Microsens MS659150M User manual

Dual Band 4x4 Wi-Fi 6 Indoor Access Point
MS659150M
Quick Start Guide LED Indicator Let’s get startedIn the Box
COLOR
Device is not receiving power
Device is being powered on
Firmware upgrading in process
Device is in serious error and cannot provide services normally
Device has no Internet access
Device serves as the Controller role or Standalone
Device serves as the Agent role
DESCRIPTION
OFF
Flashing Amber
Cyclic between Amber/Red
Solid Red
Solid Amber
Solid Green
Solid Blue
STATUS
or
Device
Screw x 4
(For securing the
ceiling mount bracket)
Ceiling mount kit bracket A
(metal)
Ceiling mount kit bracket B
(plastic)
Ceiling mount step 2 –
attach ceiling mount bracket
to Ceiling T-Bar
2
Ceiling mount step 1 –
combining ceiling mount bracket
A and B with screws enclosed
1
Fig.1-1
Fig.2-3
1506-XXXXXXX
Fig.2-1
Fig.2-2
148x148mm
LED Behavior

Remove device from bracket Wall Mount Installation Web UI sign-in
Customer can use Web UI to configure MS659150M.
In order to login Web UI, please
● Open a web browser and enter the URL https://ms659150m.local
in the address bar to access to the Access Point.
● Log in to the Web UI using the default username: admin and password
(Located on bottom of your Access Point).
34
2
1Step 1 – Lift the latch
Step 2 – Push the device out of bracket
Fig.1-1
Fig.2-1
Fig.4-1
Ceiling mount step 4 –
attach the device the ceiling
mount bracket
Fig.3-1
Fig.3-2
Ceiling mount step 3 –
connect the ethernet with POE to the
2.5GE port or connect the DC12V and
check LED indication for device boot up
100mm
5mm
D = 5mm
L >= 30mm( with > 25mm inside wall)
DK <= 10mm
L
D
DK