H3C WA2612-AGN User manual
H3C WA Series Access Points
Web-Based Configuration Guide
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Document version: 6W106-20130802
Copyright © 2003-2013, Hangzhou H3C Technologies Co., Ltd. and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior
written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,
SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of
Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Preface
The H3C WA Series Access Points Web-based Configuration Guide describes the web functions of the
WA series, such as quick start, Web overview, wireless service configuration, security and authentication
related configurations, QoS configuration, and advanced settings.
NOTE:
•The grayed out functions or parameters on the web interface indicate that they are not supported or
cannot be modified.
•The displayed web pages may vary depending on your AP model.
•The terms
AP
and
fat AP
in this document can refer to wireless bridges with fat AP functions.
This preface includes:
•Audience
•Conventions
•About the H3C WA series access points documentation set
•Obtaining documentation
•Technical support
•Documentation feedback
Audience
This documentation is intended for:
•Network planners
•Field technical support and servicing engineers
•Network administrators working with the WA series
Conventions
This section describes the conventions used in this documentation set.
GUI conventions
Convention Descri
p
tion
Boldface Window names, button names, field names, and menu items are in Boldface. For
example, the New User window appears; click OK.
> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.
Symbols
Convention Descri
p
tion
WARNING An alert that calls attention to important information that if not understood or followed can
result in personal injury.
CAUTION An alert that calls attention to important information that if not understood or followed can
result in data loss, data corruption, or damage to hardware or software.
IMPORTANT An alert that calls attention to essential information.
NOTE An alert that contains additional or supplementary information.
TIP An alert that provides helpful information.
Network topology icons
Represents a generic network device, such as a router, switch, or firewall.
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports
Layer 2 forwarding and other Layer 2 features.
Represents an access point.
Represents omnidirectional signals.
About the H3C WA series access points
documentation set
The H3C WA series access points documentation set includes:
Cate
g
or
y
Documents Pur
p
oses
Product
description and
specifications
Marketing brochures Describe product specifications and benefits.
Hardware
specifications
and installation
Compliance and safety
manual
Provides regulatory information and the safety instructions
that must be followed during installation.
Quick start
Guides you through initial installation and setup procedures
to help you quickly set up and use your AP with the
minimum configuration.
Installation guide Guides you through hardware specifications and
installation methods to help you install your AP.
Software
configuration Getting started guide
Guides you through the main functions of your AP, and
describes how to install and log in to your AP, perform
basic configurations, maintain software, and troubleshoot
Cate
g
or
y
Documents Pur
p
oses
your AP.
Configuration guides Describe software features and configuration procedures.
Command references Provide a quick reference to all available commands.
Operations and
maintenance Release notes
Provide information about the product release, including
the version history, hardware and software compatibility
matrix, version upgrade information, technical support
information, and software upgrading.
Obtaining documentation
You can access the most up-to-date H3C product documentation on the World Wide Web
at http://www.h3c.com.
Click the links on the top navigation bar to obtain different categories of product documentation:
[Technical Support & Documents > Technical Documents]—Provides hardware installation, software
upgrading, and software feature configuration and maintenance documentation.
[Products & Solutions]—Provides information about products and technologies, as well as solutions.
[Technical Support & Documents > Software Download]—Provides the documentation released with the
software version.
Technical support
servic[email protected]
http://www.h3c.com
Documentation feedback
You can e-mail your comments about product documentation to info@h3c.com.
We appreciate your comments.
