Microlab H11 User manual

Prior to firstuse, please readthe manual carefully
User Manual
H11
Microlab Technology Co, .Ltd
Made in China
All symbols and logo belong to the respective brand holder or registered holder. All specifications and information are subject to changes without
further notice. Slight variations and differences mightappear between the printed photos and actual productdue to product enhancement.
Ti-Dome Balanced Drive Multimedia Monitor
No:80-H11-97-0001-01
80-H11-97-0001-01 09-8-31

1
Important Safety Instructions Frequently Asked Questions (FAQ)
WARNINGS:
1. Read Instructions - All the safety and operatinginstructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be keptproduct for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and use instructionsshould be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the typeof power source indicated by the marking adjacent to
the power cord entry. If you arenot sure of the type of power supply to your home, consult your product dealer or local
power company.
7. Grounding or polarisation - the product is not required to be grounded. Ensure the plug is fully insertedinto the wall outlet
or extension cord receptacle to prevent blade or pin exposure. Some versionsof the product are equipped with a power
cord fitted with a polarized alternating line plug (a plug having oneblade wide than the other). This plug will fit onto the
power outlet only one way. Thisis a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electricianto replace your obsolete outlet. Do not defeat the safety
purpose of the polarised plug. When using an extension power-supply cord ora power-supply cord other than that
supplied with the appliance ,it should be fitted with the appropriate moulded-onplugs and carry safety approval
appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that theyare not likely to be walked on, kinked or
pinched by items placed on or against them, paying particular attention tocords from plugs, receptacles and the point
where they exit from the appliance.
9. Overloading - Do not overload wall outlets, extension cords or multiple sockets,as this can result in a risk of fire or
electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface.
Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products) including amplifiers that produce heat.No naked flame sources,such as lighted candles,should be placed on
the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not exposethe product to train, dripping, splashing or
excessive moisture such as in a sauna or bathroom. Do not usethis product near waterfor example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near aswimming pool and the like.
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch
dangerous voltage points or short-circuit parts that could result in a fireor electric shock. Never spill liquid of any kind on
the product. Do not place any object containing liquid on top of theproduct.
14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be cleaned by
dusting with a dry cloth. If you wish to use an aerosolcleaning spray, do not spray directly on the cabinet; spray onto the
cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufactures, as they may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing
serious injury to a child or adult, and serious damage to theproduct. Use only with a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product.Any mounting of the product should follow the manufacturer's
instructions and should use a mounting accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive force and
uneven surfaces may cause the product and cart combination to overturn.
18. Unuse periods - The power cord of the appliance should be unplugged from the outlet during lightning storms or when the
apparatus is left unused for a long period of time.
Caution:
To reduce the riskof electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No
user-serviceable parts inside. Refer servicing to qualified personnel only.
6
If the problem still exists, please contact the distributor or seek professional advice.
Check if theaudio source isworking well
Check if theaudio and speakercables well connected
Check if thevolume at rightlevel
Static sound heard when
volume knob is turned
What are the products
supported?
Where to place this speaker
Check if thesource file isnot corrupted, playa different
song and test.
Check if the satellite cable well connected, and ensure
source connection is correctly inserted
One or more satellite no sound
No Sound
Sound is distorted
Turn offthe playback sourcefirst, then turnthe speaker
volume knob severaltimes. Playback againand monitor.
The static noiseis due to dust, so simply turning the
volume will removeit easily.
It is magneticallyshielded so canbe placed nearLCD TV
Monitor without anydistortion
Any playback devices such as PC, notebook, CD/DVD
player, Media Players with 3.5mm stereo plug.
Solutions
The lightning flash within an equilateral triangle is intended to alert youto the presence of uninsulated¡°dangerous voltage¡±
within the product's enclosure that may be of sufficient magnitude to constitutean electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert youto the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
Explanation of Graphical Symbols:
80-H11-97-0001-01 09-8-31

