SKYDANCE R2 User manual

Technical Parameters
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Output signal Zigbee 3.0
Working voltage 3VDC(CR2032)
Working current <15mA
Standby current <16μA
Standby time 1 year
Remote distance 30m(Barrier-free space)
Warranty
5 years
Warranty
Gross weight
Size
Package
L138x W50 x H22mm
Mechanical Structures and Installations
1
User Manual Ver 1.0.1
Features
Model No.: R2(WZS)
10-key/Zigbee 3.0/Wireless remote 30m distance/CR2032 battery
10-Key CCT Zigbee 3.0 Remote Controller
● Apply to dual color LED controller or driver.Zigbee 3.0
● Built-in Tuya Zigbee 3.0 remote module, supports scenario linkage and one-click execution.
● Each remote can match one or more receiver.
● R bC 2032 attery powered.
● Operate with LED indicator light.
● White & Black available.
LVDRED
0.064kg
: Turn on/off light.
: Network pairing
: Adjust brightness, short press 11 levels, 10% step.
LED indicator
: Adjust color temperature, short press 11 levels, 10% step.
: Short press to recall the scene 1-4.
Key function
S3 S4
CT
-
CT+
S1 S2
+
-
S3 S4
CT
-
CT+
S1 S2
+
-
Before use the remote, please edit the scene setting through Tuya APP firstly.
11mm
135mm
40mm
Note: Before the first use,
please remove the protective film on the battery.
CR2032 Battery
Back holder
To fix the remote, three options are offered for selection:
Option 1: fix the remote' back holder on the wall with two screws.
Option 2: adhere the remote' back holder to the wall with paster.
44.50 mm
70.00 mm
36.00 mm

There are 8 scenes in the Tuya APP, which can be set to lighting scenes or linkage scenes.
Lighting scene is used for the overall control of multiple lamps, like the light adjustment of the entire room.
Linkage scene is used for linkage control of different equipment, such lamps and curtains on and off together.
Example 1, set scene 1 for synchronous light control of the whole room:
(1) Select scene 1 and open the lighting scene settings.
(2) You can change the scene name, add one or more devices, adjust brightness and , then save it.color temperature
(3) After successful setting, you can use the remote to control these lamps directly.
Example 2, set scene 2 to set up a scenario where different lamps or curtains are controlled together with different color or on/off state.
(1) Select Scene 2 and open the linkage scene settings.
(2) You can change the scene name, add "one-click execution" tasks, select the devices that need to be linked, save the required functions, such as
ON/OFF, mode, brightness and .color temperature
(3) After successful setup, you can use the remote to directly control all linked devices to the desired scene.
2
User Manual Ver 1.0.1
2. Remote association and scene settings
App Operating Instructions
● Download the Tuya APP and register anaccount, search and add the Tuya Zigbee gateway device.
Press and hold the "Network pairing" button until the LED indicator light flashes.●
Under the gateway, you can find WZS-Scene Panel device in Tuya APP.
After successful network pairing, the indicator light will be on for 2 seconds and then off.
Under the gateway, search and add one or more ZBS-CCT light devices.●
Remote unpairing: Delete the WZS-Scene Panel device from the tuya APP.●
1. Network pairing
Note:
The scene1-4 in Tuya APP is correspond to the scene 1-4 key on the remote.●
To delete the scene function, you can select "Reset" in the scene settings.●
Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. Gently handle remote, beware of falling.
4. For indoor and dry location use only.