i
Contents
About the WA series access points Web-based configuration guide ····································································· 1
Applicable models and software versions······················································································································1
Feature matrix····································································································································································1
Quick Start···································································································································································· 3
Quick Start wizard home page·······································································································································3
Basic configuration ···························································································································································3
Admin configuration ·························································································································································4
IP configuration ·································································································································································5
Wireless configuration······················································································································································6
RADIUS configuration·······················································································································································7
Encryption configuration ··················································································································································9
Radio configuration ······················································································································································· 11
Configuration summary ················································································································································· 12
Quick Start configuration examples····························································································································· 12
Simple text authentication configuration example····························································································· 12
WEP (Open-System) encryption configuration example ··················································································· 14
WPA2-PSK authentication configuration example····························································································· 17
Summary·····································································································································································20
Device information ························································································································································· 20
Device info ····························································································································································· 21
System resource state············································································································································ 21
Device interface information ································································································································ 21
Recent system logs················································································································································· 22
Displaying WLAN service············································································································································· 22
Displaying detailed information of WLAN service···························································································· 22
Displaying statistics of WLAN service················································································································· 25
Displaying connection history information of WLAN service··········································································· 25
Displaying radio····························································································································································· 26
Displaying WLAN services bound to a radio ···································································································· 26
Displaying detailed radio information ················································································································ 26
Displaying WDS····························································································································································· 29
Displaying client····························································································································································· 30
Displaying client detailed information ················································································································ 30
Displaying client statistics ····································································································································· 32
Displaying RF ping information ··························································································································· 34
Device basic information configuration····················································································································35
Configuring device basic information·························································································································· 35
Configuring system name ····································································································································· 35
Configuring web idle timeout period ·················································································································· 35
Device maintenance configuration ···························································································································37
Software upgrade ·························································································································································· 37
Reboot ············································································································································································· 38
Diagnostic information ·················································································································································· 39
System time configuration··········································································································································41
Displaying the system time ············································································································································ 41
Configuring the system time·········································································································································· 42
ii
Log management configuration ································································································································43
Displaying syslog ·················································································································································· 43
Setting the log host························································································································································· 44
Setting buffer capacity and refresh interval ················································································································ 45
Configuration management·······································································································································47
Backing up configuration ·············································································································································· 47
Restoring configuration·················································································································································· 47
Saving configuration······················································································································································ 48
Initializing configuration················································································································································ 49
File management configuration·································································································································50
Displaying file list··························································································································································· 50
Downloading a file ························································································································································ 50
Uploading a file ····························································································································································· 51
Removing a file······························································································································································· 51
Specifying the main boot file········································································································································ 51
Interface management configuration························································································································52
Displaying interface information and statistics ··········································································································· 52
Creating an interface····················································································································································· 54
Modifying a Layer 2 interface ······································································································································ 56
Modifying a Layer 3 interface ······································································································································ 59
Interface management configuration example ··········································································································· 61
TR-069 configuration ·················································································································································63
TR-069 configuration ····················································································································································· 63
Configuration guidelines ··············································································································································· 65
User management configuration·······························································································································66
Creating a user······························································································································································· 66
Setting the super password ··········································································································································· 67
Switching the user access level to the management level ························································································· 68
SNMP configuration ··················································································································································69
SNMP overview······························································································································································ 69
Configuration task list ···················································································································································· 69
Enabling SNMP······························································································································································ 71
Configuring an SNMP view·········································································································································· 72
Creating an SNMP view······································································································································· 72
Adding rules to an SNMP view ··························································································································· 74
Configuring an SNMP community ······························································································································· 74
Configuring an SNMP group········································································································································ 75
Configuring an SNMP user··········································································································································· 77
Configuring SNMP trap function·································································································································· 79
Displaying SNMP packet statistics ······························································································································· 81
SNMP configuration example ······································································································································ 81
Loopback configuration·············································································································································87
Loopback operation······················································································································································· 87
Configuration guidelines ··············································································································································· 88
MAC address configuration······································································································································89
Configuring a MAC address entry······························································································································· 90
Setting the aging time of MAC address entries·········································································································· 91
MAC address configuration example·························································································································· 92
iii
VLAN configuration ···················································································································································94