5
Introduction
Technical Information
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use. When plugged in to a
power source, the system is in standby mode, so the power is notentirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the originalpart. Unauthorized substitutions may
result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse
specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker
may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the
wall outlet or the product. The wall outlet or the powercord entry to the product must remain freely accessible at all times
while the product is in use.
25. Try to install the product near a wall socket or exetension cord and shall be easily accessible.
o
26. The highest environmental temperature suitable for this product is 40 C.
Specifications
2
Features
Powerful 2.0 stereosystems with fullrange spectrum capabilities
High quality woodcabinets with bassreflex system fordepth and resolutions
Uncoloured audio andbalanced tones
Wired remote controlfor easy mastervolume control, with3.5mm stereo inputjack and
3.5mm earphones jack
Gorgeous black texturedfinish and frontpanels.
Package contents
H11 stereo speakers 2pcs
Wired remote control 1pc
3.5mm stereo - 2RCAcable pc
Interconnect speaker cable 1pc
User manual
1
1pc
Microlab's advance designconcept, quality stereosystem with superb audio characteristics.
Built for latestdigital audio playbacksfrom various sources such as Mp3/Mp4, CD/DVD
player or evenTV monitor outputs.
Capable of handlingmost digital outputsignals with ease and produce at high fidelity levels.
Classy monitor systemwith titanium dometweeters.
Amplifier
Output power: 40Watt RMS
Power distribution: 20Watt x 2
Harmonic distortion: <0.3% 1W 1kHz
Frequency response: 45Hz- 90kHz
Signal/Noise ratio: >80dB
Separation: > 60dB
Input sensitivity: 370mV
Nominal impedance: Satellites- 6 ohm,Woofer - 4 ohm
Speakers
Tweeter drivertype: 1"
Tweeter ratedpower: 10 Watt 6 ohm
Bass driver type: 4"
Bass rated power: 30 Watt 4 ohm
Interfaces:
Output: Terminal binding posts,3.5mm earphones
jack on wiredremote control
Input: 2RCA
Auxilliary input: 3.5mmstereo jack
Power
Power supply: AC 220V -240V ~ 50Hz, 270mA
Dimensions
Product dimension: 145x 254 x 230mm (W x H x D)
Product net weight: 6.9kg
Giftbox dimension: 364x 327 x275 mm (W x H x D)
Giftbox gross weight: 7.5kg
80-H11-97-0001-01 09-8-31

Product connection and operation
Illustrations
34
Wired remote control
1
2
3
4
1
2
3
4
5
6
8
7
1. Wired remote control
2. Audio input
3. Audio output
4.
5. AC power supply
6.
Power switch
Heat sink
7.
8.
Bass reflex tunnel
Terminals
*please note thefigure above for this product system correct placing and connection
PC
Mp3 \ Mp4
Media player
CD\ VCD \ DVD
Sub SpeakerMain Speaker
Panel:
AC power supply:
220V-240V~ 50Hz
Sub Speaker Main Speaker
1. Multimedia speakerconnections
a. Connect theinterconnect speaker cable to the Sub speaker and the other end to the Main speaker's
audio output jacks(terminals)
b. Ensure theterminal polarity connections are matched both ends.
c. Ensure themaster volume on the wired remote control is turned down low or minimum, connect the
2RCA leftand right connector to the Main speaker rear audio input jacks.
d. Connect thecorresponding end to your playback device.
e. Plug theAC powercable to source and turn on the power.
2. Alternative connections
a. For easyaccess, you canconnect your earphones or headphones to directly to the wired remote
control. Note: themain speakers will mute once this jack is used.
b. Secondly,you can connecta direct inputfrom any playbacksource to the3.5mm stereo input jack
on the wiredremote control.
Note: The connectionson the wiredremote control precedesthe input onthe rear panel of the
speaker. Theinput on thespeaker will muteif a sourceis added onthe wired remote control.
3. Operation
a. Depress thePOWER switch on the Main speaker to turn on the multimedia speaker system.
b. Ensure thatyour audio source is correctly configured and start the playback file.
c. Adjustthe master volume on the wired remote control to your preferred level.
1. Master volumeknob: Turn clockwise to increase playback volume and counterclockwise
to decrease volume.
2. Audiosource input jack: 3.5mm stereo input jack for connections to computer sound
Output and othermedia player devices.
3. Earphones outputjack: 3.5mm stereo earphones or headphones connection.
4. Power LED:red colour illumination when power is on.
80-H11-97-0001-01 09-8-31