Microtech e-tab Instruction manual

ENG 01/2016 Rev 1.1
www.e-tab.it
QUICK USER GUIDE

2
QUICK USER GUIDE
English version

Microtech e-tab 3
INDEX
Acknowledgements 39
Package contents 40
Overview
Recharge your e-tab
Safety precautions for power supply and
battery
41
43
44
Warnings 45
Updates management
Android L
How to use a memory card
Windows 10
Remix OS
Dual Boot
48
51
49
52
53
57

4
CE mark
Environmental protection
Technical assistance and support
Technical datasheet 61
64
66
69
Features 59

Microtech e-tab 5
ACNOWLEDGMENTS
Thank you for purchasing e-tab.
This product was designed to take advantage of
the mobility and the direct interaction through the
touch screen, 3G connectivity, Wi-Fi and Bluetooth,
ensuring different user experiences, such as study,
entertainment, business and the ofce job.
Microtech team
Trademark protection
e-tab is a registered trademark of Microtech.
All registered trademarks and copyrights belong to their
rightful owners.

6
PACKAGE CONTENT
www.microtechsrl.com
If something is missing or damaged, please contact the
manufacturer and save the entire package for transport.
e-tab
Power supply
USB cable
OTG cable
User manual in Italian/
English
e-sound earphones

Microtech e-tab 7
OVERVIEW
169,5 mm
240 mm
7,9 mm

8
Your e-tab
Rear camera
Front camera
Touch screen panel
Speakers
Sim slot
USB port
Audio Jack port
Micro
HDMI
SD slot with charging and data
exchange function
Start and power
off key
Volume key

Microtech e-tab 9
Recharge your e-tab
Connect the at cable to the power supplier.
Insert the Micro-USB connector in the tablet.
Plug the power charger into a grounded power outlet.

10
Safety precautions for power supply and battery
Use the correct external power source.
The power adapter of this product can only be used with
the type of power source indicated on the electrical ratings
label. If you are not sure of the type of power source
required please contact an authorized Microtech support
center.
Battery pack care
The product contains a lithium polymer battery. The
misuse of the battery pack can result in the risk of re or
burns. Do not attempt to open or x the battery pack.
Device charging
Make sure to fully charge your e-tab before using it in
battery mode for extended periods. Remember that the
power adapter charges the battery during the whole time
in which it is connected to an AC power source. Keep in
mind that it takes much longer to charge the battery when
e-tab is powered on.
Do not leave e-tab connected to the power source when
the battery is fully charged.
e-tab is designed to remain connected to an electrical
source for long periods of time.

Microtech e-tab 11
WARNINGS
Use only the power adapter and the included micro USB
cable to charge the battery of your e-tab. Using a different
power adapter could damage the tablet.
Make sure you plug the power adapter into the power
outlet with the correct input rating. The adapter output
voltage is DC 5.0V, 2.5A.
Your e-tab can be charged through the USB port of your
computer when it is in sleep mode (screen off) or powered
off.
Recharging the battery through the USB port of a
computer may take longer than normal.
If your computer does not provide enough power to charge
e-tab we suggest you load it via a grounded power outlet.

12
Be careful not to drop the device or bump it against
objects, it may cause damages not covered by the
standard warranty.
Avoid using your device with wet hands in order to avoid
unexpected electrical discharges.
All wireless devices are susceptible to interference, which
could affect performance.
Do not use chemicals or detergents to clean the tablet,
they may corrode the surface.
The contact with water, sand or prolonged exposure to
high temperatures may cause an irreparable damage.
Do not expose your device to damp environments, rain or
extremely hot environments.
e-tab should be charged at least every 3 months
Keep your tablet away from high magnetic elds: they
may damage the device.

Microtech e-tab 13
It is recommended to keep the volume at a safe level to
preserve your health. Lasting exposure to high volume
sounds may cause hearing damage.
The use of original accessories is recommended, which
can be purchased through the website www.e-tab.it
Only qualied personnel authorized by Microtech can
repair the tablet.
Do not use the tablet in petrol stations or near fuels or
chemicals.

14
During software updates or during download operations
do not remove the power supply, it may cause irreversible
data loss.
Any tampering with the software may generate additional
costs for recovery.
Updates management

Microtech e-tab 15
HOW TO USE A MEMORY CARD
Installing a memory card
Open the cover of the memory card slot.
Push the memory card into the slot until it locks in
place.
e-tab supports memory cards with a maximum capacity
of 128 GB. Depending on the memory card manufacturer
and type, some memory cards may not be compatible
with your device.
• Some memory cards may not be fully compatible with
the device. Using an incompatible card may damage the
device or the memory card, or corrupt the data stored in it.
• Beware to insert the memory card from the right side.
• The device supports the FAT and the exFAT le systems
for memory cards. When inserting a card formatted in
a different le system, the device asks to reformat the
memory card.
• Frequent writing and erasing of data shortens the
lifespan of memory cards
1
2

16
Removing the memory card
Do not remove the memory card while the device is
transferring or accessing information. Doing so can cause
data to be lost or corrupted or can damage to the memory
card or device. Microtech is not responsible for losses
that result from the misuse of damaged memory cards,
including the loss of data.
Before removing the memory card, deactivate it for safe
removal.
Formatting the memory card
A memory card formatted on a computer may not be
compatible with the device. Format the memory card on
the device.
Before formatting the memory card, remember to make
backup copies of all important data stored in the device.
The manufacturer’s warranty does not cover loss of data
resulting from user actions.

Microtech e-tab 17
ANDROID LOLLIPOP
Press and release the power button on the top left of the
tablet
Power off
Lock the screen
Press the power button
Changing the Language of the System
Go to: Settings> Language & input> Language>
Select language
Hold for a few seconds the power button
> Select power off
Start

18
WINDOWS 10
Press and release the power button on the top left of the
tablet
Power off / Reboot
Lock the screen
Press the power button
Cambio della lingua di sistema
Go to: Settings> Date/Time and language> Geographical
area and language
From the Start screen, press the power button
> Stand by / Power off/ Reboot
Start

Microtech e-tab 19
REMIX OS
Press and release the power button on the top left of the
tablet
Power off / Reboot
Lock the screen
Press the power button
Changing Language System
Go to: Settings> Language & input> Language>Select
language
Hold for a few seconds the power button
> Select power off
Start

20
KEY ELEMENTS
The system supports both the gestures that the interaction
with the mouse.
Taskbar
At the bottom of the screen, a taskbar allows you to launch
applications and switch from an application to another.
Mouse Support