Overview········································································································································································· 94
Recommended configuration procedure······················································································································ 94
Creating a VLAN···························································································································································· 95
Modifying a VLAN························································································································································· 95
Modifying a port ···························································································································································· 96
VLAN configuration example········································································································································ 98
Configuration guidelines ··············································································································································· 99
ARP configuration ··················································································································································· 101
Overview·······································································································································································101
Introduction to ARP··············································································································································101
Introduction to gratuitous ARP····························································································································101
Displaying ARP entries·················································································································································101
Creating a static ARP entry ·········································································································································102
Removing ARP entries ··················································································································································103
Configuring gratuitous ARP·········································································································································103
Static ARP configuration example ······························································································································104
IGMP snooping configuration ································································································································ 105
Recommended configuration procedure····················································································································106
Enabling IGMP snooping globally ·····························································································································106
Configuring IGMP snooping on a VLAN···················································································································107
Configuring IGMP snooping on a port······················································································································108
Displaying IGMP snooping multicast entry information···························································································110
IGMP snooping configuration example·····················································································································111
IPv4 and IPv6 routing configuration ······················································································································ 114
Overview·······································································································································································114
Displaying the IPv4 active route table ·······················································································································114
Creating an IPv4 static route·······································································································································115
Displaying the IPv6 active route table ·······················································································································117
Creating an IPv6 static route·······································································································································118
IPv4 static route configuration example·····················································································································119
IPv6 static route configuration example·····················································································································121
Configuration guidelines ·············································································································································123
DHCP overview ······················································································································································· 124
Recommended configuration procedure····················································································································124
Enabling DHCP ····························································································································································125
Creating a static address pool for the DHCP server ································································································125
Creating a dynamic address pool for the DHCP server ··························································································127
Enabling the DHCP server on an interface················································································································129
Display the information of assigned IP addresses ····································································································129
DHCP server configuration example··························································································································130
DNS configuration ·················································································································································· 133
Overview·······································································································································································133
Static domain name resolution···························································································································133
Dynamic domain name resolution·····················································································································133
Recommended configuration procedure····················································································································133
Configuring static name resolution table ··········································································································133
Configuring dynamic domain name resolution································································································134
Configuring static name resolution table···················································································································134
Configuring dynamic domain name resolution ········································································································135
Adding a DNS server address ···································································································································135
iv
Adding a domain name suffix ····································································································································136
Clearing dynamic DNS cache····································································································································136
DNS configuration example ·······································································································································136
PPPoE ······································································································································································· 141
Overview·······································································································································································141
Configuring PPPoE client ·············································································································································141
Displaying PPPoE client session statistics···················································································································143
Displaying PPPoE client session summary information·····························································································144
PPPoE client configuration example ···························································································································145
Configuration guidelines ·············································································································································147
Service management ·············································································································································· 148
Overview·······································································································································································148
Configuring service management ······························································································································149
Diagnostic tools······················································································································································· 151
Overview·······································································································································································151
Ping·······································································································································································151
Trace route ···························································································································································151
Ping operation ······························································································································································152
IPv4 ping operation·············································································································································152
IPv6 ping operation·············································································································································153
Trace route operation ··················································································································································155
Web overview························································································································································· 157
Logging in to the web interface··································································································································157
Logging out of the web interface································································································································158
Introduction to the web interface································································································································158
Web user level ·····························································································································································159
Introduction to the web-based NM functions ············································································································159
Common web interface elements ·······························································································································167
Configuration guidelines ·············································································································································171
Troubleshooting web browser ····································································································································172
Failure to access the device through the web interface ··················································································172
Radio configuration ················································································································································ 175
Configuring radio ························································································································································175
Configuring data transmit rates··································································································································179
Configuring 802.11a/802.11b/802.11g rates····························································································179
Configuring 802.11n MCS································································································································180
Configuring calibration ···············································································································································183
Channel calibration information························································································································183
Parameter setting·················································································································································184
Configuring channel scanning····································································································································186
Configuring channel scanning parameters ······································································································186
Configuring AP operating mode ·······················································································································188
Configuring channel detection ···································································································································190
Displaying detection record ·······························································································································190
Configuring the detection record aging time ···································································································191
Displaying history record····································································································································191
Antenna ································································································································································192
