详细说明
DIGITAL PROPORTIONAL R/CSYSTEM
www.microzone.cn
2.4GHz
FHSS
Low voltage alarm:
When the voltage of 4 x 5 batteries is lower than 4V, and the voltage of 2 x Li-ion batteries is lower than 7V, a
ticking sound will be made, and the remote control power indicator will blink, indicating that the power is low
and needs to be charged.
First use:
When unpacking for the first time, please compare the frequency between the transmitter and receiver. After
successful frequency comparison, the transmitter and receiver will receive Conduct short distance testing
on the machine, holding the transmitter 10 to 15 meters away from the receiver, and shaking the transmitter
Rocker to observe if the model is controlled by the transmitter. If controlled, it indicates that the transmitter
and receiver are working properly.
Frequency pairing:
After the remote control is turned off and the receiver is powered on, press the frequency control button on
the receiver, and the indicator light will flash quickly, the receiver will enter the frequency control mode, as
shown in the following figure, then, turn on the remote control, and the receiver indicator light will turn on,
the receiver will receive the signal normally.
FM button
Suggestions for safe shutdown:
To ensure the safety of the aircraft model and oneself, after the aircraft model motor stops running, first turn
off the power supply of the model, and then turn it off again Turn off the transmitter power.
