详细说明
First time use:
The first time you unpack the use of the remote control machine and receiver for frequency pairing,
frequency pairing after the success of the remote control and receiver for a short distance distance test,
hand holding the remote control from the receiver 10 to 15 meters away, in the remote control rocker, to
observe whether the equipment is controlled by the remote control, if controlled that the remote control and
the receiver is working properly.
DIGITAL PROPORTIONAL R/CSYSTEM
www.microzone.cn
Frequency pairing:
After the remote control is turned off and the receiver is powered on, the power/signal transceiver lamp is on.
Press the frequency pairing button on the receiver, the power/signal transceiver lamp and the system
operation lamp flash alternately to indicate that the receiver is in the frequency pairing mode, then turn on
the remote control, the power/signal transceiver lamp on the receiver blinks slowly and the system operation
lamp blinks fast to indicate that the frequency pairing has been successful.
2.4GHz
FHSS
Low voltage alarm:
When the voltage of the remote control is lower than 6.8V, it will tick and the battery icon will flash,prompting
you that the power is low, please charge it as soon as possible.
Safe Shutdown Recommendation:
To ensure the safety of your equipment and yourself, turn off the power to the equipment first and then to the
remote control after the equipment motor has stopped running.
FM button
Power/signal transceiver lamps System operation light