AAA configuration ·················································································································································· 193
AAA overview ······························································································································································193
Configuring AAA ·························································································································································194
Configuration prerequisites ································································································································194
v
Recommended configuration procedure···········································································································194
Configuring an ISP domain································································································································194
Configuring authentication methods for the domain ·······················································································195
Configuring authorization methods for the domain ························································································197
Configuring accounting methods for the domain ····························································································199
AAA configuration example ·······································································································································200
RADIUS configuration············································································································································· 204
RADIUS overview ·························································································································································204
Configuring a RADIUS scheme···································································································································204
RADIUS configuration examples·································································································································210
Configuration guidelines ·············································································································································217
HWTACACS configuration ···································································································································· 219
HWTACACS overview ················································································································································219
Configuring HWTACACS ···········································································································································219
Recommended configuration procedure···········································································································219
Creating HWTACACS scheme system··············································································································220
Configuring HWTACACS servers ·····················································································································220
Configuring HWTACACS parameters··············································································································221
HWTACACS configuration example ·························································································································224
Configuration guidelines ·············································································································································229
User configuration··················································································································································· 231
User overview·······························································································································································231
Configuring a local user··············································································································································231
Configuring a user group············································································································································234
Configuring a guest ·····················································································································································235
Procedure for a management level administrator to configure a guest·························································235
Procedure for a guest administrator to configure a guest···············································································237
Certificate management ········································································································································· 238
PKI overview ·································································································································································238
Configuring PKI ····························································································································································238
Recommended configuration procedure for manual request··········································································239
Recommended configuration procedure for automatic request······································································240
Creating a PKI entity ···········································································································································241
Creating a PKI domain ·······································································································································242
Generating an RSA key pair······························································································································245
Destroying the RSA key pair ······························································································································246
Retrieving and displaying a certificate ·············································································································246
Requesting a local certificate ·····························································································································247
Retrieving and displaying a CRL························································································································248
PKI configuration example ··········································································································································249
Configuration guidelines ·············································································································································254
Wireless service ······················································································································································ 255
Access service ······························································································································································255
Terminology ·························································································································································255
Wireless client access·········································································································································255
WLAN data security ···········································································································································259
Client access authentication·······························································································································260
802.11n·······························································································································································262
Introduction to WDS ····················································································································································262
Advantages of WDS ···········································································································································262
WDS network topologies ···································································································································262
Repeater mode overview·············································································································································264
vi
Workgroup bridge mode overview ···························································································································264
Configuring wireless service ·································································································································· 266
Configuring access service ·········································································································································266
Recommended configuration procedure···········································································································266
Creating a wireless service ································································································································266
Configuring clear type wireless service ············································································································267
Configuring crypto type wireless service··········································································································276
Security parameter dependencies ·····················································································································283
Binding an AP radio to a wireless service········································································································284
Enabling a wireless service ································································································································284
Enabling a radio ·················································································································································284
Configuring WDS service ···········································································································································285
Configuring WDS service···································································································································285
Configuring a neighbor MAC address·············································································································286
Configuring advanced WDS settings················································································································286
Configuring global WDS····································································································································289
Configuring a working channel·························································································································289
Enabling WDS service········································································································································290
Configuring the repeater service································································································································290
Configuring the workgroup bridge ····························································································································291
Enabling the client mode ····································································································································291
Connecting the wireless service·························································································································292
Displaying statistics ·············································································································································293
Wireless access configuration examples···················································································································294
Wireless service configuration example···········································································································294
Access service-based VLAN configuration example························································································296
WPA-PSK authentication configuration example ·····························································································298
Local MAC authentication configuration example···························································································303
Remote MAC authentication configuration example·······················································································307
Remote 802.1X authentication configuration example···················································································316
Dynamic WEP encryption-802.1X authentication configuration example····················································328
802.11n configuration example ·······················································································································334
WDS configuration examples·····································································································································337
WDS configuration example······························································································································337
WDS point-to-multipoint configuration example ······························································································340
Repeater mode configuration example······················································································································341
Workgroup bridge mode configuration example ····································································································345
Configuring ACL and QoS····································································································································· 349
Overview·······································································································································································349
Introduction to ACL··············································································································································349
Introduction to QoS·············································································································································349
Configuring an ACL·····················································································································································350
Recommended configuration procedures ·········································································································350
Adding a time range···········································································································································351
