详细说明
First use:
When unpacking for the first time, please compare the frequency between the transmitter and receiver. After
successful frequency comparison, the transmitter and receiver will receive Conduct short distance testing
on the machine, holding the transmitter 10 to 15 meters away from the receiver, and shaking the transmitter
Rocker to observe if the model is controlled by the transmitter. If controlled, it indicates that the transmitter
and receiver are working properly.
DIGITAL PROPORTIONAL R/CSYSTEM
www.microzone.cn
2.4GHz
FHSS
Taking MC6RE-V2 as an example
FM button
Frequency pairing:
After the remote control is turned off and the receiver is powered on, press the frequency control button on
the receiver, and the indicator light will flash quickly, the receiver will enter the frequency control mode, as
shown in the following figure, then, turn on the remote control, and the receiver indicator light will turn on,
the receiver will receive the signal normally.
