Middle Atlantic Products RK-GD Series User manual

I-00189 Rev D
RK-GDXX
Glass Door
Instruction Sheet
Thank you for purchasing the RK-GDXX Glass Door. Please read these instructions thoroughly
before installing this product.
PRODUCT FEATURES
THANK YOU
- Locking door provides security
- Smoked, tempered glass provides a clean look

Page 2
# 2 Phillips Head Screwdriver or Power Driver with Bit
Door
(QTY -1)
BEFORE BEGINNING INSTALLATION
1) Move the rackrail to the recessed set of enclosure mounting holes using existing wood screws.
NOTE: When moving front rackrail to setback position, mount rail to recessed pilot holes on opposite
end of side panel. This hides the original mounting holes from view.
RACKRAIL
WOOD
SCREW
HARDWARE/ITEMS SUPPLIED
TOOLS REQUIRED
Self-Adhesive Hinge Plate
Hinge
Pivot Bushing (.347” O.D.)
Pivot Bushing (.313 O.D.)
5/8" Pan Head Wood Screw
Stop Pin
Locking Bracket
Magnet
QTY DESCRIPTION
2
2
2
2
2
2
1
1

Page 3
1) Determine desired hinge side and install
pivot bushings in top and bottom of rack.
(FIGURE A)
NOTE: Two bushing sizes are provided.
Use appropriate size bushing for your rack.
2) Remove adhesive backing and install both
hinge plates on inside of glass door. (FIGURE B)
LOCKING
BRACKET
WOOD SCREWS
(2) PAN HEAD
MAGNET
INSTALLATION
TOP HINGE
FIGURE A
HINGE
PLATES (2)
FIGURE C FIGURE D
FIGURE E
PIVOT
BUSHING
(TOP)
HINGE
PIVOT
BUSHING
(BOTTOM)
HINGE
PLATE
BOTTOM
HINGE
SCREWS (2)
FIGURE B
3) Slide bottom hinge against door and adjust so that hinge is flush with edge of door.
(FIGURE C, FIGURE D)
4) Tighten (2) screws to secure bottom hinge to hinge plate. (FIGURE C)
NOTE: Do not over tighten.
5) Pivot door into bottom pivot bushing. (FIGURE C)
6) Insert upper hinge into top pivot bushing and hold hinge in place with hand.
(FIGURE A)
7) Slide door into top hinge and adjust position of door, so that
hinge is flush with edge of door. (FIGURE D)
8) Tighten (2) screws to secure upper hinge to hinge plate.
NOTE: Do not over tighten.
9) If neccessary, adjust hinges to balance door opening gaps.
10) Attach locking bracket opposite hinge side with (2) wood
screws provided. Install magnet as shown. (FIGURE E)
PIVOT
BUSHING
(BOTTOM)
FLUSH
EDGE

11) Install the top and bottom stop pins opposite hinge side as shown. (FIGURE F)
NOTE: Pivot bushings and stop pins designed to fit snug. Tap in with handle of screwdriver if
necessary.
STOP PIN
WARRANTY
Middle Atlantic Products (the "Company") warrants the RK-GDXX Glass Door to be free from defects in material or workmanship under
normal use and conditions for a period of (1) year from date of shipment by the Company.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty
shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the
Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after
inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by parties other than the Company, or
any modification or alteration of the products. In addition, this warranty does not cover damage due to improper handling, assembly,
installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF
THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO
EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax [phone] / International Voice [phone] - Fax [phone]
middleatlantic.com - [email protected]
Middle Atlantic Canada
Voice 613-836-2501 - Fax [phone] / middleatlantic.ca - [email protected]
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
INSTALLATION (CONTINUED)
FIGURE F