Adding an IPv4 ACL ···········································································································································352
Configuring a rule for a basic IPv4 ACL···········································································································353
Configuring a rule for an advanced IPv4 ACL·································································································355
Configuring a rule for an Ethernet frame header ACL ····················································································358
Adding an IPv6 ACL ···········································································································································360
Configuring a rule for a basic IPv6 ACL···········································································································361
Configuring a rule for an advanced IPv6 ACL·································································································363
Configuring priority mapping·····································································································································365
Overview······························································································································································365
vii
Configuration procedure ····································································································································365
Configuring a QoS policy···········································································································································367
Recommended QoS policy configuration procedure ······················································································367
Adding a class·····················································································································································368
Configuring classification rules··························································································································369
Adding a traffic behavior ···································································································································372
Configuring actions for a traffic behavior ········································································································373
Adding a policy···················································································································································376
Configuring classifier-behavior associations for the policy ············································································376
Applying a policy to a port································································································································377
Applying a QoS policy to a wireless service ···································································································378
ACL/QoS configuration example ······························································································································380
Network requirements·········································································································································380
Configuration procedure ····································································································································380
Verifying the configuration·································································································································389
Configuration guidelines ·············································································································································389
Configuring wireless QoS ······································································································································ 390
Overview·······································································································································································390
Terminology ·························································································································································390
WMM protocol overview ···································································································································391
Enabling wireless QoS ················································································································································392
Setting the SVP service ················································································································································393
Setting CAC admission policy····································································································································394
Setting radio EDCA parameters for APs····················································································································394
Setting EDCA parameters for wireless clients ···········································································································396
Displaying radio statistics············································································································································397
Displaying client statistics············································································································································399
Setting rate limiting ······················································································································································400
Configuring the bandwidth guarantee function········································································································401
Setting the reference radio bandwidth ·············································································································401
Setting guaranteed bandwidth ··························································································································402
Enabling bandwidth guarantee ·························································································································403
Displaying guaranteed bandwidth settings ······································································································404
Wireless QoS configuration examples ······················································································································404
CAC service configuration example ·················································································································404
Static rate limiting configuration example ········································································································406
Dynamic rate limiting configuration example ··································································································407
Bandwidth guarantee configuration example··································································································408
Advanced settings··················································································································································· 411
Advanced settings overview ·······································································································································411
District code ·························································································································································411
Switching to fit AP mode ····································································································································411
Continuous transmitting mode····························································································································411
Uplink interface monitoring ································································································································411
Channel busy test ················································································································································412
Band navigation ··················································································································································412
Configuring multicast optimization····················································································································412
Configuring WLAN advanced settings······················································································································413
Setting a district code ·········································································································································413
Switching the AP to operate in fit AP mode ·····································································································414
Configuring continuous transmitting mode ·······································································································414
Configuring uplink interface monitoring ···········································································································416
Configuring a channel busy test ························································································································416
viii
Configuring band navigation·····························································································································417
Configuring multicast optimization····················································································································419
Advanced settings configuration examples···············································································································421
Band navigation configuration example···········································································································421
Multicast optimization configuration example ·································································································423
WLAN security configuration································································································································· 425
WLAN security overview·············································································································································425
WIDS attack detection ········································································································································425
Blacklist and white list·········································································································································426
Configuring WIDS ·······················································································································································426
Configuring WIDS···············································································································································426
Displaying history record····································································································································427
Displaying statistics information·························································································································427
Configuring the blacklist and white list functions ·····································································································428
Configuring dynamic blacklist ···························································································································428
Configuring static blacklist ·································································································································429
Configuring white list ··········································································································································429
User isolation··························································································································································· 431
Configuring user isolation ···········································································································································431
Index ········································································································································································ 432
1
About the WA series access points Web-based
configuration guide
The H3C WA series access points Web-based configuration guide describes the software features for the
H3C WA series access points and guide you through the software configuration procedures. These
configuration guides also provide configuration examples to help you apply software features to different
network scenarios.
Applicable models and software versions
The H3C WA series access points include WA2600 series and WA3600 series. This document
describes the software features for only fat APs. Table 1 shows the applicable models and software
versions.
Table 1 Applicable models and software versions
Series Model
WA2600 series
WA2600 series access points (indoors)
WA2612-AGN
WA2620-AGN
WA2610i-GN
WA2620i-AGN
WA2600 series access points (enhanced) WA2610E-AGN
WA2620E-AGN
WA2600 series access points (outdoors) WA2620X-AGNP
WA3600 series WA3600 series access points (indoors)
WA3610i-GN
WA3620i-AGN
WA3628i-AGN
Feature matrix
•Support of the H3C WA series access points for features may vary by device model.
•The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
•The displayed Web pages may vary depending on your AP model.
•The terms AP and fat AP in this document can refer to wireless bridges with fat AP functions.
2
Table 2 Feature matrix
Module Feature WA2600 series
WA3600 series
Device
Optical Ethernet interface Supported on the
WA2620X-AGNP Not supported.
Device maintenance
The "File Type" and "If a file
with the same name already
exists, overwrite it without
any prompt" options in
software upgrade are
supported on the
WA2610i-GN and
WA2620i-AGN.
The "File Type" and "If a
file with the same name
already exists, overwrite it
without any prompt"
options in software
upgrade are supported.
Interface management
Configuration of IPv6
address for an interface is
supported.
The maximum Ethernet
frame length allowed by an
Ethernet interface is 1536
bytes for the
WA2610-AGN,
WA2612-AGN, and
WA2620-AGN and 1600
bytes for the other models.
Configuration of IPv6
address for an interface is
supported.
The maximum Ethernet
frame length allowed by
an Ethernet interface is
1600 bytes.
Wireless service Fast association
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
Radio
Radio
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP model.
To check whether a radio
mode is supported, see the
corresponding list on the
web page.
802.11n bandwidth mode
is supported.
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP
model. To check whether a
radio mode is supported,
see the corresponding list
on the web page.
802.11n bandwidth
mode is supported.
Rate
Support for
802.11a/b/g/n depends
on your AP model.
If a radio mode is not
supported, it is displayed as
gray on the web page.
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP
model.
