battery
during an acceleration is 500W.
This appliance may be used by children of at least 12 years of age, if they are
properly supervised or if they have been instructed in the safe use of the appliance
and the risks involved have been understood. Children must not play with the
appliance. The minimum age of 12 years is a requirement of decree 2019-1082.
Your insurance policies may not provide
coverage for accidents involving the use of
this product. Contact your insurance company
to determine if coverage is provided and for
more information regarding recreational use
and the usage on public roads.
NOTE
Micro_X21_Book.indb 9Micro_X21_Book.indb 9 21.06.21 16:0821.06.21 16:08
10
Make sure only to charge the battery with the enclosed charger and only at
temperatures between 5° and 25° Celsius.
Follow the safety instructions on the battery.
Never charge the battery unattended.
When charging the battery, ensure proper plug connection, adequate ventilation
and a dry environment.
Never bring the charger, the batterie and connectors into contact with water as this
may cause an electric shock. Do not touch the battery or charger with wet hands.
Check the connecting plug and charger at regular intervals. If there is any damage,
have them replaced.
Always store the battery at temperatures between 5° and 25° Celsius.
Keep the battery out of reach of children and animals at all times.
Any repairs and maintenance of the battery or charger must be carried out by a
specialist.
The installed batteries are rechargeable lithium-ion batteries. Never charge
batteries that are not intended to be recharged.
Don’t plug the charger continuously in the power socket when the charger is not in
use.
Do not deform, modify, disassemble or apply solder directly to the battery.
Do not charge or leave the battery near active heating devices.
Do not dispose of a battery in re or water.
Avoid connecting of + and - terminals with metallic objects; store the battery
separately to avoid contact with metallic materials.
The charger is not a toy and shall only be operated by adults.
for using the battery
WARNING
EN
for attachments and modications
WARNING
Please note that riding with electric assist takes getting used to. When riding,
make sure that your body is facing forward, rather than backward, otherwise
accelerating may li the front wheel o the ground.
Never ride with motor support on the sidewalk.
Micro_X21_Book.indb 10Micro_X21_Book.indb 10 21.06.21 16:0821.06.21 16:08
for setup, maintenance and repair
WARNING
Do not modify the electric scooter or install incorrect accessories as this will put
your safety at risk.
The use of unauthorized accessories may result in serious injury or damage to the
electric scooter.
‘Customization’ or ’Tuning’ of the electric scooter is forbidden.
Do not hang items such as bags on the handlebar, as this will have an adverse eect
on the handling characteristics.
Incorrect tightening of screws may lead to material fatigue. Screws become so
when they are subjected to excessive stress and may tear. This increases the risk of
accidents and injuries. Always use a torque spanner to tighten the screws.
Self-locking xings can lose their eectiveness aer several months.Regularly
check the tightening of the various bolted elements, in particular the wheel axles,
the folding system, the steering system and the brake sha.
Always consult a specialist for repairs to the drive system.
Make sure that the bearings are properly maintained at all times.
The wheels may wear over time and should be replaced if necessary.
Eliminate any sharp edges caused by use.
11
It is recommended to fully charge the battery before using the scooter for the rst
time.
Charge the battery at least once every 3 months even if the product is not in use.
Failure to do so may results in batteries that cannot longer accept any charge.
Noise emission: The A-weighted emission level is less than 70 dB(A).
Please contact the ocial Micro distributor in your market for further information
regarding the followings: 1. Lubrication recommendations: locations and frequency
of lubrication, recommended lubricant. 2. The method for adjusting the brakes and
recommendations concerning the replacement of friction components. 3. Method
for adjusting or setting all of the components that would need to be adjusted
regularly or aer replacement of a part. . Where to nd a qualied maintenance
shop for items that cannot be done by oneself (e.g. replacement of wear parts,
electronic components, tightening torques etc.)
The disk brake has to be checked and eventually tuned regularly to assure an
eective braing performance.
Only Micro Chargers are suitable for Micro e-scooters.
For a better waterproofness be sure to have the charging slot protection cover
always closed.
Micro_X21_Book.indb 11Micro_X21_Book.indb 11 21.06.21 16:0821.06.21 16:08
INSTRUCTIONS FOR USE
Unit identication
The serial number is on the right side of the deck.
More information about your scooter can be found on the adhesive label axed to
the scooter.
Serial number
Wear and tear
Use of the electric scooter results in a natural wear and tear process. To ensure safe
riding at all times, please read the chapter ‘Maintenance’, observe the maintenance
intervals and have them recorded in the service record by an authorized service centre.
Furthermore, follow the instructions in the 'Before each trip' section, each time you
start up your electric scooter.
What to do aer a fall or accident
Aer a fall or accident, bring your electric scooter to an authorised service centre and
have it checked for any damage.
xxxxxxxxxxxx
EN 12
Micro_X21_Book.indb 12Micro_X21_Book.indb 12 21.06.21 16:0821.06.21 16:08
Battery instructions for use
Protection against the
Transporting the electric scooter
The built-in lithium-ion battery is a high-tech product which provides excellent
performance with correct handling and maintenance. Please read and follow the
section ‘Charging the battery’ in the chapter ‘Operation’ and the instructions for
‘Battery maintenance’ in the chapter ‘Maintenance’.
Ensure that you never leave your electric scooter unattended, and always protect it
from the with a suitable lock. Use a commercially available bicycle lock to secure the
electric scooter in the area of the front wheel.
The batteries are subject to legislation for hazardous goods. Special packaging and
labelling requirements apply to transport by third parties (e.g. air freight or parcel
service). In the case of shipment, please contact an expert for hazardous goods. Do not
transport or ship damaged batteries.
