MID WEST PRODUCTS LC-R08 User manual

©2019 Mid West Products, Inc. -1- Form No. M8-1728
LOG CART –MODEL LC-R08
Owner’s Manual and Parts List
SAVE THIS MANUAL
You will need this manual for the safety instructions, assembly instructions and parts list. Put it in a
safe, dry place for future reference.
Additional Information/Link to PDF Copy of this Manual:
WARNING
•Read instructions and Warnings before set up and use.
•Check to insure product is not damaged prior to use. If product is damaged, do not use.
•Do not exceed cart’s weight capacity of 200 lb.
•Do not exceed each tire’s maximum permissible inflation pressure of 30 psi.
•Only use product as intended. Do not attempt to jump or stand on product.
•Not for use by unsupervised children.

©2019 Mid West Products, Inc. -2- Form No. M8-1728
•Please read and understand these Instructions
before assembling your Log Cart.
•Check that you have all components.
•Screwdriver and Wrench required for assembly.
Assembly Instructions:
Step 1: Insert Wheel Axle (#5) between the two
Side Frames (#3).
Key
Part No.
Description
Image
Qty
1
52-0001
Handle
1
2
52-0002
Front
1
3
52-0003
Sides
2
4
52-0004
Wheel & Tire
2
5
52-0005
Axle
1
6
52-0006
Bolt
4
7
52-0007
Nut
4
8
52-0008
Cotter Pin
2
9
52-0009
Washer
4
Step 2: Attach one Wheel (#4) on each side of the
Axle (#5) and secure with Washers (#9)
and Cotter Pin (#8). One or two Washers
(#9) may be used to obtain desired
tightness.
Step 3: Attach Top Handle (#1) by inserting into
the Side Frames (#3) above the Wheels.
Step 4: Attach Front Bar (#2) by inserting into
opposite side of Side Frames (#3).
Step 5: Secure all parts by using Screws (#6) and
Nuts (#7) as shown in the Diagram. Be
sure to tighten all the Nuts.
Log Cart –Model LC-R08
INSTRUCTIONS FOR ORDERING PARTS
(Minimum Parts Order Charge $20.00)
1. Address all parts orders or correspondence regarding customer service to one of the following:
Parts Dept.
Phone:
[phone]
Mid West Products, Inc.
P.O. Box 301
E-mail:
[e-mail]
Phillipsburg, OH 45354
Website:
www.Mid-West-Products-Inc.com
2. Write your name and address plainly (print or type).
3. Explain where and how to ship.
4. Give model number of unit.
5. Give part number from parts list, as well as a description, including color, of the part and the quantity you need.
6. Inspect all shipments you receive. If any parts are damaged or missing, file a claim with the carrier before accepting.
7. If you are returning parts, be sure to include WITH THE SHIPMENT a list of the parts with your name and address.
8. All orders for repair and replacement parts will be shipped when paid with Master Card, Visa, or personal check/money
order. Prices subject to change without notice.