If a radio mode is not
supported, it is displayed
as gray on the web page.
MCS index Up to 15. Up to 23.
Advanced settings
Band navigation
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
3
Quick Start
The Quick Start wizard leads you through basic configuration procedures to quickly make your device
available for use.
Quick Start wizard home page
From the navigation tree, select Quick Start to enter the home page of the Quick Start wizard.
Figure 1 Home page of the Quick Start wizard
Basic configuration
1. On the home page of the Quick Start wizard, click start.
The basic configuration page appears.
4
Figure 2 Basic configuration page
2. Configure the parameters as described in Table 3.
Table 3 Configuration items
Item Descri
p
tion
System Name Specify the name of the current device.
By default, the system name of the device is the device model.
Country/Region Code
Select the code of the country where you are. This field defines the radio frequency
characteristics such as the power and the total number of channels for frame
transmission. Before configuring the device, you need to configure the country
code correctly. If the Country Code field is grayed out, it cannot be modified.
Time Zone Select a time zone for the system.
Time Specify the current time and date.
Admin configuration
1. On the basic configuration page, click Next.
The admin configuration page appears.
5
Figure 3 Admin configuration page
2. Configure the parameters as described in Table 4.
Table 4 Configuration items
Item Descri
p
tion
Password Specify the password for user Admin to use to log into the device, in cipher text.
Confirm Password Enter the password again to confirm the password.
Password Encryption
Select the attribute for the password encryption method:
•Reversible
•Irreversible
IP configuration
1. On the Admin Configuration page, click Next.
The IP configuration page appears.
6
Figure 4 IP configuration page
2. Configure the parameters as described in Table 5.
Table 5 Configuration items
Item Descri
p
tion
IP Address
Specify the IP address of VLAN-interface 1. This IP address is used for logging in to
the device.
By default, the IP address of VLAN-interface 1 is 192.168.0.50 .
Mask Specify the IP address mask of VLAN-interface 1.
By default, the mask is 24-bit long.
Default Gateway
Specify the IP address of the default gateway that connects the device to the
network.
By default, no default gateway is available.
Wireless configuration
1. On the IP configuration page, click Next.
The wireless configuration page appears.
7
Figure 5 Wireless configuration page
2. Configure the parameters as described in Table 6.
Table 6 Configuration items
Item Descri
p
tion
Primary Service
Authentication type
Select the authentication type for the wireless service, which can be:
•None—Performs no authentication.
•User authentication (802.1X)—Performs 802.1X authentication.
The default authentication type is None. In that case, skip the 5/8: Radius
Configuration step.
Wireless Service Specify the Service Set Identifier (SSID).
Encrypt
Select this box to go to the 6/8: Encryption Configuration step.
By default, no encryption is performed. If this option is not selected, the 6/8:
Encryption Configuration step is skipped.
RADIUS configuration
1. On the wireless configuration page, select User authentication (802.1X) for the Primary Service
Authentication Type field.
2. Click Next.
3. The RADIUS configuration page appears.
Other manuals for WA2612-AGN
1
This manual suits for next models
9
Table of contents
Other H3C Wireless Access Point manuals
H3C
H3C WA2612-AGN User manual
H3C
H3C WA4600 Series User manual
H3C
H3C WA6020 User manual
H3C
H3C WA530 Instruction Manual
H3C
H3C WA2200 Series User manual
H3C
H3C WA5300 Series Instruction Manual
H3C
H3C WA2600 Series Installation manual
H3C
H3C WA6600 Series Instruction Manual
H3C
H3C WA6120X User manual
H3C
H3C WA Series User manual
H3C
H3C WA6120 User manual
H3C
H3C WA2210-AG_INDOORSINGLEBANDAP User manual
H3C
H3C WA2620-AGN User manual
H3C
H3C WA6520H User manual
H3C
H3C WA4600 Series User manual
H3C
H3C WA5320 User manual
H3C
H3C WA2210-AG User manual
H3C
H3C WA2610E-AGN User manual
H3C
H3C WA536 User manual
H3C
H3C WA Series Installation manual
Popular Wireless Access Point manuals by other brands
ANTAIRA
ANTAIRA APN-210N user manual
Ruijie
Ruijie RG-AP680 CD Series Hardware installation and reference guide
LevelOne
LevelOne WAP-6110 Quick installation guide
Amped Wireless
Amped Wireless APA2600M Installation and configuration
Hotpoint
Hotpoint HotPoint 5200 Installation & setup guide
Aironet
Aironet 2000 series user guide