Storage
Do not leave your scooter in direct sunlight or cold weather for extended periods of
time. The ideal storage temperature for your scooter and battery is between 15° to 20°
Celsius. Do not store your electric scooter in living areas, but rather in the garage.
13
Micro_X21_Book.indb 13Micro_X21_Book.indb 13 21.06.21 16:0821.06.21 16:08
Repair
Cleaning
Have all repairs performed by an authorized dealer or an authorized service centre. Do
not carry out any repairs on electrical components yourself. Only a specialist may open
enclosures with built-in electrical components.
To prevent corrosion of the screws and unnecessary wear and tear, it is advisable to
thoroughly clean and dry the unit every three months and aer every ride in the rain.
Aer cleaning, rinse the scooter with clean water to remove any traces of the cleaning
agent used. Then dry the scooter with a cloth.
Use device-specic cleaning agents and care
products as well as a so sponge. Never use
solvents for cleaning and avoid cleaning the
scooter directly under running water.
Do not perform any cleaning or maintenance
when the power is on or the battery is
charging and do not spray liquid directly onto
any part of the vehicle.
NOTE
WARNING
Instructions for disposal
Pay attention to the environment during disposal and observe the following
instructions:
Only dispose of the electric scooter and associated components (e.g. battery) at an
approved disposal company or via the community disposal facility.
Observe the current regulations. If in doubt, consult your disposal
facility for environmentally sound disposal. Batteries and electrical
appliances must not be disposed of with domestic waste!
14
EN
Micro_X21_Book.indb 14Micro_X21_Book.indb 14 21.06.21 16:0821.06.21 16:08
INITIAL SETUP
Before using for the rst time
Check that the goods are all present.
The end of this user manual contains the Micro-pass. Fill out the Micro-pass
completely and store it together with the purchase receipt. The Micro-pass enables
a smooth processing of repairs and warranty issues.
he battery is only partially charged upon delivery. Before using for the rst time,
fully charge the battery using the charger provided.
15
Item N0:
Product Electric
Scooter
Allen
wrench Charger User
Manual 4 Handle bar
screws
EM0067 Micro
X21
Micro_X21_Book.indb 15Micro_X21_Book.indb 15 21.06.21 16:0821.06.21 16:08
Before each trip
The electric scooter must be checked for its roadworthiness before each trip. The
vehicle is delivered by the manufacturer fully ready for use. Because defects potentially
impairing the function of the vehicle may occur during transport as well as during any
periods o the road, please always pay attention to the following points before using for
the rst time and before each trip:
Test item Test content
Lights Are the lights turned on?
General condition Are all screws tightened rmly and all components secured?
Brakes Are the brakes set correctly and fully functional?
Folding mechanism Has the folding mechanism clicked into place properly and is
the clamping lever closed and tightened rmly?
Battery charge status Is the battery suciently charged?
Current riding mode Which driving mode is currently set?
Battery compartment Is the battery compartment properly closed?
Side stand
The electric scooter has a side stand. This is located on the le side under the
footboard.
Image:
Side stand folded out Image:
Side stand folded in
OPERATION
EN 16
Micro_X21_Book.indb 16Micro_X21_Book.indb 16 21.06.21 16:0821.06.21 16:08
17
During each trip, make sure that the side
stand is always folded correctly.
WARNING
Pre-assembly instructions
Your electric scooter is delivered folded up. Aer having assambled the handle bar on
it, in a few simple steps, it is unfolded and ready to ride. The following explains how to
unfold the scooter.
1. Release the handle bar from the hook located on the rear fender.
2. Pull up the front tube until it is in vertical position. Close the handle until you hear
the click.
3. Plug the connectors. Be careful to do not pinch wires.
4. Assemble the handlebar with a 3 mm Allen key. Tighten all three screws properly.
Scews and tool are included in the box.
Micro_X21_Book.indb 17Micro_X21_Book.indb 17 21.06.21 16:0821.06.21 16:08
Folding
1. To fold your scooter, pull up the trigger on the side with your thumb and at the
same time pull down the handle.
2. Accompany the front tube down until it reaches the rear fender. Hinge the hook
on the rear fender withe the hanger on the handle bar.
ENEN 18
Micro_X21_Book.indb 18Micro_X21_Book.indb 18 21.06.21 16:0821.06.21 16:08
19
Charging the battery
The following describes the charging process:
Connect the charger to an electrical outlet. The LED display on the charger should
now light green.
Ensure the scooter is turned o before charging and remains o while charging.
Now connect the electric scooter to the charger. You can see that the charger and
scooter are connected correctly when the LED display on the power supply unit
changes to red (this may take a few seconds).
When the scooter is fully charged, the LED display on the charger changes back to
green.
Each charge cycle from empty to full will take approximately 6 hours.
Your charger may get warm during use. This is normal and is no cause for concern.
Micro_X21_Book.indb 19Micro_X21_Book.indb 19 21.06.21 16:0821.06.21 16:08
ENEN 20
Notes :
1. Press and hold the power button for 2 seconds to turn the Scooter ON/OFF.
2. Automatic shutdown time of the whole Scooter: 10 minutes.
Instructions of Buttons
ON/OFF Press and hold the power button for 2 seconds to
turn the Scooter ON/OFF.
Speed This gure shows your current speed in km/h.
Lights Press the power button 1 times to switch on the
lights.
Riding Modes Press the power botton twice very quickly to change
the riding mode
Battery Five cells show the remaining battery capacity. One
cell stands for 20%.
Riding modes
Light
ON/OFF
Speed
Battery capacity
Micro_X21_Book.indb 20Micro_X21_Book.indb 20 21.06.21 16:0821.06.21 16:08
This manual suits for next models
1
Table of contents
Languages:
Other Micro Scooter manuals
